I seem to be having an issue with some mtext with a a particular annotation scale set.
Every time i open this .dwg all my 1:5000 mtext paper defined widths are shrinking. I can honestly say i am not doing anything as it just open this way! But all my other annotative text scale are fine?
After closing and re-opening my drawing, my annotative mtext is moving, and shrinking. When I click on the text, the properties say annotative is set to NO. I reset it to YES and fix it, but once I close it and re-open its screwed up again, and annotation is set back to NO.
View 4 Replies View Relatedhow to make annotative text also hlep me with some file i don't know how to use this command what is function.
View 1 Replies View RelatedI do not use annotative text very often, for the first time, I need 1/4 inch and 3/4 inch viewports in the same drawing. How do I setup the dims and text to appear correctly in both viewports?
View 7 Replies View RelatedI have a sample piece of annotative text that I dragged and dropped onto my tool palette. It works perfectly fine in the file I dragged and dropped from, but not in any other file. When I insert in into another file, the text is no longer annotative. I gave the text style a unique name in the file I dragged and dropped from.
View 2 Replies View RelatedI am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies View RelatedHow do I make annotative tags, callouts, and blocks non-annotative. AutoCad will not let me change them in the properties tab.
View 1 Replies View RelatedI have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
Is there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
View 2 Replies View RelatedI know it is a simple thing but for the life of me I cannot make it work. I must of hit a button and messed it up.
Annotative dims and text. I have multiple view ports ranging from 1/8 to 1-1/2 inch scale in one paper space. I have noted items (in model) and need them to appear in the different scaled VP's. However, too much is showing up. All scales in all vp's are active, not just the scale of the vp.
When I want to establish a new annotative text style, and I'm in the Text Styles dialog box, in the "Size" box, why will it not let me enter a Paper Text Height of 3/32"??? Every time I try it defaults to either 1/16" or 1/8". I have checked the Annotative box.
View 2 Replies View RelatedI am really confused on an Annotative Text style issue. I have a blank drawing and i need to set up an annotative text, dimension and multileader style. So i started with the Text Style.
Now i would like the annotative text size to be 2mm, Arial standard. However whenever i try to do this, it changes my 2mm to 3mm which is not what i am after.
Is there some limitation to the font or is this AutoCAD error or am i just trying to do something odd.
I am using the copy and paste clipboard option to bring text into my drawing. The text was annotative at one scale and brought into a new dwg (model space) which had a different annotative scale. When I brought the text in, it came in too small, so I scaled it properly. It did not appear in the paperspace viewport, even thought it was there in model space. I did a properties on the text and it did not allow me to change the texts annotative scale.
View 2 Replies View RelatedI would like to change our office template to have one text style and one dimension style that shows up at 1/8" tall text in any viewport scale. This would also include setting up the multiple global settings. Is this possible?
View 1 Replies View RelatedWhy can I not check the Annotative Scale box for the attribute? Please see attached. The circle scales up and down but I only see the text in the 1/8" scale and but not in the 3/16" scale. The 3/16" scale is selected in the attributes scale box.
View 2 Replies View RelatedI can set up anno text to appear for instance at 1/8" scale, but cannot get it to change for every scale, and for it to remain centered on the original position at each change in scale. I know it's something to do with how I set it up but cannot find it in "Help".
View 1 Replies View RelatedI just called up a drawing I haven't worked on in a while. All the text is annotative with 2 scales, 1/8 & 1/4 and worked just fine. Now I see both scales at once, I can't get "grips" on it, it won't edit, and when I list it, it comes up as object type block "*uxxx", not text. If I explode it, it becomes text again, but as two separate notes of different sizes, and both remain visible, even though the anno scale is set for 1/8. Drawings that reference this also show both scales at once.
View 4 Replies View RelatedAny way to make my Annotative Text to be vertical. I need them for Duct work plans at work and they seem to be locked on horizontal some how.
View 9 Replies View RelatedMy boss wants me to look into using annotative text and dimensions for all our drawings. Currently, we have 15 different text and dimension styles depending on what scale we're using.
However, despite my extensive knowledge in most areas of AutoCAD, I have absolutely NO knowledge of how to use it.
I created all of my annotative dimensions in the wrong scale and now in layout view they are too small and can't be seen. Model space was set to 3/4" = 1'. Once I got to Layout View, I realized I did not have enough space so I needed to size down to 1/2" = 1'. How do you go about changing existing annotative dimensions to another scale? I am using 2010.
View 9 Replies View RelatedI have my annotation scales setup, I can move each scale individually but i cannot rotate individually, ie if I rotate one scale it does the same for rotation for every other scale
how do I get them to rotate individually??
Annotative text does not show up in viewport even if the correct annotative scale is assigned
View 1 Replies View RelatedI have successfully created one drawing using annotative dims and text - I have set my text to 1:1 scale, height = 30 in paperspace (although I don't get what this refers to when it automatically says it's 30 in modelspace too) and my viewport is 1:20 scale. It's all good, the dims and text look great, which is what I want at the end of the day, however I got there.
But, when I want to set up another detail at 1:40 scale, I can't for the life of me figure out how to make the same dim and text style appear the same size as it was for the 1:20 detail.
We have several similar installation in our office, but I am the only one with this problem. All of the annotative text on drawings is unreadable because it is jumbled - in this case Helvetica. We have upgraded clean install from AutoCad 2010 to 2014 - no luck. We reinstalled all of the fonts in both the system and AudtoCad (TrueType and SHX files) - no luck. Changing size or scale - no luck. I have not seen this specific issue before and don't have font issues in any other program.
See attached image - typical of all text on drawing, even within blocks.
jumble.jpg
I had started placing dimensions in a drawing before I realized that I had to change the scale of the entire drawing.So now I would like to change the annotative scale of an existing dimension style but I am not clear on how to do it.
This would be for any new dimensions that I add.They continue to appear at the old scale. All of the dimensions are correct I would just like to see the dimensioning scaled up to the proper size for the drawing.
I realize that I could just create a new style but instead would really like to know how to change what I am already using.
I'm having a problem with some annotative text. The text is set to "match orientation". which is fine, except the text rotates on the grip tab on the lower left of the text instead of the insertion point.
This is how it should look with the two bits of text above each other, except matching orientation:
MODEL.jpg
This is how it does look:
VPORT.jpg
the lot number is justified to the bottom center, and the area to the top center, so in theory, they should show correctly at any orientation.
I am trying to learn Annotative text using multiple viewports. My question: I have text in Model space with Annotative scales to match two different viewports in layout space. Sometimes the text or dimensions for that matter appears in a different place in the two windows. What gives?
View 7 Replies View RelatedI have a drawing that contains texts that are annotative. But I would like to change the scale of the drawing with the floating model space viewport in Paper Space. I know I can individually right click on the text and Add Current Scale to them but is there a way to do so globally?
View 1 Replies View RelatedI have a base plan. The text scale is set to 1"=40' I xref the base plan into a strucural bridge plan sheet and scale the base map x 12 so that i can work in architetural scale. How do I get the text to scale correctly in the xref'd base map that has been scaled by 12 for a 1/8" scale?
View 3 Replies View RelatedI am a beginner in autocad. What is the difference between annotative and associative text?
View 1 Replies View RelatedIm pretty new to annotative text. I was wondering how I can make text show in two viewports at two diffrent scales? Also how to I remove scales from text?
View 2 Replies View Related
