AutoCAD 2010 :: Annotative Dimensions / Texts / Tags / Objects
Nov 2, 2012
have some questions about annotative objects.
The first, if i have created many annotative dimensions and texts and with the time many scales get attached to these objects during editing ( the scales which i don't use on my layouts anymore but have used on these objects ones) How can I quickly and efficiently delete all the scales that are not in use on my layouts in my viewports for all the annotative objects?
the second question is how can I create annotative tags( dynamic blocks that can be scaled like annotative texts)?
View 3 Replies
ADVERTISEMENT
Nov 5, 2012
how annotative objects function through xrefs and am running into some trouble.I created a brand new drawing, made an annotative symbol and 2 peices of annotative text, all three have 1"=20' and 1"=40' assigned to them. I can switch my scale back and forth and the objects act as they should.
If creat a second drawing and xref the first one, the only way I can see these xref'd objects is if I set ANNOALLVISIBLE to "1" or if I select one of their xref scales as the current scale 1"=20'_Xref or 1"=40'_Xref.
My goal is to be able to have plans that are annotative that can be xref'd into another annotative drawing and have the objects in both that are the same scale show up.
View 1 Replies
View Related
Oct 30, 2012
After drawing in model space(1:1 Scale) I then dimension as needed using Annotative Dimensions, Multileaders and MText using the same 1:1 scale. But when I create the variuos viewports on my layout pages the dimensions aren't scaling to the viewport scale.
This is where it may be partly my fault; When I first started using annotative dimensions etc. a box would pop up asking what scale to use. Because I am dimensioning in model space, rather than always seeing this text box I selected "Do not ask again" check box to always use 1:1 scaling.
These are some of the other settings in place;
ANNOAUTOSCALE = 4
Annotation Visibility = ON
Automatically Add Scales = ON
View 3 Replies
View Related
May 14, 2012
Seem like when I cut and paste objects from one file to another, particularly objects with different annotative scale, my lexisting ayers would get corrupted. Standard layer names will be appended with "@_96" at the end (i.e. "symbols" to "symbols@_96"l . The 96 would represent the annotative scale factor in the current file. If I exit out and reopen the file, all layer names will return bsck to normal. However if I cont. to work on the file for a long time, the file will get corrupted. when restore, a lot of annotative symbols that where on different "@_96" layers will merge into on new "audit" layer. Sometimes the symbols show up with a different current annotative scale
View 2 Replies
View Related
Sep 19, 2012
I am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies
View Related
Nov 4, 2013
I have attached a AutoCAD Drawing with this message,.
In that drawing, dimensions are in some settings like, ext.line color - red, text color - green,...
But all objects(lines, dimension lines, texts) are displaying in white color only,.
This drawing drawn in old versions (not sure which version)
But properties of the objects are as per settings (see attached picture)
View 2 Replies
View Related
Feb 7, 2013
I have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
View 1 Replies
View Related
Aug 1, 2011
I have completed 4 projects with Arch 10 and this is the first project with this problem. I use Space Generate to create spaces, tag the room with Room Tag, put the room tag where I want it, close the floor plan and when I open the plan back up some of the room tags have moved to a new location. This has happened 3 times now with the same floor plan. Out of the 39 rooms 22 room names have moved their location. Please see attached partial plan.
Why?
View 4 Replies
View Related
May 9, 2013
Have been successfully using annotative dimensions for A LONG time, upgraded to 2014 and now all the dimensions have randomly been changing themselves to annotative$0 instead of annotative..Can change them back to annotative using properties but even new dimensions come in as annotative$0.
View 0 Replies
View Related
Dec 8, 2011
How can I get annotative dimensions to appear in viewports with different scales with text etc. at the same size?
View 9 Replies
View Related
Nov 28, 2012
IN Autocad 2013, I'm trying to measure an annotative dimension. When I do it, it doesn't show the units along with the measurement.
