System is Windows xp pro 32 bit with 3GB ram. Cannot save or even close out photoshop. Need to end task and start over again. Sometimes documant will be recovered sometimes not.
View 14 RepliesWhen trying to use the Photoshop cs6 trial the program stops responding. I have uninstalled a couple of times and nothing changes.
View 8 Replies View RelatedFirst of all, let me say that I am very enthused with the changes in CS4. I feel that this is the best update to PhotoShop that I have seen, and I am a user since version 3.0.
The problem that I see, ocassionally, is that PhotoShop becomes non-responsive for a long period ie: 1-2 minutes. I have experienced this on both my desktop (64 bit Vista Ultimate and 64 bit CS4) and my laptop (32 bit Vista Ultimate). During this time the disk drive is continuously active as though it is swapping the file to disk. The file size, however, is not large enough to cause this and the utilization factor is shown as well below 100%. After a period of time the disk drive stops and CS4 becomes responsive again.
The system is an AMD dual core processor with 6GB RAM on the desktop and 2GB RAM on the laptop. Both systems use SATA hard drives. The CS4 scratch disc is a separate dedicated drive on the desktop. Both systems use Nvidia video and open GL is working fine on both computers. Both computers have the latest Nvidia drivers. Since there are no open GL problems, I assume that the video drivers are okay. As I have said, I see this problem on both my laptop and my desktop.
When my PSE10 stops responding, as it frequently does, it does not pay to wait. Even if it finally responds, I have to shut down my computer before I can access the app and begin work again.
View 1 Replies View RelatedI've been using Adobe Photoshop Elements 11 for a couple of months to create 11x8.5 photo collage's as part of my digital scrapbook. Yesterday, when I tried to create a new collage the program stopped responding and forced me to close it. It will only do this with an 11x8.5, it's not a problem for any other size, unfortunately the rest of my pages are 11x8.5 so I really need to be able to use this size!
View 6 Replies View RelatedI have AutoCAD LT 2011 running on Windows 7 64. I'm using it since long time.
Two weeks ago I started having this problem: as soon as I select any command from the File menu that should open a dialog (Open... Save As... Import...) the program freezes and I see (not responding) in the upper left title bar.
No way to go on. The only solution is to close the program.
Reinstallation from scratch included. System recovery to factory image included. No solution.
Working in photopaint . . . all goes well until I try to save or close the file. Then it stops responding. When I try to close CorelDraw, it says that I cannot close it while I have the photo open in Photopaint. However, Photopaint is no longer running. This is new problem since I installed Patch 3.
View 2 Replies View RelatedI'm running Windows 7 64bit on a relatively high end PC: 2.65 gigahertz Intel Core i7 920, 6 GB ram, NVIDIA GeForce GTX 295 [Display adapter] (2x) in SLI, etc...
So when I attempt to open eps file, it simply hangs, and eventually says NOT RESPONDING. As I type this I've been attempting to open a file for over 30 minutes. I've tried rebooting to no avail.
Since upgrading the server in our office Autocad 2013 is having trouble opening files. When I attempt to open a file the progress bar gets to about 85%, a "not responding" message comes up for about 15-20 seconds, and then the file opens. Two workstations in the office have AutoCAD 2013, one has 8GB RAM and Windows 7 64 bit, the other has 16GB of RAM and also a WIndows 7 64 bit OS. Neither PC had issues opening files before the new server went in, and neither PC is having problems with any other network program. Is there somewhere within the program or in Autocad's registry entries that might still be pointing to the old server? I have tried the following, Firewall has been turned off, VP has been disabled, repair has been run on the program (through programs and features in the control panel). I have email support through Autocad and sent them an email this morning, but have yet to receive a response.
View 9 Replies View RelatedI was using Roto Brush for a while today and everything was working as expected. I Roto Brushed about 20 frames, just doing touchups where necessary. However, after a while, Roto Brush just stopped responding to new strokes. I could not add or remove from the mask. I've tried flushing the RAM and then restarting AE but the problem persists.
I'm using After Effects CC on Windows 7 64-bit with 16GB of RAM.
I made a screen cast to show the problem. You'll see me painting to add and remove from the mask on a couple of frames. Roto Brush looks like it's going to do something but then nothing changes in the mask.URL....
CS5, window 7, 64 bit. Inexplicably, CS5 just stops working with PNG & GIF format files. Bridge says it's missing a/the java plug-in. Huh? Java is up to date at OS level.
View 12 Replies View RelatedSo, I've had CorelDraw X4 for maybe two years now. Everything has always worked fine.
Now, I can't get it to open new documents, and when it says it's "processing" to open old documents.. It doesn't really make any progress, and nothing every opens.
Then it will say that corel is not responding ...
I'm working in Revit 2012. Everytime I save my file it just sits there and thinks. When CTRL-ALT-DEL revit is not responding so I have to end task. The file is not of abnormal size and has been functioning fine until today. I haven't done or made anything in revit out of the ordinary. When I re-open the file I get a "seek failed" message. I open the backup file just fine, but again, cannot save it without it locking up on me again. I have audited and purged. I have copied and saved a new file under a different name.
View 8 Replies View RelatedMy HP had win 7 pro issues and then blew its motherboard so i replaced it. I reloaded Video Studio Pro X3 which worked fine until I tried to save the edited video as a mpeg-4 HD (to be converted into an AVI later). It starts saving and then shut downs informing me to contact Corel and give them the data dump to figure out what the problem is. of course, i can not contact Corel who directed me to this forum. I did download and install the critical update but the same error occurs.
