Photoshop :: CS6 Not Saving Current Document But Temp File OK
Jun 6, 2013
Photoshop 13.1.1 x64. Mac Pro 3.33 6-core running OSX 10.6.8, 48Gb RAM. Working on a large-ish .PSD file (650 Mb) and saving to a network drive (a Drobo connected to a server) which is our usual routine and has been for years.
Problem – When I save the document and close it, the saved file (in the correct target location) shows the correct modified time and date stamp but if you open that file up again a lot of work is missing. In this instance, about the last half hours work (since the previous time I saved it). However, if you then go to File > Open Recent and choose the file name, the document opens with all the missing up-to-date work in it.
Clearly, File > Open Recent is opening a temporary document somewhere and not the saved file in the target location.
My concern is why isn't the saved file (with correct modified time and date) up-to-date? Suddenly we are having to double check every PS file we work on and save and that is not practical.
View 1 Replies
ADVERTISEMENT
May 7, 2013
AutoCAD LT 2012
I had my automatic save set up for every 10 minutes but files were not being saved regularly. I deleted files from the Temp folder thinking it was full and now there are no .sv$ saving at all. How can I make drawings save automatically every 10 minutes?
View 6 Replies
View Related
Aug 1, 2013
Whenever I save a drawing, it goes to a temp file. I have to do a 'save as' to bring the dwg back to the original folder. Our in-office guru thought it had something to do with the new AutoCAD 360, but I have never even signed in to that, and when we did open it, nothing was in it.
View 3 Replies
View Related
Aug 21, 2012
How to save current drawing file using save method.
View 3 Replies
View Related
Feb 15, 2013
I'm working on building an action in Illustrator CS5 that will do the following..Delete the layer "original artwork"Select AllCreate OutlinesSave as PDF "content.pdf" to the current working folder with specific settings in the Save PDF prompt..Up to step 4 this is pretty simple, but so far when trying to record the saving step it insists on using the directory that I'm building the action in - not the relative one based on where the current file is opened. Also, unlike the 'Save For Web JPEG' default Illustrator action, the PDF saving step doesn't retain any of the specific settings within the action.
View 2 Replies
View Related
Dec 19, 2013
Strangely, every time I click "save" in CS6 it opens up a 'Save As' window, (which shouldn't happen), then I click save witht the existing file name (it then tells me the doc already exists), I click OK, (and then OK to the next popup window) then get the message that "This file cannot be found". I'm forced to click "ok" and the doument isn't saved. I've tried saving it differently in previous versions and it still doesn't work. I recorded a video of this behavior. You can see it here - [URL]
Why would it be trying to find a file? It seems like an error message when trying to Open a doc, not Save a doc. I can't shutdown my station until I get the document to save.
View 8 Replies
View Related
Feb 8, 2009
when I expand the document window in the client area of the user interface, the window expands completely to cover the whole screen, including the surrounding panels, menus, etc. The only thing shown is the full document window. I'm not sure if this is something that can be configured in the preferences or not. I've tried all the interface settings and nothing works.
View 1 Replies
View Related
Nov 5, 2003
My pshop temp file is very large with nothing open. I reset my prefs and it still remains the same. It was 65 megs now it is 130. Is there some other file or files I need to delete? I haven't add any filters actions etc. Pshop has the original files. I am running pshop 7 on W2K. My memory is set at 40% with no history cache and I have the pics turned off on the layers palette. Just trying to understand why it is growing even after a prefs reset. I did a print screen of a clients site and brought that into pshop to make a psd and since then the temp file has doubled. That is why I reset the prefs thinking somehow this file was still in the clipboard cache but the reset did not help the temp file size. The temp file is on a seperate hard drive for the primary and the secondary is on the E drive.
