Revit :: Not Responding When Saving File?
Dec 6, 2011
I'm working in Revit 2012. Everytime I save my file it just sits there and thinks. When CTRL-ALT-DEL revit is not responding so I have to end task. The file is not of abnormal size and has been functioning fine until today. I haven't done or made anything in revit out of the ordinary. When I re-open the file I get a "seek failed" message. I open the backup file just fine, but again, cannot save it without it locking up on me again. I have audited and purged. I have copied and saved a new file under a different name.
View 8 Replies
ADVERTISEMENT
Aug 2, 2012
I have a larger Revit file that has linked in models (mutiple buildings - each bldg is its own model)
I need a COMPLETE file for Navisworks...
When I go to Revit, and try to export to NWC file, it starts the export process... about 40 minutes in (YES, 40 mins, it just loads and loads and loads) I will get an error message that "Revit has stopped responding"
This is now the 3rd time today I have tried this with no success. I also tried loading into Navisworks directly (Nav 2013) but will not read the files properly and bring them in together.
I know Revit 2012 is capable of exporting linked models to a single NWC file... however my computer does't seem to like it. I even just sat and read a book and did not internet serach or running any other programs at the time....
I NEED THIS TO WORK
Exporting each individual Revit model to NWC and recompling them in Navisworks IS NOT AN OPTION.
I need to export this large linked Revit file as ONE nwc file.. I know it CAN be done...
My laptop is fairly newer and has like 8gb of ram, so that shouldn't be the problem, is it?
View 3 Replies
View Related
Oct 31, 2012
System is Windows xp pro 32 bit with 3GB ram. Cannot save or even close out photoshop. Need to end task and start over again. Sometimes documant will be recovered sometimes not.
View 14 Replies
View Related
Feb 13, 2012
I have Revit MEP 2012 and created a small guest house in this program. I wanted to add some features using Revit Architecture 2011that are not available in the MEP program. When I tried to bring the files up in the Revit architecture program I get an error message that the drawing was created in a later version of Revit. Is there any way to save the MEP file back to an earlier version of Revit like one could do with Autocad drawings?
View 2 Replies
View Related
Dec 18, 2012
Is it possible that i can save a revit 2013 drawing and open it in revit 2011 file?
View 2 Replies
View Related
Jul 12, 2011
PC I am using Revit Architecture on is
Windows 7 Professional
Intel Core i7 3.4ghz
Ram 16gb
64-bit OS
When rendering a job the program stops responding. The task manager shows the cpu working hard but the memory is not being used at all. Windows reports failure to recover program and the application exits.
View 4 Replies
View Related
Jul 24, 2013
The program works fine until I try to edit the boundary of the topography. As soon as I click "edit boundary", the screen goes black for about an hour, then comes back with about 25% loaded. This cycle repeats until the loading is complete, so it takes me a few hours just to enter edit mode. The file is only 17, 280 KB, and Ive been running 240,000 KB files without an issue whatsoever.
View 3 Replies
View Related
Oct 20, 2011
After i moved a drawing in this file to another place, autocad 2004 suddenly got slower and even not responding any time i tried any command .With other files, it's still ok.I t seems layer 4 has some problem.URL...
View 1 Replies
View Related
Sep 26, 2011
I'm running Windows 7 64bit on a relatively high end PC: 2.65 gigahertz Intel Core i7 920, 6 GB ram, NVIDIA GeForce GTX 295 [Display adapter] (2x) in SLI, etc...
So when I attempt to open eps file, it simply hangs, and eventually says NOT RESPONDING. As I type this I've been attempting to open a file for over 30 minutes. I've tried rebooting to no avail.
View 3 Replies
View Related
Nov 5, 2013
I was working on a file this morning and saved it in .Ai format. This afternoon I came back to work on it again and now it won't open. Illustrator hangs, and then stops responding. Is there a way I can fix this?
View 15 Replies
View Related
Mar 22, 2011
keep getting program not responding message when I try to open a drawing.
View 9 Replies
View Related
May 7, 2013
AutoCAD LT 2012
I had my automatic save set up for every 10 minutes but files were not being saved regularly. I deleted files from the Temp folder thinking it was full and now there are no .sv$ saving at all. How can I make drawings save automatically every 10 minutes?
View 6 Replies
View Related
Feb 14, 2013
How do I save a file as a PDF using revit via Parallels. In my Auto Cad Architecture I have a dwg to PDF file but don' t see it in revit.
View 4 Replies
View Related
Jan 14, 2014
My school has Revit Architecture 2013 and can't upgrade it until this summer. Will I be able to save my file in Revit Architecture 2013 at school and transfer it home to Revit 2013 or 2014? The real question is, will I be able to save back to Revit Architecture 2013 from Revit 2014 or Revit 2013? Are the programs compatible?
View 3 Replies
View Related
Nov 22, 2011
I click on the Massing & Site Tab, then on the Topo surface Icon. The tab automatically switches to the Modify/Edit Surface Tab. Then I place the points and generate the topo surface. Then I try to save this work and get the following popup window"
SAVING IN EDIT MODE: Changes made in this edit mode will not be saved. The project will be saved as it was before you entered this mode. SAVE CANCEL.
View 3 Replies
View Related
Apr 28, 2013
How to save a file as a PDF in Revit Architecture 2014? I have tried going to print and then just save as a PDF, but there is not a PDF option.
