I've been trying now for about 3 months to print black onto a 30mm circle on transparency paper to go on an overhead projector, every time i print, it comes out a mucky grey color, there MUST be a way of printing a BLACK black?
View 8 Replies
I have PS CS6 and like to do B & W prints. I print them on my Canon MX870 printer (4 color printer) ... they turn out quite nice. VERY Black & White. Recently, I started doing B & W with a small highlight of color... like a photo of my daughter and her friends with just her red shoes in color.
The Black and White is now not truly B & W... it is slightly tinted ... purplish. I have tried adjusting the levels and contrast but it only changes the tinting to other tints... bluish, redish, etc. I use cmyk 300dpi (typical of what commercial print shops would use). Still no success. Or am I stuck having to send my photos to a printshop for printing?
i noticed that when i try to print anything that has a black in it it comes out looking greyish but when i print the test page from my printer the black comes out looking black.
on the bottom of the design page i see some thing saying
(Document color profiles: RGB: sRGB IEC61966-2.1; CMYK: U.S. Web Coated(SWOP) v2; Grayscale: Dot Gain 20%)
What is the best way to convert a color photo to black and white for commercial printing.
View 9 Replies View RelatedWhen I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies View RelatedIllustrator CS6 (other users on 5)
Mac OS 10.6
I just need to go from K and tones of K to a spot color and tones of a spot color.
I'm using recolor artwork because I can't merge into K. The art comes in from our customers as K so we can't just design differently.
The rectangles on the right are k and tones of k. The rectangles on the left are the results after converting to a spot color with recolor artwork. Using recolor artwork. I just need a way to accurately move the tones from k to a spot.
When 4-color process printing (CMYK), how might one remove the black plate from the process, but maintain the same "shade", or very close to, of all process colors?
Top swatch is the original. Bottom is the closes I could get while keeping Black at 0%.
I have a problem with CorelDraw X6.
When printing 100% black on laser printer the Black is all in raster. Very strange because the same file printed from X4 /same PC and same printer/ is OK and is not in raster.
Probably the problem is somewere in X6.
I don't belive that the problem is in the color management because it's the same as my X5 and there all is OK too.
I want to emulate the effect of this image without having to resort to using a slide-projector, is this something that can be done with software? I know I can just overlay a bunch of graphic light effects, but what about articulating the random curves of shape and form?
View 2 Replies View RelatedUsing Acad LT 2014, Win8. Using stb plot style. I also tried printing from my Win7 laptop, same result. Does not appear to be a Windows8 issue.
I am having something odd happening, I think it is new with 2014.
I noticed that my lines are not actually printing as black, but rather a very dark brown or almost black.
I have a stb style (Bk 1.00), Color = black, screening 100, and for some reason it's not really printing full black.
One layer (A-Elev-Maj) is set for color 132, but the plot style is Bk 1.00. It prints on my Canon Pixma and on pdf as very dark brown.
I have another layer (A-Fill-Bk) set to color 0,0,0, and also plot style Bk 1.00, and it prints dead black.
I tried making the A-Elev-Maj layer 0,0,0 and it still prints an "almost" black.
I checked in the stb file, it is really set to black. I tried 250, as well as 0,0,0 and go the same result.
Attached pdf. You can look at the fence railing or the triangle chimney cap to see the comparison of the A-Fill-Bk which is printing actual black and surronding lines which are "almost" black. Zoom in and you can see it.
trying to take my artwork and print my own greeting cards. Is there anyway that I can print on both sides of my paper? Or .. maybe that's possibly in the printer...
View 1 Replies View RelatedWhen printing on Epson printers (4800,4880,4900) in the Photoshop print settings dialogue box it won't allow me to print at a custom paper size using the sheet or manual feed settings. The paper feed option defaults to Roll Paper when I create the custom paper size, and then when I change it and try and save the settings it just reverts back to roll paper.
If I try and send a print after this then the printer won't accept it because it's being told to print on a roll instead of sheet. Why is this?? I'm using CS6 and OS 10.7 and I've never experienced this problem with any previous Photoshop/ Mac OS X before.
I scanned a black and white print in color and am trying to replace all the black with dark green. Been trying for hours in elements 9. This is all so hard. Just to ask this question I have typed it into 3 different screens, set screenname, many other hurdles.
View 3 Replies View RelatedRunning Mac os x 10.8.2 and Photoshop CS6. I have an Epson R2880 and so far only used Epson paper. I was able to find all the paper settings but i decided to buy a new German paper.
I downloaded the ICC profile, copied it to /Library/ColorSync/Profiles (and actually any other path that i could find in there). When i open the print dialog i cannot set that paper in either Photoshop or the Epson dialog.
I then removed ALL the ICC files from that path and... surprise. All the profiles are still shown in Photoshop.