For instance, it just shows up 24 when in fact I want it to say 24". Or if it was metric I would want the "m" to show up after the 24. How do I get the unit to appear?
View 2 Replies
View Related
Sep 19, 2011
Is it possible to get an annotative Dimension to print at one size for an A1 Drawing and at another size for an A3 Drawing.
E.g. I want the text in the dimension to be at 25mm in the A1 Drawing but I want it to appear at 12.5 in the A3 Drawing.
View 1 Replies
View Related
Nov 3, 2011
My boss wants me to look into using annotative text and dimensions for all our drawings. Currently, we have 15 different text and dimension styles depending on what scale we're using.
However, despite my extensive knowledge in most areas of AutoCAD, I have absolutely NO knowledge of how to use it.
View 9 Replies
View Related
Jan 4, 2012
I created all of my annotative dimensions in the wrong scale and now in layout view they are too small and can't be seen. Model space was set to 3/4" = 1'. Once I got to Layout View, I realized I did not have enough space so I needed to size down to 1/2" = 1'. How do you go about changing existing annotative dimensions to another scale? I am using 2010.
View 9 Replies
View Related
May 2, 2012
Am having problems with annotative dimensions in Autocad LT 2010. When I click on a dimension it appears in at least 3 different scales, do not have this problem in Autocad LT 2012 on different computer.
View 9 Replies
View Related
Mar 1, 2012
How to align texts in the AutoCAD?
I’m wondering if there is a way to align texts in the AutoCAD with no work around. For example, in the ArcGIS we can select the texts and force the alignment.
Sure, in the AutoCAD, I can force the text to have the same x-coordinate to align them or other kind of work around, but why we don’t have this as a command like what we have in the ArcGIS?
View 9 Replies
View Related
Feb 15, 2012
Why the texts that have the same "Textstyle" don’t change as the settings of the style change?
For example, suppose that particular texts have the T1 as text style. Then why if we change the value of “paper text height” of the T1 then the texts (that belong to this style) don’t respond?
At the same time, this behavior is valid pertaining the dimension style, i.e, if we change the text height of the dimension style then the dimension text responds and is changed!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
Apr 20, 2013
i'd like to turn single texts into a multiline tex and KEEPING THEIR INDIVIDUAL COLOURS & TEXT SIZES.
View 4 Replies
View Related
Feb 1, 2012
Basically we have a number of different procedures that need to be written in each drawing. Usually we type it out every time which is a pain or copy paste. Is there any way to have 5 or so pre made text blocks to pick which to insert onto different types of drawings but that can be global used across a few systems? We have a small group of workers all on the vault server.
View 4 Replies
View Related
Nov 28, 2012
I've completed my drawing (Autocad architectural 2012) and set-up my multiple view-ports (at 1:50 and 1:5 scale) on my title-block.
I'm now going to add my text and dimensions im model space....and that's when the problems start!
I've created text and dimensions in annotative style.
The issue I have is when I change annotation scale from 1:50 to 1:5 my text and dimensions in model space automatically changes (as can be seen on attachment) to a huge scale but is perfect in layout view for differing scales.
View 9 Replies
View Related
Feb 7, 2012
I just switched over from 2005 to 2012. In 2005 I used Express Tools to change several lines of text to one mtext object. I can't find it in 2012. I didn't realize how much I used it until I lost it.
how to select several lines of text and convert it to one mtext object?
View 3 Replies
View Related
May 16, 2011
I am using CorelDRAW X4. I would like to add the Screen Dots to my texts or objects, but I don't know what to do, so who knows about this?
View 14 Replies
View Related
Apr 12, 2012
Arabic font in the AutoCAD,
I’m wondering why the Arabic fonts text appear correctly on the screen but when the they are printed then they are destroyed! Screenshot below.
Why the Arabic fonts texts fail to appear correctly when they are printed?
