I have attached a AutoCAD Drawing with this message,.
In that drawing, dimensions are in some settings like, ext.line color - red, text color - green,...
But all objects(lines, dimension lines, texts) are displaying in white color only,.
This drawing drawn in old versions (not sure which version)
But properties of the objects are as per settings (see attached picture)
have some questions about annotative objects.
The first, if i have created many annotative dimensions and texts and with the time many scales get attached to these objects during editing ( the scales which i don't use on my layouts anymore but have used on these objects ones) How can I quickly and efficiently delete all the scales that are not in use on my layouts in my viewports for all the annotative objects?
the second question is how can I create annotative tags( dynamic blocks that can be scaled like annotative texts)?
When I select any object, my quick properties tab is blank and my properties tab doesn't register anything. Also, I get an error message when I go into my CUI to try to modify the quick properties tab. Pretty frustrating. I've attached a couple of images for reference. I've repaired, re-installed and unistalled and re-installed and still have the same probelm.
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
I have have to use a program to do these hydraulic counts that must be done in decimal feet. So, what I want to be able to do is when I make a dimension that is 12'-8" for example, that it read 12.667.
View 6 Replies View RelatedIt shows the old position of lines after a zoom, or rotate or move, etc. And it shows half of my dimension values.
Also I seem to have some ghost projections of assembly parts when I do the assembly tutorials.
Like holes and wire frames on strange places on my screen.
I have to zoom in and out randomly and wish for it to go away at some point..
I have a problem with Dynamic Input suddenly displaying dimensions in the middle of a line rather than on screen as I work. What I mean is that if I draw a line the length of the line is displayed at the center of the line. When I zoom in to one end of this line the display of the length of the line is no longer displayed on screen but remains at the center of the line. I use AutoCAD 2008.
View 5 Replies View RelatedI am getting a lot of grief xrefing a C3D file into an AutoCAD drawing. A bit of background...
Fairly large development project with 270 new familiy houses. The sanitary sewer (SS) network was created using AutoCAD only. All layout drawings and xrefs were created using AutoCAD using AutoCAD templates. Then, here I am, putting the entire SS network in C3D, with its fancy labels and relevant long sections. Now I am supposed to display this C3D network in all the layout plans and get rid of the old 2D SS xref. Well, the blody thing doesn't work! If I try to xref the original C3D file, it will only display the labels. All pipes and structures and long section do not display. Yes, I checked all layers are turned on.
I tried using data shortcuts instead, bringing first the relevant part liist and styles. No luck. Again neither a single pipe nor structure is diplayed, although the prospector in the toolspace shows the network is referenced in the drawing. I am not sure if this matters, but the C3D source drawing contains a second pipe network referenced using data shortcuts which, by the way, doesn't display either when xrefing. I tried xrefing the C3D file using my C3D template and it works fine. So I guess that, somehow, the AutoCAD template used to creat the drawings is preventing some C3D objects to be displayed when xrefed.
I know I could recreate all our layout plans using my C3D template. Unfortunately, that would be a long process since we have quite a few and they're all heavily xrefed, with many layer properties overriden.
C3D 2011V2. Windows XP 64b
I'm been unable to find what controls the display of the boundary of a section (volume type) object. A section object that does not show it's boundary, when copied to another file shows the boundary.
Same layer states, visual styles, and other setting between both files. There must be some setting I'm overlooking... but a search of the so-called help file was not very informative.
We use ordinate dimensions for all holes in parts. Unfortunately there seems to be features frequently left out of ordinate dimension mode. For instance, by default Inventor uses center and quadrant object snaps. Unlike in normal dimension mode, there is no right click option for disabling quadrant snaps. This is a constant annoyance, especially when dimensioning a print with a lot of holes. Is there any other way or hidden setting to disable the quadrant snap? In addition, add member is missing from the new "marking menu" completely so we have to enable the old right click menu to get it back. Are we the only ones using ordinate dimensions?
Inventor 2013 SP1.1 update 1
I have made a few cabinets (in 3d) on Autocad, but I was just wondering if there is a function that can tell you how large each of the pieces are in each direction (Have originally drawn in 2d and then extruded). Either each piece individually or a group summary.
Even if I go to the properties of each piece, it only gives me the extruded height (i.e. only a value in the Z-direction, gives 0 in the X and Y).
Is there any way to do this apart from the normal linear dimension function?
any method to make two objects with various dimensions on the rooms to become equal, without change the dimensions on the walls only to change roomsACAD.jpg
View 9 Replies View RelatedI have this issue where I have stone right below some framing and other objects. I use a hatch to fill in the square of stone. When I use the hatch, I send it to the back of the drawing order, but it is right below a bunch of my dimensions.
These dimensions become hard to see. I could have sworn that I once saw my hatches leave some extra room around the dimensions. Is there a way to make them easier to see? I guess the ugly solution I have right now is to put small boxes around anything within the hatch to leave some room.
I cannot find my point settings.
View 7 Replies View RelatedWhen opening AutoCAD 2010, I get an error message "Unable to load profile...". This happened unexplicably. I have been using AutoCAD several months with no problems. One annoying consequence is that dialog boxes do not display. For example, running DIMSTYLE does not open the Dimension Style dialog box; instead, a list of options such as ANnotative, Save, and Restore appears. How do I get back to normal?
