How to export points that i have plotted into a text file using autocad 2013? I've tried to look on the internet and it seems you can download plug ins but i don't know if those are safe to use.
View 3 Replies
I need to export points from a plot in ASCII with the following format:
x_initial y_initial z_initial x_final y_final z_final radio type
This is for a substation grounding design.
A and B are the initial and final points of the 1st line.
When i try exporting text to a shp it just comes in as points but no text. This is with Map3d 2011.
I'm not sure if it's really recognizing it as text in the export dialogue box.
I have a Flash project I'm working on that is video with corresponding bulletpoints displayed next to it. While I've gotten it to work with embed cue points in the FLV file so that at certain times in the video the Flash movie goes to certain frames to display the relevant bullet points I haven't gotten it so that it can tell what the appropriate bullet point is if someone scrubs the video past the last cue point trigger. I found a process to do it using actionscript cue points instead of navigation cue points (via this guide: [URL], but it uses an external xml file for the cue points. My problem is that I can't figure out how to get that XML file without having to redo all the cue points manually. Is there someway to make Premiere Pro (CS3) export an xml file of the markers placed in my timeline instead of embedding them into the FLV file? Alternatively if there is a way I could extract them from the FLV file, that would be acceptible too.
View 3 Replies View RelatedMy company has just aquired Autocad2013 after using Autocad2000LT for years. My boss feels that there might be a way to export the text in a drawing as a table.
View 3 Replies View Relatedi need to export 7 million points from a tin surface to text file with only NEZ in comma delimited format for Surfer 9 software. right now i have the civil 3d surface. but the export to csv stock reporting tool sucks. why the hell do you open the file and why leave an empty row between data points? so it's not usable.
also i have 12gb ram at work and it can't export surface points to autocad format ran out of memory. this is with surface display showing points and just the "dot" style so it's autocad points after export. i was originally planning on using "dataextraction" command in autocad to export to csv. worked on a small batch of file. so i think may work for the bigger file. but i would never know because i can't even get the points into autocad.
also yeah i would love to simplify the surface but it's so buggy that you asked it to remove 80% of the points it only remove 100k points at most out of 7 million. so not usable.
last resort is i can program something in vb.net but not much motivation on doing so.
I have a text file in PNEZD where D is XYZ. I have a description key for XYZ. I am importing this file into survey. When I import this file the points do not take the style of the description key, they take a default style from somewhere. What trick am I missing so that when I import points into survey they use the description key and therefore have the correct style.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I want extract a (x,y,z) point from a text file and want to put marker to that point in a dwg file. how can I accomplish that?
View 2 Replies View RelatedCode that I can run to export the handles and x y coordinates of closed polylines and show results in a text file.
View 9 Replies View RelatedI am completely new to the forum and to Autocad. I am using version 2011.
I am working with irregular solids and after I SECTION them, I would like to export to a text file the data points that make up the perimeter of the sections.
Ideally, I would like to do it from the command line, but that's a secondary goal, first of all I would like to know how to do it.
Im trying to come up with a lisp that will export x and y coords to a txt or cvs file. However, I need the lisp to export in this format
Units Inch
WPT 1 0 0 ( X=0 Y=0)
WPT 2 1 1 (X=1 Y=1)
WPT 3 2 2
I need to be able to set my zero with move origin and the export the points.
Any way using autoCAD LT 2014 to get CAD to display the elevation heights of survey points without having to type the heights in text bozes next to each individual point. i can insert a field which displays the elevation of the point but doing this again i would have to do every point individually.
Another words is there a way to select all the survey points required and get CAD to display a certain property, which in my case is the elevation height of that survey point, next to it? so it looks like x 23.35 x 23.57 etc..
I have 3 dynamic blocks with attributes representing pipes and pits in AutoCAD Map. When I export to MapInfo, MapInfo only shows points for the blocks with attributes. I think Im missing a step in the process?
View 3 Replies View RelatedTrying to export points to a csv with the object data that is attached to the point. I can use this and it works great for smaller projects, but crashes every time when I try to export a larg amount of points. The most it has successfully exported was 9000 points but on average it usually will get to 3000 points before i get a fatal error and everything crashes.
Dim CSV_FileName As String = Nothing
' navigate to the point text csv file using a file dialog
Dim dlg As New System.Windows.Forms.SaveFileDialog()
dlg.InitialDirectory = "C:"
[Code] .......
Using Civil 3D 2013. I've exported my Civil 3D points to an SDF and then to a shapefile. I cant get the "Z" elevation to come with it. Northing and Easting is correct, only problem is that is holds a zero elevation. how I can get the elevations to show correctl in the shapefile?