View 3 Replies
View Related
Jun 23, 2009
I have a problem with the Temp File folder. I know that photoshop cs4 uses a lot of scratch disk space and I have about 250 gbs of free space on the hard drive. I am working with very large files that exceed 4GBs at times and the free space on the hard drive is alway diminishing. Should i delete the temp files or is there a way to set how much data gets stored in the folder? Another question is, should i assign other drives for scratch disk space? i have 3 other hard drives but they are not as fast as the system hd. and if you have tips on tuning the computer for better performance would be greatly appreciated. The set up is among the following lines:ASUS motherboardIntel quad core 2.33 ghzand 32gb of RAMNvidia 9800gt
View 3 Replies
View Related
Sep 12, 2012
My photoshop recently closed with some files open. I supect windows update to be behind that but can't be sure.
I found in the %temp% folder couple files thats look interresting but no way to open them or be sure what it is.
Files are:
- Photoshop Temp21185767124 (36 864 KB) - Photoshop Temp745149862732 (1 164 672 KB)
- Photoshop Temp1555241910196 (885 632 KB)
- Photoshop Temp556628194484 (96 640KB)
... and there're 2 more at 0 KB.
Using:
- Photoshop CS5 12.1 x64
- Windows 7 Service Pack 1
View 6 Replies
View Related
Jul 23, 2013
Can the location of the temp files be changed in Photoshop CS5? NOT scratch disc assignment, that's assigned correctly. I have a storage issue in my recovery folder and there are photoshop temp files clogging that up.
View 13 Replies
View Related
Dec 11, 2013
I was always able to send photos from Photoshop 11 via the photo mail and they would arrive fully opened which was great. Now, when I send a photo it arrives not opened and if one clicks on "open" to open it, a notice says it cannot be opened because it is a zip file or a temp. file.
View 3 Replies
View Related
Mar 11, 2011
How to make a duplicate copy of current document?
so that i can do the modification with duplicate document without changing the status of original document.
View 2 Replies
View Related
Oct 16, 2012
I'd like to create a script that checks the current document's color profile and checks it against a string, for example "sRGB IEC61966-2.1". My studio has a script that performs various functions to make sure that all the layers are visible/unlocked, checks for stray points, etc., and we'd like to add a check to the color profile because we handle a large number of files and this setting is overlooked a lot.
It's alright if this value isn't writable through script (we can just pop up an alert letting the user know that they need to change it), but I can't find where to actually read this setting! We're currently working on Macs and with JavaScript, but any nudge in the right direction.
View 11 Replies
View Related
Dec 13, 2013
I am having an issue with saving our own dwg file in inventor 2014 & 2014.
When I open a new one of our dwg template files and try to say I get an error that says
"the current operation requires data from document 'xxx' but it cannot be found"
This doesnt happen when trying to save an inventor dwg template file and it has only happened since releases 2013 & 2014. If I open one of our files that was created before release 2013 I can save these with no problem.
I was hoping the issue would resolve itself when upgrading to 2014, but It hasnt, so it must be in a setting that I migrated across.
We have other users using 2013 and are not experiencing the same problem. In fact if they save one of our template files on their machine I am then able to open and save it on my machine!
View 9 Replies
View Related
Nov 5, 2013
I've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I can open this pdf file outside photoshop.no problem openning other pdf files on photoshop.
View 1 Replies
View Related
Nov 23, 2013
I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies
View Related
Dec 12, 2012
Using the VB.NET example code on exchange.autodesk.com for Defining a User Coordinate System, I pretty much copy and pasted the code to suit my needs. While the example shows how to create a UCS origin, X Axis and Y Axis from scratch, I am attempting to simply cast the values from the system variables UCSORG, UCSXDIR and UCSYDIR. These system variables are read only, and when looking into the types, I believe they are all 3D Point type values.
I'm experiencing errors when trying to run the following code, and it's making me wonder whether what I'm attempting to do is possible. The JIT Debugger is pointing out a System.InvalidCastException. Is there a problem with setting a Point3D value (from the system variable) to a Vector3D type (which is required for defining a new ucs)?