Here's the skinny..... I obviously have chosen to have photoshop control the color management. The closest I have come is to use the printing profile: Japan Color 2002 Newspaper without black point compensation (I think I used Relative Compensation). The only way I can get the yellow to show on the brown is to actually PRINT a brown paper background ON TOP of the brown colored paper.
Obviously, this is causing the brown paper to look quite dark. The yellow is perfect and I've now lost every other color (Navy & 3 shades of Gray). They're all dull against the multi-layered brown. I have tried manipulating the yellow to be more green or more orange and sure enough, they turn out looking green or orange. Should I switch to CMYK instead of RGB? If orange is a variation of brown, why does orange show up on brown so much easier than yellow?
Is there a way to manipulate the newspaper profiles to adjust for browner paper rather than grayer paper?
I'm using CS5 on Windows. I created a photoshop file using the International Paper settings A4, which is 297 by 210 and 150 pixels per inch.
I've used the whole area around the document but I left around a 5mm margin around the edge of the document. When I come to print the document does not appear to be scaled correctly in the print preview, and then when I come to print on A4 paper measuring exactly 297 x 210 a large part of the image is chopped off at the bottom.
Why Photoshop seems to indicate it is a 297 x 210 file but when it comes to printing it is not scaled correctly?
I'm getting constant red light flashing from loading thick paper (ultra smooth fine art) fromt he back tray.
View 4 Replies View RelatedHow do I set paper size and quality (e, 10x15, glossy) when printing on Elements 11?
View 1 Replies View Relatedsince I installed PSE 11 my printer only prints a thin line down the paper, instead of the whole photo. How do I fix this?
View 1 Replies View RelatedI have a picture that I want to get rid of the overhead light glare. I did take two pictures.
View 2 Replies View RelatedWhen I print in Photoshop CS5 on roll paper, there is a faint grey border that prints all around my image. I haven't created a grey border in my files.
what setting is creating this or what's going on? And how i can stop it?
found some old documents where my deceased father went over some of the words with a black marker so no one can read them. Obviously, she wants to read them. I scanned the papers in but I cannot figure out a way to see if I can remove the marker or lighten it to read the words underneath. Is this even impossible? I can post a snippet of one document if you want.
View 9 Replies View RelatedI've been noticing for a while that my Epson 3880 "keeps printing" after the image has been printed. I loaded some paper that is a little wider than 11x14 (12x14) but I print on it as if it's 11x14. I printed an image (only 8x10 on the page) and now that a wider paper is in the tray I see that a black line is being printed down the side of the page. It's a line that is actually being printed down the entire sheet. When the paper isn't wider than what I've specified the print head just goes past the paper and "thinks" it's printing on the paper.
The printer is an Epson 3880 with current drivers and I'm using the current version of Photoshop CS5.
We need to print a drawing on an A2 paper roll but the drawing is cut off at the length of an A1 or A2 page. How do you set it up so the full length of the roll can be used?
At the moment the roll cuts off at 841mm in length when set to A1. How do you configure it to use more length of the roll so it doesn't cut off the drawing?
I usually process or edit my images for the internet using 72 dpi and using dimensions that fits my liking. I want to process some photos for printing(i.e the paper used for printing family and social photos; I believe you understand what I mean?). please, what dpi or ppi do I use on gimp? Btw,what do photographers call such a paper?
View this message in context:[URL]......
Illy and Photoshop, both of which are making me pull my hair out (much respect for graphic designers). I designed a simple letterhead with a horizontal bar that is supposed to go to the edge of letter size paper but when it actually prints, the bar doesn't extend to the edges. I have a bleed of .125 (1/8") set up so that I can extend this horizontal bar past the document edges so that when it prints, there are no funny edges. I'm printing at home on a non-commercial printer, an HP Color Laser Jet 5500 PCL 6. I've also made sure that the document is not scaled or "fit to page" before printing. And both printing directly from Illustrator and saving as PDF and printing produce the same result. Such a simple thing is driving me nuts.
View 2 Replies View RelatedI am fairly new to PSE and I want to create an oval vignette in Photoshop Elements 10 with transparent background for printing on white paper using MS Publisher. Using the white background on inverse selection makes a slight line impression and either it should have a defined "frame" or nothing.
View 3 Replies View RelatedI reloaded my CAD and now I have a black background in paperspace. This is what I want but I want it to print white while haveing a black backgroud for drawing. How do I do this?
View 3 Replies View RelatedIm trying to print A0 sheets and was just wondering if its possible to change the paper size to 594 x 1682. Pretty much to have 2 A1 sheets in portrait on top of each other.
View 1 Replies View RelatedWhat I’m simply looking for is to print the a sketch in A4 page with a scale of 1/100.
Also, I couldn’t figure out how the print preview works! Sounds to be quite different form what we have in the AutoCAD!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I try to print my work into a pdf so i can print my drawings to paper. But when I try to print it to pdf, it's not there for me to choose. I have adobe on my computer. What i could do to add adobe pdf to one of the chooses when i press the print bottom?
View 1 Replies View Related