View 9 Replies View RelatedI am animating text so that it appears after a 3 second delay on page load. However, it does not seem to work at all. It worked for a paragraph of text, but it won't work for text that seems to be surrounded by other objects. I tried moving the animated object to the top-most layer, but that did not work.
Animating seems to be quite buggy in InDesign?
When I export text using data extraction, I make another table xls. Can I change text in the XLS file, and then update the text in my drawing to match the new text in the XLS file?
View 2 Replies View RelatedI have a timeline made in Smoke and I'm wanting to only export a section of it. In other programs I would set an In and Out point and it would export just the range I've selected, but in Smoke.
View 2 Replies View RelatedIs there any way to change the text color in the "Select File" form from the default of white to black?
View 3 Replies View RelatedI am trying to export my document to eps, but it generates an empty file without any error message. My file contains several object arrays. Can this cause a problem during the file format conversion?
View 1 Replies View RelatedHow can I draw Spline with fit points in AutoCAD 2013 .NET API using my own jig?
View 5 Replies View RelatedThere are two points and between them a lot of obstructions therefore there is not possible to link using only ome line. Is there a command to link ?
View 5 Replies View RelatedI am currently designing a logo for our company in AutoCAD. We use this logo for drawings, shirts, invoices, proposals,....etc. The logo we use was drawing by hand and is very choppy when blown up. This doesn't look good when we send the logo to make shirts and decals. I finished the logo in AutoCAD, which looks very smooth and perfect but when I try to export it in either PNG or JPEG format the logo looks choppy when zoomed in, unlike AutoCAD where it looks smooth no matter how much you zoom into it.
View 1 Replies View RelatedI'm trying to export my drawing in paper layout to PDF but it is not exporting to the correct paper size. The final export is bigger than the regular printing paper. What should I do?
View 6 Replies View RelatedI have a 3D geometry that i wanted to export as a .STL file. But every time i selected the geometry to export, i keep getting the option "Select solids or watertight meshes: Specify opposite corner:." Although the command line does show that the objects have been selected. I've tried different ways of selecting the geometry but every time it shows the same thing.
P.S - i was able to export it in other (.IGES, .IGS formats) but it doesn't seem to be working the same way with .STL
I am trying to figure out how to get autocad2014 and our company's cnc machine to communicate.
The machine uses Solid Ultimate with Screen-to-machine software.
From what ive gathered, I can save my drawing as a R12, R13, R14 version dxf file, which is what is needed for the two programs to talk to each other. The problem is, when i save the dxf file, it saves paper space, not model space. Therefore, all that comes into the cnc program is a titleblock or whatever else I had on the page in paper space.
The cnc program doesnt pick up viewports either.
I need a way to save model space as dxf.
Points began showing up in my xref'd file. When I click them, they select the xref, so they are objects and not artifacts. I can XLIST the points in the xref and turn on/off those layers but in the base file, these points do not exist anywhere.
This is the only article I could find on the mystery dots: [URL]
I tried the solution to COPYBASE, delete all, and purge, but they persist. It is happening on at least two layers.
Is there a special snap setting to snap to a point/node? I'm not talking about a endpoint or midpoint or anything like that. I mean a "node" that is set with the "POINT" command. I can't snap to any nodes I create.
View 3 Replies View Related[URL] When I use a point on an existing geometry as reference to place a new line or shape, I get a strange result when attemting to move either geometry.
As you can see in the video the two shapes will BOTH move when only ONE is selected.
Also, it seems that the shape/ lines that are not selected but still move are anchored somewhow which causes distortion.
[center]
[img]http://vidbull.com/images/logo.jpg[/img]
[b]acad.wmv[/b]
[url="http://vidbull.com/4aj8tu1ban4h.html"]http://vidbull.com/4aj8tu1ban4h.html[/url]
[/center]
I've just finished up a ground level survey. I've jotted the coordinate and levels down in my notebook and typed them up on Excel. I'm having trouble getting the coordinates from excel into AutoCAD Civil 3D 2013 version.
I'm VERY new to this sort of stuff as a trainee site engineer the most I do is simply take coordinates from a drawing to set out on site. I'm importing the points from file using Civil 3D.
I've simply saved the coordinate on excel as, for example:
430245.454 434264.654 62.321
I get this error "No point file format match found" when I try and import them. I've had a look at some Youtube videos and I'm not sure what I'm doing wrong. Maybe it's the file type I'm saving it under.
When exporting from AutoCad to pdf, from paper space, my blocks come out looking strange. I was having the same problem with text but fixed that by converting to Arial. I am exporting to an Arch E size. I have found that when I am zoomed out to show my entire campus, this is when I my problem occurs. When I am zoomed in to show a specific area, export is fine.
Using AutoCad 2014. Files saved back to version 2010.