View 9 Replies
View Related
Dec 9, 2011
My mtext and multileader styles are created to be "annotative"; however, they didn't have a consistent size through all my different scaled viewports. When I drew them on my model, I added the scales needed, but on the viewports, the only objects consistent in size were the "Drawing Title" from my tool palette and the arrowhead from the multileaders.
When I created these objects, I typed in 0'-0" for the height. But then in the text panel (Annotate tab) I saw there is a drop-down menu with different heights, which seem to override the 0'-0" height.
I ended up drawing these objects on paper space, and they looked fine until I opened the drawing days later (the text was considerably larger).
How can I draw mtext or multileaders on model space, and add scales correctly?
View 2 Replies
View Related
Dec 9, 2010
I am using 2010 and when I am on my sheet or viewing my database through a viewport annotative objects tend to disappear and it happens randomly. It's only a few objects that will disappear while others are shown.
Example: My grid bubbles may disappear, but leaders, text, dimensions, etc are visible.
Another example is door or window tags may disappear while grid, leaders, etc are all shown and when they don't show up they also don't print. Reloading the xref doesn't bring them back also. I have to physically go into the database and make some kind of change (erase a line and than undo; draw a line and than delete it; change a scale, anything); save the drawing and then go to my sheet and reload the xref to get them to come back.
View 9 Replies
View Related
Aug 14, 2008
I have tried to make a dynamic block using annotative objects, text leaders, etc. The block was created initially as annotative but later somehow after going over it in the block editor. It has lost it's annotative properties. Is there a way to make a dynamic block that is not annotative, make it annotative. this block has only visibility features.
View 5 Replies
View Related
Jun 20, 2012
is it possible select all ANNOTATIVE objects in a DWG and to set a Viewport/ANNO scale for all via lisp
View 3 Replies
View Related
Jun 26, 2012
I love annotative scaling of objects it is a great feature. I am however having one problem that I'm not sure if I've missed a setting or something. Is there a way to prevent civil 3d from scaling your annotative objects based on the view scale you are looking at? For example if I zoom out (in model space or max viewport) to show my entire drawing and regen, civil 3d scales all my text and blocks to an enomous scale esentially blocking my entire drawing with solid colour. also if I zoom into a small area to do some detail work all my text becomes microscopic and unuseable. This makes adjusting text so it doesn;t overlap other text very difficult if it never appears at the correct size. Is there a way to freeze annotative objects at thier correct scale (for the current viewport scale) so they dont scale simply because you zoom in or out on a drawing?
View 3 Replies
View Related
Nov 15, 2013
When an object in an XRef is tagged (and the object has an object based PSD) the tag will not update to reflect changes made in the XRef.
This can be fixed in the XRef by running the PropertyDataBrowser command and unticking the Overrides (shown in the leftmost tickbox when two tick boxes present).
Any automatic way to keep the tags up to date? I have attached my VB.Net code attempt for this. It almost works BUT the MultiViewBlock Overrides are ReadOnly.
View 1 Replies
View Related
Apr 24, 2013
I do not use annotative text very often, for the first time, I need 1/4 inch and 3/4 inch viewports in the same drawing. How do I setup the dims and text to appear correctly in both viewports?
View 7 Replies
View Related
Feb 12, 2013
We are currently in the transition to Annotative Annotation (Dims, Text, etc.).
One obstacle that i have not been able to overcome are graphical elements where I need their thickness to adjust to the viewport scale. Graphic elements like (MatchLines, Property Lines, Limit of Work and Set Backs) these all have thickness to display prominently in our drawings.
Currently we are making duplicate copies of these lines and adjusting thier thickness but this defeats the purpose of having annotative lables etc.
I would like an annotative line with a thickness.
Ex. a 12" thick line thru a vport with 1/8" scale will print at 1/8" but the same line thru a vport at 1/16" will print at 1/16".
We would like the the line to maintain it's printed thickness (1/8") no matter the vport scale.
I have tried using the Line Width Display but that just makes a mess...obstructs the dwg when zoomed out, rounds the end of dashes etc.
View 1 Replies
View Related
