Whenever I save a drawing, it goes to a temp file. I have to do a 'save as' to bring the dwg back to the original folder. Our in-office guru thought it had something to do with the new AutoCAD 360, but I have never even signed in to that, and when we did open it, nothing was in it.
View 3 RepliesAutoCAD LT 2012
I had my automatic save set up for every 10 minutes but files were not being saved regularly. I deleted files from the Temp folder thinking it was full and now there are no .sv$ saving at all. How can I make drawings save automatically every 10 minutes?
Photoshop 13.1.1 x64. Mac Pro 3.33 6-core running OSX 10.6.8, 48Gb RAM. Working on a large-ish .PSD file (650 Mb) and saving to a network drive (a Drobo connected to a server) which is our usual routine and has been for years.
Problem – When I save the document and close it, the saved file (in the correct target location) shows the correct modified time and date stamp but if you open that file up again a lot of work is missing. In this instance, about the last half hours work (since the previous time I saved it). However, if you then go to File > Open Recent and choose the file name, the document opens with all the missing up-to-date work in it.
Clearly, File > Open Recent is opening a temporary document somewhere and not the saved file in the target location.
My concern is why isn't the saved file (with correct modified time and date) up-to-date? Suddenly we are having to double check every PS file we work on and save and that is not practical.
Is it possible that i can save a revit 2013 drawing and open it in revit 2011 file?
View 2 Replies View RelatedI have problems with saving my drawing using the save option. I click save but when i close the drawing and reopen it i realise it didnt save at all. I actually have to 'save as' to get it saved.
View 4 Replies View RelatedI have problem with 3 users from about 75. When using the publish command inAutocad 2010 (1 user) and Civil 3d 2010 (2 users) a temporary copy of the drawing is opened while the particular layout is being published but on completion this temporary copy of the drawing is not being closed. This is leading to problems when a user has lets say 5 drawings open that require publishing. When finished the user has 2 copies of each drawing open and sometimes my select the wrong drawing when making further changes.
I have tried a repair on Autcad but that did not work.
How to save active drawing file with filename..
View 9 Replies View RelatedHow to save current drawing file using save method.
View 3 Replies View RelatedWhen I try to save a 2 D drawing as a DXF file, I get a box saying "problems encountered while saving the document". I am using version 2012. My older version did this operation without a problem.
View 8 Replies View RelatedI am facing an issue while generating the thumbnail of the drawing file.
Thumbnail is generating fine for drawing file.
Once drawing file is saved using below statement,
Database.SaveAs(filePath,DwgVersion.Current);
Thumbnail generation method is returning null as given below.
byte bytCnt = br.ReadByte();
if (bytCnt <= 1) //Means bytCnt value is 1;
return null;
We use LT 2012, and recently we started having issues with file size.
Some of our drawings went from 1.5MB to 12MB after saving.
We tried saving as DXF then PURGE, -PURGE to reduce the size but always comes back.
Now, in one of the drawings I did PURGE, AUDIT, -PURGE and erased everything in the drawing, file is still 1.8MB.
Saving a file that will not let you save in the form it is in because of a "fatal error" Recovered files do not work either.
View 4 Replies View RelatedI changed the configuration in Tools/Options/Open and Save/File Save, to save as Autocad2004/LT2004 Drawing (*.dwg). But sometimes automatically the program saves as Autocad2013. It is critical for me because I work with people that still use Autocad2004.
View 6 Replies View RelatedAutoCAD 2013, 60-90 days into it, upgraded from 2007.
I have 2 of 4 workstations with this issue, AutoCAD will automtically save the file when the files is closed, w/o any prompts to verify of we want to saved or not.
I have my Options|Autosave turned off, but this should not affect the save on close it should only create a continual ac$ backup file.
This is now the 2nd time this has occured. In early March we noticed this and in dealing with AutoCAD (Suscription Service) we finally deceided to restore AutoCAD to factory defaults, which did fix the issue at the time. However it also meant that I needed to retore all the pathways and our standards. Once completed, I paid particular attention to ensuring that AutoCAD was NOT saving the file on close and it was doing so up until earlier this week, when I noticed it SAVING on close again.
Now most of you might think, hey thats a good thing, however, we routinely will test modifications to our layouts on our working files, but dont want to actually modify those files and then we would simply close the drawing w/o saving thus ensuring that those mods were not saved.
In March, both 2007 & 2013 did this, however only my 2013 is affected now.
Inventor 2009 creates XLS file when saving assembly drawing (IDW file).Why? How to get rid of that?
View 6 Replies View RelatedWhen I am working on several drawngs at the same time, I use the Publish command to plot them as a group. However to save the settings as a DSD file for future use, every open file needs to be saved. Why is this? Is there a way to disable that requirement?
There is no reason I can think of besides "by design" for this. The DSD file is only a list of drawings and their plot settings and is not dpendent in any way I can think of, to whether or not one its drawings is open and not saved.