View 14 Replies View RelatedI have done some photography for a preexisting series.
The existing files are embedded with a unique colour profile, I ideally need to use that profile so that the new photography exactly matches colour wise, as I will be using some elements from the original files.
Is there any way to save the embedded profile, so that I can apply it to any new files that I work on?
Photoshop 13.1.1 x64. Mac Pro 3.33 6-core running OSX 10.6.8, 48Gb RAM. Working on a large-ish .PSD file (650 Mb) and saving to a network drive (a Drobo connected to a server) which is our usual routine and has been for years.
Problem – When I save the document and close it, the saved file (in the correct target location) shows the correct modified time and date stamp but if you open that file up again a lot of work is missing. In this instance, about the last half hours work (since the previous time I saved it). However, if you then go to File > Open Recent and choose the file name, the document opens with all the missing up-to-date work in it.
Clearly, File > Open Recent is opening a temporary document somewhere and not the saved file in the target location.
My concern is why isn't the saved file (with correct modified time and date) up-to-date? Suddenly we are having to double check every PS file we work on and save and that is not practical.
I've never had this issue before, but recently when I create a new document preset and go through the process of saving it, it simply doesn't save (File > New > Preset: Custom > Save Preset > Ok). I've tried reinstalling CS6, removing all other custom things I had (textures, brushes, etc.) but not matter what I do, I cannot for the life of me get custom new document presets to save anymore.
View 1 Replies View RelatedI have 300 photos that are being saved as thumbnails for my online store. I am looking to see if I am able (in automated batch saving) to add "-TN" after the document name, before the extension. It will let me add the dash but not "TN."
An example of how my document name needs to be is "MyFile-TN.gif".
how to prevent someone from saving the doucment as PDF? I don't see any API regarding this. Is it doable or not in illustrator CS5?
View 1 Replies View Related I am working on a 44-page document, opening a pdf in GIMP. I've never done anything like this before yet have taught myself how to work page to page, insert images between the text blocks on each page, resize the images and position them where I want, even in more than one layer. (That in a couple of days, me a novice! HOWEVER, after working hours on my project, thinking I was saving as I went, I discovered after the fact that I was only saving the highlighted page, not the entire document. I lost all my work, twice! Luckily I had only gotten through page 7.
The project requires me to need to see all the pages, sometimes to backtrack to reposition an image in order to achieve a consistent flow. At the end I will save as a pdf, flattening all images. In the interim, I need to be able to get back in, day-to-day, to continue the detailed work.
PS. I'm using Gimp 2.8 on a MacBook 10.6.8. And yes I know to save as .xcf while the work's in progress.
I saved a logo I've completed at work using CS6, and saved it in CS5 format and also as a PDF. However when I open them both (one in illustrator and the other in Adobe Reader) they both have a cloudy, hazy effect over them. The colours aren't bright and crisp like they were when I saved them at work in CS6. I have them saved as RGB as well...at least that's what it showed the document colour mode was when I checked it
View 5 Replies View RelatedWhen I save an Illustrator (CS4 and below) file that has a document title and an author in the File Info tabs only the author field is properly transferred to the metadata of a PDF when using Save As PDF. The title field of the PDF gets the file name ("map_data_2006") and not the document title ("Map of Data in 2006"). How do I keep from re-populating the PDFs with metadata (which increases the file size after a resave) which is already stored in the AI files?
View 2 Replies View RelatedI got problems with pdf files in corel x3. When I want to save a large document pdf, it become a blank document when I open it with Adobe Reader.
View 3 Replies View RelatedThe problem doesn't apply if I create a new document. This is the error code: [URL]
View 3 Replies View RelatedIn Illustrator 6, you have to check "include linked files" every time you save a document. If you don't, the next time you open it, you are looking for the missing link. Is there a way that I can set a default so that it automatically checks it each time?
View 1 Replies View RelatedI'm working on a document in Illustrator, that I want to save as PDF. Need to make some words hyperlinked. Is there any way to do that? Any easy tool as in MS Word, I know not of?
View 2 Replies View RelatedStrangely, every time I click "save" in CS6 it opens up a 'Save As' window, (which shouldn't happen), then I click save witht the existing file name (it then tells me the doc already exists), I click OK, (and then OK to the next popup window) then get the message that "This file cannot be found". I'm forced to click "ok" and the doument isn't saved. I've tried saving it differently in previous versions and it still doesn't work. I recorded a video of this behavior. You can see it here - [URL]
Why would it be trying to find a file? It seems like an error message when trying to Open a doc, not Save a doc. I can't shutdown my station until I get the document to save.
I create a document with multiple artboards whereby every image I place in the document is linked, however the size of the document is still enormous (around 350mb). It's a big document with a lot of clipping masks on images but surely it shouldn't be so big.
View 3 Replies View RelatedI opened a document and it popped up a messages asking if I want to revert to the saved version YES or NO. This is weird because I didn't try to open the document twice. I suspect it is a macro that was causing this problem but I have many so it could take a while to locate the culprit. I also suspect a windows 7 update may have caused an interference with the macro.
View 1 Replies View RelatedI've created a pdf file (with illustrator cs3). when I try to open it on photoshop CS3 I receive this message:
"error opening the portable document file (PDF) document. error code = 0X20030055"
I can open this pdf file outside photoshop.no problem openning other pdf files on photoshop.
I inadvertently saved a document as a jpg and wondered if there is any way I can convert it to a document file that is handled more easily with a file that is other than a photo file?
View 1 Replies View Related