View 3 Replies
View Related
Oct 23, 2012
We are running Revit 2012 Suites on iMac w/Parallels w/Windows XP SP3. Office file server is a Lion Server running 10.7.5. While working in Revit we can; save PDF's to server, export DWG/DXF to server, and for a few moments after opening a file we can save a .rvt file to the server. But after more than ~2min, Revit freezes at any save attempt and we have to force quit through the task manager.
Last few lines of journal entry for event reads as follows.
[ Jrn.Directive "DocSymbol" _
, "[Res.TemplateLionTest.rvt]"
' 0.000008 2:<<<BackupFileManager:reUnlockPreCommit
' 0.003275 3:<<<relinquishAllLocks
' 0.003386 2:<<m_oSaveToTempFile->preCommit
' 2:< Error encountered renaming main file to backup. Error message: Access to P:ProjectsXXXXX ProjectCADRevitRes.TemplateLionTest.rvt was denied. ]
then repeats the '2:< Error... line for a few pages..
this error has persisted throught Revit 2011 and 2012 versions.
View 3 Replies
View Related
Oct 25, 2013
Whenever we sync or save our Revit files a dialog appears in the center of the drawing window. The dialog is titles Family and shows the Type selector pulldown.
It won't dock, and if you move it it moves back. This is occurring on all versions of Revit 2012, 2013, 2014. I have seem other users as well with the same issue.
View 2 Replies
View Related
Dec 6, 2011
Is there a way to automate repetitive actions such as file size and file saving to the same folder?
View 4 Replies
View Related
Jun 18, 2013
am having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies
View Related
Oct 18, 2013
Background info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
View 2 Replies
View Related
Dec 5, 2012
Open an .AI file saved on a netapp or windows shared directory with full permissions (prior to saving I noted that all security groups are intact in file properties as we have 2 for read and write access)Make any changesTry to save and get the prompt: Can’t save preview, but all other information was saved successfully. The file couldn’t be found. ID = -43 (file is now corrupted and looking in security group file properties the 2 security groups designated for read and write access for the directory is now gone and shows an unknown security group????)
Save as works without a problem. Try to press save again and get This file has been modified outside Illustrator. Do you want to continue?Continue and prompted This file cannot be foundObviously the file preview icon goes from a thumbnail of the file to a generic iconWhen I try to open the file I get: Can’t open the illustration. The file is locked or in use.It led me to believe the issue was either OS X or CS5.5. I was able to open the file fine on Windows Illustrator CS5.5 make a slight change and resaved (which fixed the file and opens again in OS X and read/write security groups show up again?)Optionally, I was also able to fix the file to where I could open it in OS X by simply giving myself Read/Write access to the file from Get Info
Notes:No issues with the same file in 10.7.x.
I've tested on all available Mac Pro / MacBook Pro machines and issue doesn't seem to happen on MacBook Pro retina?Photoshop and InDesign not affected
View 1 Replies
View Related
Dec 6, 2012
I'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
View 3 Replies
View Related
May 24, 2012
When I bring up n image file from a folder and after I work on it I would like to save in another folder other than from the original download file which is the only choice I seem to get.
Is there way to designate a "default" folder for saving other than having to continually search for the folder I wish to save to?
View 6 Replies
View Related
Feb 28, 2012
I saved a symbols file with a few symbols in it.
I then create new .ai files - create some graphics then want to save some of them in the symbols file.
I dont see a way of saving symbols from the .ai file into the already existing symbols file.
View 9 Replies
View Related
Mar 14, 2013
I'm running Revit Architecture 2012. I did a render and it looks fine in the default {3D} View. I selected to save it to the project and when I go to the renderings view to recall it, the color balance is all shifted off way way to the blue end. I tried going back over to render dialog and adjusting the white point all the way up, and it had the expected effect in the {3D} View (shifting everything to overblown orange), but nothing changed at all in the renderings View when I tried to resave it after making the adjustment.
View 3 Replies
View Related
Oct 22, 2013
Using Photoshop CS5 -- I saved a Photoshop file I created as a .pdf file but some of the areas on the .pdf file (specifically, sections of text) do not have any of the color/fill information, they are just white (blank areas). I've seen this before when converting other Photoshop files and could not find a work around. I tried saving with various compression levels (max, high, med) and it makes no difference.
View 12 Replies
View Related
Mar 7, 2011
I have trouble with file size, example I design a poster say 120mb and open existing poster 200mb so that i can copy certain images and text from it and even though I delete the second poster before the saving the new poster but the file size becomes 320mb?
So I thought there was something worng with my machine i.e a virus.
I repeated the example above and removed all the images and all background and left the text on the poster and save the final poster with text only but the file size is same i.e. 320mb?
View 4 Replies
View Related
Mar 10, 2013
I see that keyboard shortcuts in revit 2013 can be eported as xml and imported back from an xml? Is it possible to export the shorcut list as a simple txt file or excel file, for printing purpose. Some of the bim modellers in my office would like to print the shorcut and stick it on their desk.
View 2 Replies
View Related
Jan 16, 2014
I added a FILE PATH label on my titleblock but when I load it to my project file it does not show. Why it does not show, I added a new lable for CLIENT NAME it showed fine. Just to test it out I changed the lable of the second one to FILE PATH and the first one that I did to CLIENT NAME. When I loaded it to my project, the second label dissappeared and the first lable now shows.
View 1 Replies
View Related
Feb 2, 2013
Im working in a graphic design class that uses cs5.5 and I just bought cs6. How to save a Photoshop file down to cs5.5 format so my teachers can grade it.
View 1 Replies
View Related
