Photoshop :: CS5 - Printing Correct Dimensions (Paper Settings A4)
May 3, 2012
I'm using CS5 on Windows. I created a photoshop file using the International Paper settings A4, which is 297 by 210 and 150 pixels per inch.
I've used the whole area around the document but I left around a 5mm margin around the edge of the document. When I come to print the document does not appear to be scaled correctly in the print preview, and then when I come to print on A4 paper measuring exactly 297 x 210 a large part of the image is chopped off at the bottom.
Why Photoshop seems to indicate it is a 297 x 210 file but when it comes to printing it is not scaled correctly?
View 5 Replies
ADVERTISEMENT
Aug 3, 2013
When I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies
View Related
May 9, 2008
as some of you who work in TV know, video uses color bars to set up your source material in order to insure that levels in video will be output properly.
please see the above PDF. i created the BG in photoshop, then imported it into indesign for a half-page magazine ad.
this PDF is a high-quality output of PDF. i printed it on my $99 ink jet printer just to see how it looks on paper and it doesn't look too bad.
but is there some way i can test the print output without having to get a printed proof from the print company, that will insure that the ad's colors and levels are set properly?
i guess what i mean is, is there some way that a color bar system similar to TV can be used to compare with the PDF?
View 3 Replies
View Related
Oct 24, 2013
I have a small print shop and have had an issue with the new Photoshop CC not printing images with correct margins on and Epson 9890 and 11880. If I set the image to center on an 8x10 sheet (or any other size). The image comes out skewed to the upper left. between .125 and .25 inches to the left and to the top. I never had this issue with other versions of Photoshop.
View 2 Replies
View Related
Apr 26, 2009
Is there a correct way to size pictures for printing. This is what I have done.My camera is set of 6 meg’s which gives me a huge original. I want to take this and print on a 4x6.I bring up the picture, select print > click on “scale to fit media. This gives me the size of5.333 X 4. I go back to the picture select: Image>Image Size. Under Document size I enter 5.333 in the Width.
View 5 Replies
View Related
Jan 1, 2013
I am sizing illustrator artwork to be specific pixel dimensions (ex: 294 x 76 px). I slice by "making" slice (object/slice/make). I then export by saving for web & devices. When I then preview the artwork I see the file size is 295 x 77px the wrong size by one pixel. all artwork is expanded prior to being sliced so there are no drop-shadows or effects messing with the slices sizing.
View 1 Replies
View Related
Feb 7, 2013
My quest: if your in a different layer working on adding walls for eg. You want add a dimension to that wall. When I hit DLI, How do I make sure that the dim i just entered goes directly to the DIM layer instead of the wall layer.
View 3 Replies
View Related
Mar 16, 2012
IN this drawing, I want the 9.00 to be either 4 ( feet) or 48 (inches).
How do I set the correct scale in this or any drawing?
View 3 Replies
View Related
Jun 13, 2013
Hovering over a row of thumbnails, I swap the full size photo following this code :
var photo = new Image();
photo.src = 'images/'+fileName; // parameter of the function
console.log(fileName+' L= '+photo.width+' H= '+photo.height);
sym.$('toile').attr({
width: photo.width,
height: photo.height,
src: photo.src
});
The full size photo swaps, but retaining the dimensions of the first one (initially on the Edge stage).
Even more puzzling, as you can see in the following screen capture, sometimes I can get the correct photo.width and photo.height (even if it isn't correctly assigned to the 'toile' element), and sometimes those values are zero ! And I feel so lost that this seems random.
May be it has to do with loading delay, asking the width and height information before it is available ? Should I necessarily preload the images ?
View 2 Replies
View Related
Jan 27, 2014
I want to create a rectangle with the correct dimensions for use in a HD video menu. It will be filled with graphic elements as well as text boxes. As referenced in the title it is for a 16x9 aspect ratio. I tried creating a rectangle 16"x9" but that looked too big.
View 4 Replies
View Related
Aug 7, 2012
I create Layout using Inventor, save the file into AUTOCAD DWG format,and then load it to AutoCad. After I open it, the predetermine dimensions (which I select to display the dimension in Inventor) are right. However, the dimension goes wrong if I do a new measurement on the Layout using Autocad. For example, 3 inch distance could be 0.212 in AutoCad (Note I just make up the number, I just want to show the problem is not inch to mm problem), .
I use Autocad 2007 and Inventor 2008
View 1 Replies
View Related
Jan 20, 2006
trying to take my artwork and print my own greeting cards. Is there anyway that I can print on both sides of my paper? Or .. maybe that's possibly in the printer...
View 1 Replies
View Related
May 25, 2011
I'm trying to convert a hand drawn paper plan of our house into Autocad so that I can tweak it. I'm not bad at drawing things in autocad, but how to set it up properly for the file to be printed out in a shop on A0 at the correct scale. Either some info on how to set it up, or a template file that is already setup would be great.
View 9 Replies
View Related
Jul 30, 2013
I am finding that my Lightroom 5 prints are bigger than the settings that I input in the Print module.
View 3 Replies
View Related
Sep 7, 2012
When printing on Epson printers (4800,4880,4900) in the Photoshop print settings dialogue box it won't allow me to print at a custom paper size using the sheet or manual feed settings. The paper feed option defaults to Roll Paper when I create the custom paper size, and then when I change it and try and save the settings it just reverts back to roll paper.
