found some old documents where my deceased father went over some of the words with a black marker so no one can read them. Obviously, she wants to read them. I scanned the papers in but I cannot figure out a way to see if I can remove the marker or lighten it to read the words underneath. Is this even impossible? I can post a snippet of one document if you want.
View 9 RepliesThis is a notation to a photograph that my grandfather took. The photo was mounted in one of those old albums that had black paper pages. The notation was written with some kind of white colored pen.
How to get the hand written words to stand out better and be on a pretty much pure black background.
I have played around with simple contrast, brightness, etc. and some other features but not gotten the effect I would like. I might not get it but I would like suggestions on a technique that would do this as automatically as possible. I know I could spend the time to get down to a pixel level and clean up the writing then drop it back on to a new black layer. This would be very time intensive and I would have a big learning curve on how to do this.
Attached Thumbnails
I have some art I did back in high school that I recently scanned in. They are just pen doodles that I did on regular lined notebook paper. But on some of the pages I drew on both sides of the page, so when I scanned one side the ink from the other side bleeds through. I'd like to remove those portions but keeping the original lined paper look.
I tried content-aware fill, healing brush, spot healing brush, and more but nothing seems to work quite right. I seem to have the best luck with the patch tool, but for the parts selected close to ink, the replacement patch gets blue ink blur. It's like Photoshop is trying to guess what should go around those edges but all I want is just the plain selected area CS5?
I have a lot of photos with embossed paper in my family archive. I tried to use:Fast Fourier transform plugin Converting multiple scans to smart-object with median or mean stacking mode Many noise reduction filters (Noise Ninja, etc.)But I did not get the ideal result. How can I remove embossing paper pattern and get good result?
In attach crop of original scan (original-crop.jpg) and mean stack (mean-stack-crop.jpg) from multiple scans.
P.S. What I have: old photos, HP G3110, Digital SLR Olympus E 450, Adobe Photoshop CS6.
Currently working on a PowerPoint styled animation.I've parented the source text of 5 text layers to 1 text layer so I can easily alter the text. It is essential that I have 5 identically texted layers.
My requirement isn't much: To assign colors to individual words without having to separate those words into different layers.
I tried chaning the settings in the Preferences Panel
View 6 Replies View RelatedI used some white rectangles to change the shape of black letters on a white background. Now I want this combination of letters & rectangles to be just letters when I select them etc. (make the white rectangles blend with the background and still have the shape they left on the letters) How can I do that?
View 29 Replies View RelatedI've been trying now for about 3 months to print black onto a 30mm circle on transparency paper to go on an overhead projector, every time i print, it comes out a mucky grey color, there MUST be a way of printing a BLACK black?
View 8 Replies View RelatedI've been noticing for a while that my Epson 3880 "keeps printing" after the image has been printed. I loaded some paper that is a little wider than 11x14 (12x14) but I print on it as if it's 11x14. I printed an image (only 8x10 on the page) and now that a wider paper is in the tray I see that a black line is being printed down the side of the page. It's a line that is actually being printed down the entire sheet. When the paper isn't wider than what I've specified the print head just goes past the paper and "thinks" it's printing on the paper.
The printer is an Epson 3880 with current drivers and I'm using the current version of Photoshop CS5.
I'm having in CS6..I have a text block with a couple of styles in it (headings have one look, body copy has another). Here and there, some words are on bold. When I select some bold words and change the color of them, some other bold words in some other paragraph also change color. Not all bold words... just some. The behavior is unpredictable, so the exact words that get changed will vary, but once it starts to happen it won't stop. When I try to manually fix the other words (hopefully I noticed them before my client!) and change them back to black, sometimes that change reverses the color on the original words too. Sometimes not; it's like the effect is sometimes two-way and sometimes one-way. It becomes a real logic puzzle sometimes, a maddening game where every change affects something else and you can't find the combination of actions that will do the simple thing you want.
I haven't noticed it happening with non-bold text, but that could just be coincidence.
When this happens, the only fix seems to be to rebuild the text from scratch in a new text box. (Copying it all and re-pasting it does not seem to work—unless possibly I paste into a different document entirely.)
I just got CAD2013 but I am use to seeing the DWG in black paper space. I like working with colors. How do I change to black paper space?
I have gone to options and display and chosen black in colors, but It only changes the little square CAD defaults with. Not the entire paper space.
How can I print my drawing on to black paper so all lines are white? Where can I change the color settings etc to do that?
View 9 Replies View RelatedMy work entails regenerating new drawings from aging specification drawings and figures. Very little actual CAD, more hand-tracing JPGs than anything. I'm new to AutoCAD LT and haven't used most of its features. But the one feature I really need right now is to be able to print a black box on a sheet of paper.
As in, a 2-D closed polygon with a solid black fill. Unfortunately, AutoCAD LT doesn't think I should be allowed to print a black box on a sheet of paper.
I've tried assigning the color to the box using properties. I've tried defining layers and moving the box to the "black" layer (funny that "black" isn't a defined color in AutoCAD...that's way cool...). I've tried various settings in the Plotter setup screen.
I have a color plot table selected and I'm trying to print to .PDF. I work strictly out of the model view and do a lot of print previews. What am I, or have I, done, or not done, that I'm supposed to be doing, to print the box?
I have an issue with a file when I plot only. The black 'mask' appears only after plotting. It does not show up in print preview.
There are no frozen layers or switched off through viewports. When I open the viewport on a new paperspace page it follows me in. I can only assume there is an underlying mask in model space or paperspace.
In paper space, some of my drawings lose color palette showing only black and white, some others not. How can I change the settings make all drawings looking unanimous in colors?
View 4 Replies View RelatedHow to do it?
I am using Inv/Vault Pro 2011.
I am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedI'm using version 7, I'm trying to create a curled paper effect then paste an image on the "paper". A couple of web sites suggested creating a rectangle then create a path or something like that and then using the pen tool and the "handles" manipulate the corners. I'm not sure if I have the terminology correct but the problem is that when I create the rectangle and go to add the path (the icon looks like a circle with handles on it) it's grayed out and can not be selected and manually creating a path with the pen tool doesn't work.
View 5 Replies View RelatedQ I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9.
View 3 Replies View RelatedI was given this image from a client which is their outdoor sign with their logo and name. The problem is I'm not sure if there are any easy ways to get the word cut out of the image. I have been selecting each individual letter one at a time. I tried selecting the sign and do an invert but that doesn't seem to work very well, I think it's because its outdoors so there is alot of things going on.
View 10 Replies View Relatedok so im trying to make a background... its pretty basic seeing is how i am new to PS..
Im using cs3 extended and im trying to give my words a black outline, to try to diminish the pixil look... i did it to the few basic pictures in it but cant seem to do it with the words.. can anyone help me out?
ok so i have this gif file i found on the web
its about a minute long animation with words and pictures. how can i edit the words on it?
I need help on how to outline my words in white with a 2px outline ... I don't want the full words to be outlined in white just the top sides and bottom to be outlined in white.. for example look at the Right Guard Xtreme sport deoderant, it's outlined in black but not around the individual words. How can I do but just in white?
View 4 Replies View RelatedI am after some marker pen / felt tip brushes for photoshop. Have browsed the web but not much joy and have checked out deviant art.
View 1 Replies View RelatedWe are scanning 9x9" B/W aerial photos as RGB, 24bit, 600 DPI on an epson 1640XL on a Dell precision workstation (1GB memory, P4 3GHz(i think)). we scan, and save as a JPG, without incident.
when we try to open it, we get the error - "Could not open X.jpg because an unknown or invalid JPEG marker type is found."
I tried reinstalling PS, as well as the twain scan driver. no luck.
we tried scanning on another computer. the fact that we get the same error makes me think it might be the photos themselves, but what could be in an image that would cause this sort of corruption?
it only happens with certain photos, but there doesnt seem to be anything particular about the photos that would make it happen.
Trying to make words go around the edge of a wall...
View 7 Replies View RelatedWhen I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies View RelatedI saved a lot of files in CS3 as a jpeg file with the proper extension. I upgraded to CS5 and now when I want ot open these files i sometimes get a message that " an invalid JPEG marker type is found". I can open hem in preview and in CS3 but not in CS5.
View 1 Replies View RelatedHow to remove hyphens between the words of a file name when I save for web?
View 1 Replies View RelatedI am trying to put words over a transparent background....These words will be placed on a deer hunting video that I am making......Can anyone help me with getting the background transparent? When I try to do it i always get a white background....
View 4 Replies View RelatedHow could I make words in a water ripple appear to ripple as well?
View 4 Replies View Related