My boss wants me to look into using annotative text and dimensions for all our drawings. Currently, we have 15 different text and dimension styles depending on what scale we're using.
However, despite my extensive knowledge in most areas of AutoCAD, I have absolutely NO knowledge of how to use it.
I created all of my annotative dimensions in the wrong scale and now in layout view they are too small and can't be seen. Model space was set to 3/4" = 1'. Once I got to Layout View, I realized I did not have enough space so I needed to size down to 1/2" = 1'. How do you go about changing existing annotative dimensions to another scale? I am using 2010.
View 9 Replies View RelatedI've completed my drawing (Autocad architectural 2012) and set-up my multiple view-ports (at 1:50 and 1:5 scale) on my title-block.
I'm now going to add my text and dimensions im model space....and that's when the problems start!
I've created text and dimensions in annotative style.
The issue I have is when I change annotation scale from 1:50 to 1:5 my text and dimensions in model space automatically changes (as can be seen on attachment) to a huge scale but is perfect in layout view for differing scales.
I frequently use tolerance and fits when modelling and retreive them to use them in drawings. The text on these dimensions is always horizontal . Any time I have vertical dimension on drawings (e.g. several diameters in a stepped bore) the horizontal text takes up way too much real estate. e.g. 18.0000 g6 (17.999 17.998)
I would like to align the text to the dimension lines (i.e. text vertical in this case) In Properties Rotate is greyed out. Is there a way to keep my retrieved dims and have them aligned with the dim lines in the drawing?
Have been successfully using annotative dimensions for A LONG time, upgraded to 2014 and now all the dimensions have randomly been changing themselves to annotative$0 instead of annotative..Can change them back to annotative using properties but even new dimensions come in as annotative$0.
View 0 Replies View RelatedHow can I get annotative dimensions to appear in viewports with different scales with text etc. at the same size?
View 9 Replies View RelatedIN Autocad 2013, I'm trying to measure an annotative dimension. When I do it, it doesn't show the units along with the measurement.
For instance, it just shows up 24 when in fact I want it to say 24". Or if it was metric I would want the "m" to show up after the 24. How do I get the unit to appear?
Is it possible to get an annotative Dimension to print at one size for an A1 Drawing and at another size for an A3 Drawing.
E.g. I want the text in the dimension to be at 25mm in the A1 Drawing but I want it to appear at 12.5 in the A3 Drawing.
Am having problems with annotative dimensions in Autocad LT 2010. When I click on a dimension it appears in at least 3 different scales, do not have this problem in Autocad LT 2012 on different computer.
View 9 Replies View Relatedhave some questions about annotative objects.
The first, if i have created many annotative dimensions and texts and with the time many scales get attached to these objects during editing ( the scales which i don't use on my layouts anymore but have used on these objects ones) How can I quickly and efficiently delete all the scales that are not in use on my layouts in my viewports for all the annotative objects?
the second question is how can I create annotative tags( dynamic blocks that can be scaled like annotative texts)?
I am using it for producing 2D drawings for some simple prototyping.
I am having trouble with two things - Adding dimensions for when I print the image. At the moment I can add dimensions using the constraint tool but I cant seem to find a way to add concise dimensions specifically for printing.
Also is there a feature or a format that I can make 2d images specifically for printing? Perhaps there is a file format?
I am having a problem when adding dimensions to my drawings.
The problem is when adding either radius dimension or diameter dimension. When adding dimensions to circles the dimension line goes right through the middle of the circle rather than just touching the edge.
I am currently updating company drawings from one template to another. I am using the copy and paste method. What I am noticing is that when I copy the part and the dimension from the original drawing ( all in 3 place dimensioning) to the new template Autocad is changing the dimensions to 4 place dimensions. First question is why is this happening and second question is can it be stopped?
View 4 Replies View RelatedHow can i hide the dimensions on the drawing in autocad 2013....screen is cluttered so hiding the dimensions will keep the screen cleaner.
View 2 Replies View RelatedHow do I show dual dimension in Inventor drawing?