Public Sub saveCurrentUcs()
'get the current document and database
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurDb As Database = acDoc.Database
[Code]....
View 1 Replies
View Related
Jun 13, 2011
The Pagesetup isn't showing up in the Pagesetup dialog.
But when I close the drawing and open it up it's visible.
What am I missing here? Still new with this transaction concept...
<CommandMethod("aps")> _Public Sub AddPlotSetting() 'TODO: Finish Cleaning Print Function Dim s_PlotSettingsFile As String = "c: est.dwg Dim s_PageSetupName As String = "catdog" Dim s_MediaName As String = "11 x 17"
[Code]....
View 7 Replies
View Related
Dec 29, 2011
I am trying to save road centerlines with labels to an AutoCAD drawing. On the Output Tab I click Save Current Map to AutoCAD. When I open the AutoCAD drawing I created each letter in the label is a seperate text entity. Like Main St is not one entity, it is 6 different text entities.
View 3 Replies
View Related
Oct 31, 2012
System is Windows xp pro 32 bit with 3GB ram. Cannot save or even close out photoshop. Need to end task and start over again. Sometimes documant will be recovered sometimes not.
View 14 Replies
View Related
Apr 6, 2005
I have done some photography for a preexisting series.
The existing files are embedded with a unique colour profile, I ideally need to use that profile so that the new photography exactly matches colour wise, as I will be using some elements from the original files.
Is there any way to save the embedded profile, so that I can apply it to any new files that I work on?
View 9 Replies
View Related
Aug 5, 2013
I've a problem to open an old X4-Coreldraw file. The first time I can open it - when I want to save this file CDraw says that the file will be changed to the X6 Version. I say OK and save the file. The 2nd time I'll try to open the X6 file again then the Error occurs! I changed my settings in CDraw to a local dir c: emp, also to a new drive - but nothing happens! All the drives have mor than 400 GB free space! I hope this will be enough.
View 14 Replies
View Related
May 9, 2013
I've never had this issue before, but recently when I create a new document preset and go through the process of saving it, it simply doesn't save (File > New > Preset: Custom > Save Preset > Ok). I've tried reinstalling CS6, removing all other custom things I had (textures, brushes, etc.) but not matter what I do, I cannot for the life of me get custom new document presets to save anymore.
View 1 Replies
View Related
May 31, 2013
I have 300 photos that are being saved as thumbnails for my online store. I am looking to see if I am able (in automated batch saving) to add "-TN" after the document name, before the extension. It will let me add the dash but not "TN."
An example of how my document name needs to be is "MyFile-TN.gif".
View 1 Replies
View Related
Jul 10, 2013
In CorelDraw X5, I consistently at times receive an error message stating "File Copy Error. TEMP Drive or Output Drive may be full". My temp drives have all been emptied. How to overcome this error message?
View 1 Replies
View Related
Dec 25, 2013
I have saved a file in corel. on the second day, when i want to open the file,is writting: "File Copy Error" TEMP Drive or Output Drive may be Full" Is there any posibility to recover the file. The recovery toolbox can not recover the file.
View 14 Replies
View Related
Dec 12, 2012
When we publish we are always asked if we wish to save the current list of sheets.
See attached screenshot.
One of my users no longer gets this option.
Every time he publishes the program goes directly to the Save List As dialog box so he can name/save a .DSD file. He no longer gets the option of a box asking him if he wants to save the current list of sheets.
My guess is some variable got changed that has removed the option of being prompted about saving the .DSD file.
P.S. We're using AutoCAD 2012.
View 6 Replies
View Related
Dec 4, 2011
how to prevent someone from saving the doucment as PDF? I don't see any API regarding this. Is it doable or not in illustrator CS5?
View 1 Replies
View Related
Oct 3, 2012
I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 3 Replies
View Related
Nov 7, 2013
Is it possible, in AutoLISP, to code something that will save the current file (whatever it may be, assume ..dwg or .dxf, into R2000 .dxf?
View 9 Replies
View Related