My pshop temp file is very large with nothing open. I reset my prefs and it still remains the same. It was 65 megs now it is 130. Is there some other file or files I need to delete? I haven't add any filters actions etc. Pshop has the original files. I am running pshop 7 on W2K. My memory is set at 40% with no history cache and I have the pics turned off on the layers palette. Just trying to understand why it is growing even after a prefs reset. I did a print screen of a clients site and brought that into pshop to make a psd and since then the temp file has doubled. That is why I reset the prefs thinking somehow this file was still in the clipboard cache but the reset did not help the temp file size. The temp file is on a seperate hard drive for the primary and the secondary is on the E drive.
View 3 Replies View RelatedHow to convert a drawing (.dwg) file to .svg?
View 4 Replies View RelatedI have a problem with the Temp File folder. I know that photoshop cs4 uses a lot of scratch disk space and I have about 250 gbs of free space on the hard drive. I am working with very large files that exceed 4GBs at times and the free space on the hard drive is alway diminishing. Should i delete the temp files or is there a way to set how much data gets stored in the folder? Another question is, should i assign other drives for scratch disk space? i have 3 other hard drives but they are not as fast as the system hd. and if you have tips on tuning the computer for better performance would be greatly appreciated. The set up is among the following lines:ASUS motherboardIntel quad core 2.33 ghzand 32gb of RAMNvidia 9800gt
View 3 Replies View Relatedwhen i bind the xref's the file size is increasing up to 50mb. the size of the file before binding is 4.5mb. i tried all the options whic ppl given in the discussion here. purged(all regeapps,zero txts etc.),wblock even some lisps. but all in vain. even i tried to audit but it took 2hrs and nothing happened. this dwg containing only lines poly lines, blocks, txts etc. no images and not even dence hatches also. 1500 drawings like this. i have to submit the softcopy soon.
View 8 Replies View RelatedI have a drawing that has a filesize of 10meg even when there are no entities in the drawing.There are about 1000 lietypes in the drawing but it wont let me purge them out.These are what are most likely causing the bloat.Some things I have tried without success...
Erase all then purge 3x and audit then purge 3x then audit. Qselect shows no entities in drawing.Save back to acad 2007 and repeat above
What is the best way to change a large number of file names from Rev A to Rev B? Should I use a program such as Lupas rename or is there a Script or Lisp routine that would work better?
View 2 Replies View RelatedIs it possible to link a vport to another drawing file?
View 5 Replies View RelatedI am trying to plot a drawing and am using a .ctb file that is not a color .ctb file. When I go to plot the plot wants to plot in color. Is there a setting in Options or somewhere that would be causing this?
View 3 Replies View RelatedMy photoshop recently closed with some files open. I supect windows update to be behind that but can't be sure.
I found in the %temp% folder couple files thats look interresting but no way to open them or be sure what it is.
Files are:
- Photoshop Temp21185767124 (36 864 KB) - Photoshop Temp745149862732 (1 164 672 KB)
- Photoshop Temp1555241910196 (885 632 KB)
- Photoshop Temp556628194484 (96 640KB)
... and there're 2 more at 0 KB.
Using:
- Photoshop CS5 12.1 x64
- Windows 7 Service Pack 1
I am working with surveying points and what I used to do was insert the dxf file containing the points to my drawing and they would be inserted with their correct scale. However, now in AutoCAD 2013, when I insert them they are in a different scale and I must adjust them. Is there anyway to have their original scale carry over in 2013?
View 4 Replies View RelatedI want to access the solid opened in AutoCAD from dwg file using C++ and Object ARX.
View 3 Replies View RelatedCan the location of the temp files be changed in Photoshop CS5? NOT scratch disc assignment, that's assigned correctly. I have a storage issue in my recovery folder and there are photoshop temp files clogging that up.
View 13 Replies View RelatedI was always able to send photos from Photoshop 11 via the photo mail and they would arrive fully opened which was great. Now, when I send a photo it arrives not opened and if one clicks on "open" to open it, a notice says it cannot be opened because it is a zip file or a temp. file.
View 3 Replies View RelatedI received a drawing today that doesn't allow me to choose existing ".ctb" files. Opening the "Plot style table (pen assignments)" from the Page Setup dialogue box. I can choose "Start from scratch" , use a "CFG" file, or "Use a PCP or PC2" file". I do not have any CFG files. I usually use PCP in my "Plot" dialogue box for the plotter pull-down menu.
How to use my plot style "BRhalf.ctb" when plotting this drawing. Also, a "heads-up" on background information on this drawing's plot style options, vs. the plot style options on many other drawings I have plotted.
I am currently using Civil 3D 2013, and when I do a qsave, my drawing gives me the following error dialogue box.
"Drawing File is Write Protected" - I am the only on in the files, so now my file is currently Read Only - then I am able to re-open the same file as the same time I have the currently read only version open.
I am getting this currently after or during Plan Production, creating sheets, and I do a qsave.
I am using Civil 3D 2013 Hotfix 1
Windows 7 64 bit system
12GB Ram
Quad Core Xeon 3.2
Server is using Microsoft Server 2008