View 5 Replies View RelatedI am new to inventor and from a Solidworks background so parts are similar to me.
I am also new to my workplace and part of my job is to clean up and produce some of our CAD files. We are missing drawings from design documentation and I have decided to start there.
How do am I able to add Dimensions into .idw files other than the Retrieve dimensions function?
In other words how can I add dimensions at will?
For some reason my dimensions are exploded automatically in some of my drawings. (The arrows and lines are not connected) Only certain drawings though-other drawings are perfectly fine. I've tried pasting dimensions into the drawings and that doesn't work!!
View 4 Replies View RelatedI am having trouble when editing dimensions in idw drawings.An example being that i wish to change the dimension text
40 to read "40x45 CHAM." When i right click the dimension and go into text the format text box opens but when try to change what it is inside the chevrons and replace it with my new text then this does not seem to work.
I used the options dialog to make new dimensions associative. However, when I open some older drawings the checkbox is empty. Is this option stored with each drawing? If so, is there a way to change this setting for multiple drawings at once?
View 2 Replies View RelatedDRAWINGS: I need to prepare a plan view of a complex part, which incorporates many different (parallel) heights. In the drawing, all of these faces are parallel to the plane of the drawing itself. There are far to many of them to show their heights using section views. The usual drawing convention in this case is to simply indicate each face on the drawing, and then express its height relative to a reference plane.
Until now, I have been doing this simply by measuring a height from the part, and then indicating it on the drawing by adding leaders and text, which:
1. Is extremely laborious
2. Obviously has no intelligent link to the actual part/drawing
My breadth of knowledge in CAD is not huge, but I know that in Gibbscam, for example, after setting the position of the origin in 3 planes, if I then pass the cursor over any parallel plane in the z direction while pressing alt, I will get the distance of that plane from z=0.
What I want is the possibility in Inventor to select a face in a drawing, which is in the same plane as the drawing, and straight away be given it's height relative to a parallel reference plane. Such a value should then update intelligently on the drawing if I modify that same height on the part.
I already have a code below that will read a bunch of drawing filenames that will go into each drawing, save the drawing, (print the drawing but I have this disabled for now,) close it, then move onto the next one.
What I want to do is add reference brackets around every dimension on each drawing. I have managed to update part list styles before using ilogic but I am not sure if it is possible with dimensions.
question = MessageBox.Show("Are you sure you want to update multiple drawings? If so, make sure all drawings are checked out.", "Batch Drawing Update",MessageBoxButtons.YesNo,MessageBoxIcon.Question)
'set condition based on answer
If question = vbNo
Exit Sub
End If
[Code] ......
how to make annotative text also hlep me with some file i don't know how to use this command what is function.
View 1 Replies View RelatedHow do I put dimensions onto working drawings, making them ready for printing?
View 4 Replies View RelatedI do not use annotative text very often, for the first time, I need 1/4 inch and 3/4 inch viewports in the same drawing. How do I setup the dims and text to appear correctly in both viewports?
View 7 Replies View RelatedI have a sample piece of annotative text that I dragged and dropped onto my tool palette. It works perfectly fine in the file I dragged and dropped from, but not in any other file. When I insert in into another file, the text is no longer annotative. I gave the text style a unique name in the file I dragged and dropped from.
View 2 Replies View RelatedI seem to be having an issue with some mtext with a a particular annotation scale set.
Every time i open this .dwg all my 1:5000 mtext paper defined widths are shrinking. I can honestly say i am not doing anything as it just open this way! But all my other annotative text scale are fine?
I am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies View RelatedHow do I make annotative tags, callouts, and blocks non-annotative. AutoCad will not let me change them in the properties tab.
View 1 Replies View RelatedI have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
Is there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
View 2 Replies View RelatedI know it is a simple thing but for the life of me I cannot make it work. I must of hit a button and messed it up.
Annotative dims and text. I have multiple view ports ranging from 1/8 to 1-1/2 inch scale in one paper space. I have noted items (in model) and need them to appear in the different scaled VP's. However, too much is showing up. All scales in all vp's are active, not just the scale of the vp.