If I try and send a print after this then the printer won't accept it because it's being told to print on a roll instead of sheet. Why is this?? I'm using CS6 and OS 10.7 and I've never experienced this problem with any previous Photoshop/ Mac OS X before.
View 4 Replies
View Related
Feb 16, 2012
I had the need on occasion to dimension in Paper Space. I set up a "Dim Style" to accomplish this in either 1/8" or 1/4" Scale. The problem I am having is the consistency of the actual dimension.
For example: I could draw a simple box 10'x2'. When I dimension in Paper Space, sometimes it correctly displays the dimensions and sometimes it incorrectly displays the dimension.
I attached 2 screen shots of what is happening. Notice the dimension on top of the box shows 10', but when I dimensioned the bottom of the box it shows 480'. This seems to work at random.
The other screen shot shows the Dim Style settings I used.
View 2 Replies
View Related
Jan 26, 2012
When dimensioning in paper space and move or make any adjustment to the viewports the dimensions go haywire and move of the parts but not all dimension and not all viewports are doing this. I'm using the same dimension style and templates that I normally use.
View 2 Replies
View Related
Jan 21, 2012
I added a lot of dimensions to my drawing(in model space) and none of them are visible in paper space. I tried turning the layer off and on, but it still doesn't show them.
View 9 Replies
View Related
Feb 20, 2012
I offen't have head the discussion about where to put the dimensions model or paper space?
I always say the best place to put the dimension is the model space especially when you now have the annotation scale to control it.
View 9 Replies
View Related
Jun 24, 2013
I have been dimensioning my 3-D model in paper space, but my dimensions are wrong and I don't understand why. The height on this drawing attached was drawn as 3'-9" but everytime I try to dimension it in paper space it reads as 3'-3 1/4". And my width should be 2'-6" and it keeps reading as 1'-11 1/4". I have no idea where this came from, and I have double checked my work several times now, it was drawn correctly. And on top of all that, now that I have been messing with it, my dimension no longer changes to oblique the right way, I think I may have changed a setting along the way and made things worse.
View 2 Replies
View Related
Feb 2, 2013
Running Mac os x 10.8.2 and Photoshop CS6. I have an Epson R2880 and so far only used Epson paper. I was able to find all the paper settings but i decided to buy a new German paper.
I downloaded the ICC profile, copied it to /Library/ColorSync/Profiles (and actually any other path that i could find in there). When i open the print dialog i cannot set that paper in either Photoshop or the Epson dialog.
I then removed ALL the ICC files from that path and... surprise. All the profiles are still shown in Photoshop.
View 4 Replies
View Related
Nov 13, 2013
Here's the skinny..... I obviously have chosen to have photoshop control the color management. The closest I have come is to use the printing profile: Japan Color 2002 Newspaper without black point compensation (I think I used Relative Compensation). The only way I can get the yellow to show on the brown is to actually PRINT a brown paper background ON TOP of the brown colored paper.
Obviously, this is causing the brown paper to look quite dark. The yellow is perfect and I've now lost every other color (Navy & 3 shades of Gray). They're all dull against the multi-layered brown. I have tried manipulating the yellow to be more green or more orange and sure enough, they turn out looking green or orange. Should I switch to CMYK instead of RGB? If orange is a variation of brown, why does orange show up on brown so much easier than yellow?
Is there a way to manipulate the newspaper profiles to adjust for browner paper rather than grayer paper?
View 3 Replies
View Related
Apr 22, 2009
I'm getting constant red light flashing from loading thick paper (ultra smooth fine art) fromt he back tray.
View 4 Replies
View Related
Jan 7, 2014
How do I set paper size and quality (e, 10x15, glossy) when printing on Elements 11?
View 1 Replies
View Related
Mar 4, 2013
since I installed PSE 11 my printer only prints a thin line down the paper, instead of the whole photo. How do I fix this?
View 1 Replies
View Related
Mar 9, 2008
I need some help printing in photoshop cs2. I create a 5x7 image at 400 resolution and when i go to print, it does not print as a 5x7 image. When I go to print, i select 5x8 paper so i am not sure what i am doing wrong.
View 11 Replies
View Related
May 10, 2013
I am on ACAD 2012 overlaying dimensions in paperspace to objects in model space..The dimensions keep changing to an incorrect number..Can't identify when it is happening yet. The dimensions are always larger
If I change dim style and back again the correct dimension appears. I can then matchprop to get the other dimensions to appear correctly. But twenty minutes later they are all changed again
I turned of Annotative scale for dimension features and use overall scale of 1.
View 8 Replies
View Related
Jan 31, 2013
I have a dvd box cover insert that I am trying to print 10.531 x 7.25. I set up the page and when I go to print it, it prints too small and doesn't fit in the dvd box property. I've tried printing on letter, legal and 11x17 to no avail it always comes out to 9.75 x 6.25
View 9 Replies
View Related
Jan 4, 2013
When I print in Photoshop CS5 on roll paper, there is a faint grey border that prints all around my image. I haven't created a grey border in my files.
what setting is creating this or what's going on? And how i can stop it?
View 8 Replies
View Related
Aug 24, 2012
I've been trying now for about 3 months to print black onto a 30mm circle on transparency paper to go on an overhead projector, every time i print, it comes out a mucky grey color, there MUST be a way of printing a BLACK black?
View 8 Replies
View Related
Feb 26, 2005
i ran into print shop when they were attempting to duplicate from my photoshop file onto glossy card stock paper.
View 1 Replies
View Related
