AutoCad :: Jumbled Annotative Text Fonts

Sep 26, 2013

We have several similar installation in our office, but I am the only one with this problem. All of the annotative text on drawings is unreadable because it is jumbled - in this case Helvetica. We have upgraded clean install from AutoCad 2010 to 2014 - no luck. We reinstalled all of the fonts in both the system and AudtoCad (TrueType and SHX files) - no luck. Changing size or scale - no luck. I have not seen this specific issue before and don't have font issues in any other program.

See attached image - typical of all text on drawing, even within blocks.

jumble.jpg

View 5 Replies


ADVERTISEMENT

AutoCAD Print / Plot :: Arabic Fonts Jumbled After Plot

Feb 21, 2011

Arabic Fonts Jumbled in Autocad. When i see in autocad it look very clear, when i see preview also, it is very clear.When i plot drawing, it is coming Fonts Jumbled.

View 5 Replies View Related

CorelDRAW X4 :: Edit Circular Text Without It Getting Jumbled Up?

Aug 5, 2013

I have 36 different circular names that I need to input into a document, but every time I try to edit the field on a circular path, the letters get all jumbled... What can I do to keep the letters on the path when I edit them?

View 14 Replies View Related

CorelDRAW X5 :: Pasting Text - Letters Come A Bit Jumbled Up

May 31, 2013

i'm making a newsletter in which there are pages which has to written in malayalam. i use charmap (Start>Run>Charmap). in that i make a sentence by selecting each letters.. Charmap has its own text field where the written text is displayed. from that text field i've to copy paste it to corel draw's text field.

Now the problem is whenever i paste it on corel draw's text field, the letters come a bit jumbled up. i've noticed that the vowels get jumbled up. but when i paste it on ms word, it comes as it is. 

View 1 Replies View Related

Revit :: 2012 - Text Is All Jumbled Up In Status Bar

Jul 16, 2012

Student had installed 2012 version and the text is all jumbled up in the status bar.  He has been using the program though.  On occasion, says he also sees it affecting option bar.  See attached.

View 5 Replies View Related

AutoCad :: How To Make Text Annotative Text

Dec 5, 2013

how to make annotative text also hlep me with some file i don't know how to use this command what is function.

View 1 Replies View Related

AutoCAD 2010 :: Don't Use Annotative Text Very Often

Apr 24, 2013

I do not use annotative text very often, for the first time, I need 1/4 inch and 3/4 inch viewports in the same drawing.  How do I setup the dims and text to appear correctly in both viewports?

View 7 Replies View Related

AutoCad 2D :: Annotative Text To Palette

Sep 15, 2011

I have a sample piece of annotative text that I dragged and dropped onto my tool palette. It works perfectly fine in the file I dragged and dropped from, but not in any other file. When I insert in into another file, the text is no longer annotative. I gave the text style a unique name in the file I dragged and dropped from.

View 2 Replies View Related

AutoCad 2D :: Shrinking Annotative Text

Jul 13, 2012

I seem to be having an issue with some mtext with a a particular annotation scale set.

Every time i open this .dwg all my 1:5000 mtext paper defined widths are shrinking. I can honestly say i am not doing anything as it just open this way! But all my other annotative text scale are fine?

View 2 Replies View Related

AutoCAD Architecture :: Annotative Objects Inheriting Every Annotative Scale?

Sep 19, 2012

I am running Autocad arch 2011 (as Autocad 2011)  and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object.  Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..

View 2 Replies View Related

AutoCAD 2013 :: Make Annotative Blocks Non-annotative

Jan 3, 2013

How do I make annotative tags, callouts, and blocks non-annotative.  AutoCad will not let me change them in the properties tab.

View 1 Replies View Related

AutoCAD 2010 :: Annotative Attributes In NON-Annotative Block

Feb 7, 2013

I have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.

Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.

Are we missing something, or is this just not possible?

View 1 Replies View Related

AutoCAD LT :: Getting Annotative Block Into Drawing At Annotative Scale?

May 29, 2012

Is there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?

View 2 Replies View Related

AutoCAD Architecture :: Annotative Dims And Text

Aug 16, 2012

I know it is a simple thing but for the life of me I cannot make it work. I must of hit a button and messed it up.

Annotative dims and text. I have multiple view ports ranging from 1/8 to 1-1/2 inch scale in one paper space. I have noted items (in model) and need them to appear in the different scaled VP's. However, too much is showing up. All scales in all vp's are active, not just the scale of the vp.

View 5 Replies View Related

AutoCAD Architecture :: New Annotative Text Styles?

Mar 12, 2012

When I want to establish a new annotative text style, and I'm in the Text Styles dialog box, in the "Size" box, why will it not let me enter a Paper Text Height of 3/32"???  Every time I try it defaults to either 1/16" or 1/8".  I have checked the Annotative box.  

View 2 Replies View Related

AutoCAD 2010 :: Annotative Text Style

May 23, 2011

I am really confused on an Annotative Text style issue. I have a blank drawing and i need to set up an annotative text, dimension and multileader style. So i started with the Text Style.

Now i would like the annotative text size to be 2mm, Arial standard. However whenever i try to do this, it changes my 2mm to 3mm which is not what i am after.

Is there some limitation to the font or is this AutoCAD error or am i just trying to do something odd.

View 6 Replies View Related

AutoCAD 2010 :: Pasting Annotative Text?