View 1 Replies View RelatedI have loaded in some cuix files in LT 2010. They have appeared in the customisation area and in the current Workspace and I have turned on the menus I require and no error is returnned, however when I go to the drawing screen none of the customised menus or ribbon tabs have appeared. I have performed an Autocad LT repair and also a reinstall from the add/remove programs and I have also tried a different .CUIX file but still no luck.
View 6 Replies View RelatedI'd like to know how to align an object in model space with the edge of my viewport in paperspace.
When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?
I'm having an issue with some of my drawings where the all the lineweights appear much too thick on the screen. When I plot the drawing or look at a print preview the lineweights appear correct, but in model space they appear much too thick.
I found the option to show / hide lineweights, and when I toggle this option from show to hide it seemingly fixes the issue, but when I pan or zoom on the drawing the think lineweights come back.
Why this is happening, even with show lineweights enabled they should not be displaying this thick as every line on the drawing is default lineweight, and the default is set at 0.25mm, I have the exact settings on different drawings but they dont have this display issue.
my crosshair displays the trails all the time. What can I do to resolve this problem; it's not the mouse setting.
View 2 Replies View RelatedWe currently use AC 2012 Mech.when selecting from the menu content/fasteners/screws and then opening the countersunk head types, many users will see what is dispalyed in the attachment good picture.png... the type of screw is displayed (we can see the text)...while other users selecting the same prompts from the menu will see what is displayed in the attachment bad picture.png... the text is NOT displayed...this occurs for many different types of content, not just the fasterners/screws...
View 2 Replies View RelatedI am displaying dual units in a drawing with primary units being Customary. The metric unit displayed is incorrect.
View 1 Replies View RelatedSomething changed in my settings & I don't know how to chance it back. I can't click on to select objects inside or behind objects. What do I have to change to be able to select any item I click on regardless of where it is?
View 1 Replies View RelatedI would like to display East and West coordinates at certain points ( like circle center lines etc.). how can i do this so that the display is accurate and readable?
View 4 Replies View Related~ I want to purge the color yellow from autocad. ~
Is it possible to override all the colors of an existing *.DWG to a Monochrome Format? I want to be able to open any autocad file and veiw everything in black and white IN MODEL SPACE.
I am not interested in 'changing layer colors' or 'manually changing blocks to the right color.' Right now, I explode the entire drawing (several times depending on how deep something is grouped) and change the color to by layer, but sometimes blocks become contaminated and lose all their data. (In addition, I am not interested in plotting in Monochrome.)
If this task is impossible, is it possible to change the definition of the color "yellow." What I mean by the previous statement is to trick autocad into thinking it is using 'yellow' when it is actually using a different color. Sort of like an induced color blindness.
SUMMARY: I don't want to change a color FROM yellow, I just don't want yellow TO EXIST.
We are using CorelDRAW 15.2.686.0 on our fleet and are noticing that Object Manager has some weird behaviour when you add objects to a page after you copy/paste an object onto a page.
Below shows me adding some rectangles to a page and object manager showing them:
Then when I copy paste an image into the document this object and any subsequent objects are not shown in the Object Manager:
As you see I have more objects than are shown in the Object Manager!
If I go to the Window Menu, then Dockers, then untick the Object Manager box, then once again go back and tick it, then all the objects on my page now show in Object Manager!
many times, when I copy an object with the a dimension to it. It keeps the base point of the dimension and has a crazy long leg of the dimension that starts from the original place. how can I stop this from happening?
View 9 Replies View Relatedhow to write a field that will add or subtract one from the drawing number. I'm adding drawing join line text to drawings so I need the text on the left to read one less than the current drawing & text to the right to read one more.
in drawing 005 text would read "joins drawing 004" & "joins drawing 006"
This is the field for file name (drawing number)
%<AcVar Filename f "%fn7">%
Any way to adjust this to add or subtract one?
I'm using CS5 on Windows. I created a photoshop file using the International Paper settings A4, which is 297 by 210 and 150 pixels per inch.
I've used the whole area around the document but I left around a 5mm margin around the edge of the document. When I come to print the document does not appear to be scaled correctly in the print preview, and then when I come to print on A4 paper measuring exactly 297 x 210 a large part of the image is chopped off at the bottom.
Why Photoshop seems to indicate it is a 297 x 210 file but when it comes to printing it is not scaled correctly?
How can I change the settings, so that only one object will be selected at a time --> selected objects will be deleted from the selection, picking another object without pressing the 'shift' button?
View 7 Replies View RelatedI would like to display the room name and area as text from a spaces i have created. Like a room tag that will automatically update if the space is altered.
I have tried a number of ways but have been successful and the solutions are often overly complicated.
I have since given up and simply entered text and included a field for the space name and another field for the base area however this is quite laborious. surely there is a simpler way of doing this.
I would also like to include occupancy numbers that would also calculate the m2 per person if that is possible?
Suddenly, the multi line text editor in no longer displaying when I select "new" from within the DIMEDIT command. I'm presuming that there is some sort of system variable that controls this, but I have not been able to find it in the help files. The Mtext editor is working from the Mtext command, so I know it's not the DTEXTED variable.
View 6 Replies View RelatedA user showed me today that she cannot see any properties for a wall, door, or other AEC object in the Properties palette.
Some options like height, width, etc. are shown, but not layer, style, etc. from the General portion of the Basic tab.
Is this going to be a reinstall scenario or is there a fix for this?