I saved a lot of files in CS3 as a jpeg file with the proper extension. I upgraded to CS5 and now when I want ot open these files i sometimes get a message that " an invalid JPEG marker type is found". I can open hem in preview and in CS3 but not in CS5.
View 1 RepliesI have extensive photoshop files of early work and when attempting to open them, a warning, "could not complete because of unknown or invalid jpeg marker types found".How can these be saved or retrieved?
View 1 Replies View Relatedi have write a jpeg file for backup it will be not working it shows jpeg marker too short trunacted.
View 2 Replies View RelatedI have some JPEG images, when I am trying to open these files , I am getting message "Cannot open this file unknown JPEG marker type found".
View 2 Replies View RelatedI have scanned newspaper cuttings, stored them in My Albums. Opened each one in PS 5 increased contrast, edited out specs and marks etc, Saved, then in Slide Show the results were unreadable. Attempted to open again in PS and got the following dialoge box 'JPEG marker segment length is too short. The file may be trunkated or incomplete. Is there a way to recover or do I have to start again and will I get the same result.
View 9 Replies View RelatedJust bought a mac and installed elements 4. When I open an image with finder I receive the following message:
Could not complete your request because an unknown or invalid JPEG marker type is found.
I can't just change the file format to .psd. I need to upload them to a website the requires .jpg format. I can't email them either.
While imaging with my Canon T1i last night with my astro club I took probably 75 or 80 pics. Halfway through the session, my battery low indicator came on, so I changed the battery but may not have turned off the camera....I can't remember.....as I continued to shoot and review the images, everything looked and worked fine. When I returned home and got up this a.m. to review the pics, the last half could not be be opened. I usually insert my SD card in my laptop to review first before I transfer them over. I kept getting this error on the last half of the images I took :" a jpeg marker segment length is too short. The file may be truncated or incomplete." Is there any way to recover and otherwise save these images? By not turning the camera off while changing batteries, could that be the reason for the error message?
View 6 Replies View RelatedI´m trying to open a JPEG image but this time an error occurs.
"Could not complete your request because an unknown or invalid JPEG marker type is found"
Ité the first time it occurs, and occurs only with this JPG file.....This file was extracted for a CD. Bridge does preview the image but I cannot open in any software, as Photoshop.
I have 2 workstations in my suite. Both Win7...both CS5.5 ver. 12.1.x64. My "old" box (Z400) can open the JPEG no problem....My "new" box (Z820) gives me the error.
I have copied the file a few different ways so I know it is not corrupt.
An associate of mine is having difficulty getting his website photos to work. As a graphic arts professional, with fourteen years of experience in Photoshop, I offered to help him. The JPEGs look fine on his laptop, but once transferred to the Web they don't display.
I downloaded several photo and got this error upon opening them in PhotoShop:
"Could not complete your request because a SOFn, DQT, or DHQ marker is missing before a JPEG SOS marker."
I am stymied in my efforts to unravel this error. It looks like this should be something that can be fixed and the files recovered.
A few things I noticed and learned about these photos: the guy who did them made batch thumbnails in Flash. Accompanying these files were a few MPEG files, and the pictures were taken on an older digital camera with a video recording feature. These photos were uploaded with WS_FTP from a Laptop. (I have used WS_FTP without an error from Windows 2000.) The last 4 out of 60 odd photos work fine. They are chronogically listed among the MPEG files. (These last 4 photos could have come from a different camera, but were all uploaded simultaneously).
I am after some marker pen / felt tip brushes for photoshop. Have browsed the web but not much joy and have checked out deviant art.
View 1 Replies View RelatedWe are scanning 9x9" B/W aerial photos as RGB, 24bit, 600 DPI on an epson 1640XL on a Dell precision workstation (1GB memory, P4 3GHz(i think)). we scan, and save as a JPG, without incident.
when we try to open it, we get the error - "Could not open X.jpg because an unknown or invalid JPEG marker type is found."
I tried reinstalling PS, as well as the twain scan driver. no luck.
we tried scanning on another computer. the fact that we get the same error makes me think it might be the photos themselves, but what could be in an image that would cause this sort of corruption?
it only happens with certain photos, but there doesnt seem to be anything particular about the photos that would make it happen.
I need to create an authentic looking Texas historical marker in photoshop with a pre-set text. Basically, I need to take a picture like this and erase the text that is currently there and replace it with some thing else. I would like it to look as real as possible, with my own words in there.
I have PS6, but I am an utter failure with it,
I got this workflow,
1) From LR export to PS
2) Do all essential editings.
3) Save. File become 'xyz.tiff' now. (I want to keep this as master copy)
4) Crop to 4r, Save a Jpeg copy as 'xyz 4r.jpg'
5) PS save it as a copy, but do not automatically open the Jpeg copy. The tiff remains opened. I have to manullay Open, browse to it, and open the Jpeg. The 'Open Recent' list also do not list 'xyz 4r.jpg'.
6) Do 4r sharpening for the 'xyz 4r.jpg', save it.
Basically the files I want to keep and worked on is like this: NEF -> xyz.tiff -> xyz 4r.jpg -> xyz sml.jpg(maybe)
Now, it there a way in step (5) to have PS save the JPEG copy, and automatically open it? I don't care if the Tiff copy remains opened or not, I am done with it.
I got a new computer (Windows 7) at work this April and as of today, when I work on any of my JPEG images in PS CS5,suddenly it has defaulted its "Save As" to JPEG2000. How did this default change and how do I get it to default save as. JPEG again? There was nothing I noticed and no warning as to why this has changed, I didn't touch a thing!
(Last week, Adobe had to work with our IT manager to fix a problem that started occuring with my new Adobe Acrobat Pro 11 program. They had to log into my computer and change a registry thing to get it to work properly again...also something that changed without warning!!)
I'm using a Mac. My windows friend sent me a jpeg of a piece of art we're working on. It looked fine in the web browser. It looked fine in Preview when I opened it, and it looked fine in Photoshop. But when I save it from photoshop after adding just a small thing to the image, the whole thing comes out a bit brighter. I have no idea what's doing it. I've tried Save For Web and Save As and it comes out the same each time. I have played with color settings in the past slightly, but it was my understanding that only affected how photoshop displays the image and I wouldn't expect it to change an image I imported then exported again.
View 4 Replies View RelatedI have the full version of Creative Suite Premium. I uninstalled it from my computer, reformated the hard drive, and reinstalled Windows XP. I went to reinstall CS and it says my serial key is invalid. I have done this in the past and have never had a problem. I also have 5 other computers in the house and same thing on all of them. Yes it is the full version and I purchased it from Adobe. I called Abobe and have since talked to 4 people and a supervisor. None of them can help me becuase my version is not supported anymore. They all want me to upgrade to CS4 and I really dont get anywhere with anyone. I personally do not need the upgrade, I am ok with just using the version I purchased in the past. For the amount of money these programs cost I am suprised the customer support only works for the past 2 versions. So currently CS4 and CS3 are the only supported versions right now. But when CS5 comes out CS3 will no longer be supported. So support has nothing to do with a time frame, its purely based on new versions that are produced. I asked them that if I upgrade to CS4 and it still says serial key invalid, will I be under warranty to get my money back? They stated it is impossible not to work. They said they will just issue a new serial number and then it will work. However, right now they cannot issue me a new serial number for my old version becuase they dont support it. Now I have read about alot of people saying this same exact thing has happend to them, not just the fact that it doesnt work anymore, but the fact that Adobe in no way helps with this matter unless you pay for an upgrade. My opinion now is Adobe makes the codes invalid on purpose after a certain period of time to force you to upgrade. Maybe this is a little far fetched, but what other explanation can their be? Adobe has confirmed wih me on the phone I am in the system and the serial number I have is a valid number. They do not deny that, but I am pretty much at a dead spot here. I either upgrade or cant use the software that was purchased just a few years ago. What I would like people to post is not only ideas of anything else that can be done to resolve this issue, but your opinion to the invalid serial number idea and if this has ever happend to you and if you were forced to upgrade by Adobe...........
View 17 Replies View Relatedfound some old documents where my deceased father went over some of the words with a black marker so no one can read them. Obviously, she wants to read them. I scanned the papers in but I cannot figure out a way to see if I can remove the marker or lighten it to read the words underneath. Is this even impossible? I can post a snippet of one document if you want.
View 9 Replies View RelatedI would like to be able to tag a photo (ie: many photos at one time) with a KEYWORD tag for a place and then be able to find those photos on the map under the PLACES tab.
View 4 Replies View RelatedWe tried to download the software with the serial number, however fail. It prompts the following error message
“Invalid Serial Number” Please re-enter a valid serial number.
I recently had to re-install Windows 7 and then had to re-install Adobe Creative Suite 2. When I try to register my product, which I have used for years, I now get an error message that says my serial number is invalid. How do I register this suite? I can't use it until I get it registered.
View 1 Replies View Relatedi use ps6. if i copy text from any program into a photoshop textbox it says "files empty/invalid" even if i open a new textbox or a new photoshop document. that only happens in photoshop, not in any other program. is there something wrong in the settings?
View 3 Replies View Relatedour user got a error when start Photoshop CS, it show "Could not complete your request because of missing or invalid personlization information"
Does anyone know how to solve this problem?
We have a 5 user license for Photoshop CS4 extended, and the first machine I've tested on has returned a red cross indicating an invalid license key when this is entered. However, the same key has subsequently been accepted for 2 other Windows installs on very similar machines.
This is a full install license as it has successfully installed CS4 alongside CS3 on one of the clients.
I have tried uninstalling all Adobe Photoshop related products including Bridge, etc from the problematic machine (and also ensured the HKLMSofwateMicrosoftWindowsCurrenversionUninstall key is cleared of such products) restarted and attempted install again but it's still not accepted.
I'm suspecting this one workstation has something left over in the registry or perhaps a file/folder that is confusing the key check.
it's said "invalid passeword" when i wrote the 24 digit number written on the pocket disk..... what can i do?
View 1 Replies View RelatedI work with photoshop10 and i got the following message : message format invalid tag id. What can i do to get my photoshop working again?
View 2 Replies View RelatedFor the past three days i have been working on a drawing in photoshop CS6. I was working on it this morning and it went just fine. I save it and when i quite the program a message appeared saying Photoshop has stoped working.
The file was still in the place i saved it, everything seemed ok so i took a brake. A few hours later i tried to open it again and a message apeared saying Photoshop could not open the file because it is not a valid Photoshop file I have tried to open previous .psd files and they worked just fine.
I just upgraded from CS3 to CS4. I could not find my CS3 disk anywhere, so I checked the serial number from within CS3 (Help -> System Info). I tried and tried to use this serialnumber into CS4 but everytime I got an error message something like "invalid serialnumber". It took me several days and hours to find out somewhere in the Internet that the serialnumber has 24 numbers, mine was only 20 numbers. It took me another several days and hours until I finally found my CS3 disk. And voila there were the 24 numbers. It seems that CS3 System Info gives only the 20 first numbers and hides the last 4.What is the point hiding the last four numbers?
View 16 Replies View RelatedI have Elements 11 and just created a photo album, went to print it and it either comes up with:- Tere was an error opening your printer, Printing functions will not be available until you have selected a printer and reopened any document. or if I get the printer ialogue box to open, then press print it comes up with Could not complete your request because the ICC profile is invalid.
I tried removing Elements from my pc and re-installing it incase I had done something to cause the problem, but makes no difference.
In the middle of a photoshop session the application spontaneously quit (when changing colour palette). This is a totally legal copy of CS2, recently successfully transferred to a new-ish Mac running Snow Leopard. When I tried to restart P'shop it came up with an error message "Your Adobe Photoshop user name, organisation, or serial number is missing or invalid. The application cannot continue and must now exit."Subsequent attempts to launch p'shop came up with a supposedly humorous "Space Monkey" splash screen.
View 4 Replies View RelatedWhen I try to open the program, it gives me the following error: "Could not initialize photoshop because the preferences file was invalid (it has been deleted). I've uninstalled and re-installed the program.
View 3 Replies View Related