Apr 19, 2013

I am using the copy and paste clipboard option to bring text into my drawing.  The text was annotative at one scale and brought into a new dwg (model space) which had a different annotative scale.  When I brought the text in, it came in too small, so I scaled it properly.  It did not appear in the paperspace viewport, even thought it was there in model space.  I did a properties on the text and it did not allow me to change the texts annotative scale. 

View 2 Replies View Related

AutoCAD 2013 :: Annotative Scales And Text

Oct 11, 2012

I would like to change our office template to have one text style and one dimension style that shows up at 1/8" tall text in any viewport scale.  This would also include setting up the multiple global settings.  Is this possible?  

View 1 Replies View Related

AutoCAD Architecture :: Annotative Text In Block

Aug 23, 2013

Why can I not check the Annotative Scale box for the attribute? Please see attached. The circle scales up and down but I only see the text in the 1/8" scale and but not in the 3/16" scale. The 3/16" scale is selected in the attributes scale box.

View 2 Replies View Related

AutoCAD Architecture :: Setting Up Annotative Text?

May 16, 2012

I can set up anno text to appear for instance at 1/8" scale, but cannot get it to change for every scale, and for it to remain centered on the original position at each change in scale. I know it's something to do with how I set it up but cannot find it in "Help".

View 1 Replies View Related

AutoCad 2D :: Annotative Text Turned To Blocks

Sep 22, 2011

I just called up a drawing I haven't worked on in a while. All the text is annotative with 2 scales, 1/8 & 1/4 and worked just fine. Now I see both scales at once, I can't get "grips" on it, it won't edit, and when I list it, it comes up as object type block "*uxxx", not text. If I explode it, it becomes text again, but as two separate notes of different sizes, and both remain visible, even though the anno scale is set for 1/8. Drawings that reference this also show both scales at once.

View 4 Replies View Related

AutoCad 2D :: Making Annotative Text Vertical

Aug 5, 2011

Any way to make my Annotative Text to be vertical. I need them for Duct work plans at work and they seem to be locked on horizontal some how.

View 9 Replies View Related

AutoCad :: Annotative Text And Dimensions For All Drawings

Nov 3, 2011

My boss wants me to look into using annotative text and dimensions for all our drawings. Currently, we have 15 different text and dimension styles depending on what scale we're using.

However, despite my extensive knowledge in most areas of AutoCAD, I have absolutely NO knowledge of how to use it.

View 9 Replies View Related

AutoCad :: Update Annotative Text Within Dimensions?

Jan 4, 2012

I created all of my annotative dimensions in the wrong scale and now in layout view they are too small and can't be seen. Model space was set to 3/4" = 1'. Once I got to Layout View, I realized I did not have enough space so I needed to size down to 1/2" = 1'. How do you go about changing existing annotative dimensions to another scale? I am using 2010.

View 9 Replies View Related

AutoCad 2D :: Annotative Text Unique Rotation

Jun 18, 2012

I have my annotation scales setup, I can move each scale individually but i cannot rotate individually, ie if I rotate one scale it does the same for rotation for every other scale

how do I get them to rotate individually??

View 3 Replies View Related

AutoCad :: Annotative Text Does Not Show Up In Viewport?

Jan 10, 2013

Annotative text does not show up in viewport even if the correct annotative scale is assigned

View 1 Replies View Related

AutoCad :: Viewport Scale And Annotative Text?

Mar 16, 2012

I have successfully created one drawing using annotative dims and text - I have set my text to 1:1 scale, height = 30 in paperspace (although I don't get what this refers to when it automatically says it's 30 in modelspace too) and my viewport is 1:20 scale. It's all good, the dims and text look great, which is what I want at the end of the day, however I got there.

But, when I want to set up another detail at 1:40 scale, I can't for the life of me figure out how to make the same dim and text style appear the same size as it was for the 1:20 detail.

View 9 Replies View Related

AutoCAD 2010 :: Annotative Text Scaling

Jun 11, 2013

I had started placing dimensions in a drawing before I realized that I had to change the scale of the entire drawing.So now I would like to change the annotative scale of an existing dimension style but I am not clear on how to do it.

This would be for any new dimensions that I add.They continue to appear at the old scale. All of the dimensions are correct I would just like to see the dimensioning scaled up to the proper size for the drawing.

I realize that I could just create a new style but instead would really like to know how to change what I am already using.

View 9 Replies View Related

AutoCad 2D :: Annotative Text - Rotate On Grip Tab

Feb 18, 2011

I'm having a problem with some annotative text. The text is set to "match orientation". which is fine, except the text rotates on the grip tab on the lower left of the text instead of the insertion point.

This is how it should look with the two bits of text above each other, except matching orientation:

MODEL.jpg

This is how it does look:

VPORT.jpg

the lot number is justified to the bottom center, and the area to the top center, so in theory, they should show correctly at any orientation.

View 4 Replies View Related

AutoCAD 2013 :: Annotative Text Using Multiple Viewports

Jul 9, 2013

I am trying to learn Annotative text using multiple viewports.  My question: I have text in Model space with Annotative scales to match two different viewports in layout space. Sometimes the text or dimensions for that matter appears in a different place in the two windows. What gives?

View 7 Replies View Related

AutoCAD Civil 3D :: Adding A Scale To Annotative Text

Aug 15, 2013

I have a drawing that contains texts that are annotative. But I would like to change the scale of the drawing with the floating model space viewport in Paper Space. I know I can individually right click on the text and Add Current Scale to them but is there a way to do so globally?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved