Photoshop :: JPEG Marker Segment Length Is Too Short

Sep 16, 2012

While imaging with my Canon T1i last night with my astro club I took probably 75 or 80 pics.  Halfway through the session, my battery low indicator came on, so I changed the battery but may not have turned off the camera....I can't remember.....as I continued to shoot and review the images, everything looked and worked fine.   When I returned home and got up this a.m. to review the pics, the last half could not be be opened.   I usually insert my SD card in my laptop to review first before I transfer them over.  I kept getting this error on the last half of the images I took :" a jpeg marker segment length is too short. The file may be truncated or incomplete." Is there any way to recover and otherwise save these images?   By not turning the camera off while changing batteries, could that be the reason for the error message?

View 6 Replies


ADVERTISEMENT

Photoshop :: JPEG Marker Segment Is Too Short?

Sep 26, 2005

I have scanned newspaper cuttings, stored them in My Albums. Opened each one in PS 5 increased contrast, edited out specs and marks etc, Saved, then in Slide Show the results were unreadable. Attempted to open again in PS and got the following dialoge box 'JPEG marker segment length is too short. The file may be trunkated or incomplete. Is there a way to recover or do I have to start again and will I get the same result.

View 9 Replies View Related

Photoshop :: JPEG Marker Segment Length Error - File Not Corrupt

Feb 4, 2013

I have 2 workstations in my suite. Both Win7...both CS5.5 ver. 12.1.x64.  My "old" box (Z400) can open the JPEG no problem....My "new" box (Z820) gives me the error.
 
I have copied the file a few different ways so I know it is not corrupt.

View 3 Replies View Related

Photoshop :: Jpeg Marker Too Short

Nov 2, 2007

i have write a jpeg file for backup it will be not working it shows jpeg marker too short trunacted.

View 2 Replies View Related

AutoCAD Inventor :: Derived Route - Minimum Length Violation (Too Short To Continue)

Jan 25, 2012

When I use  Derived Route I get  "Minimum Length Violation(Too short to continue)". How can I fix it. Is there any parameter that I can define minimum length.

View 7 Replies View Related

Photoshop :: Invalid JPEG Marker

Mar 28, 2012

I saved a lot of files in CS3 as a jpeg file with the proper extension. I upgraded to CS5 and now when I want ot open these files i sometimes get a message that " an invalid JPEG marker type is found". I  can open hem in preview and in CS3 but not in CS5.

View 1 Replies View Related

Photoshop :: Unknown JPEG Marker

Jun 8, 2004

I have some JPEG images, when I am trying to open these files , I am getting message "Cannot open this file unknown JPEG marker type found".

View 2 Replies View Related

Photoshop :: Unknown Or Invaid JPEG Marker

May 23, 2007

Just bought a mac and installed elements 4. When I open an image with finder I receive the following message:

Could not complete your request because an unknown or invalid JPEG marker type is found.

I can't just change the file format to .psd. I need to upload them to a website the requires .jpg format. I can't email them either.

View 1 Replies View Related

Photoshop :: Invalid JPEG Marker Types Found

May 10, 2013

I have extensive photoshop files of early work and when attempting to open them, a warning, "could not complete because of unknown or  invalid jpeg marker types found".How can these be saved or retrieved?

View 1 Replies View Related

AutoCAD Inventor :: Minimum Segment Length Violation In Tube & Pipe Runs?

Jan 2, 2014

I keep getting this minimum segment length message after running tubing routes. I've already configured the tube style and entered the minimum length I want. I place tube fittings before I run tubing, so I don't include fittings/couplings in my tube style. The lengths of the segments are equal to or longer than the segment rule I entered, so I'm not sure why I'm getting this error message. I also get a message saying that a segment will violate the rule once fittings are placed, even though I've opted out of using fittings in the style. To get around this error I've been having to go into each route and edit the sketch to make the problem segments longer.

HP Z400 Workstation
Intel Xeon @ 3.33GHz
12.0 GB RAM
Windows 7 64-bit
Inventor Pro 2014

View 9 Replies View Related

Photoshop :: Error JPEG :: Could Not Complete Your Request Because A SOFn, DQT, Or DHQ Marker Is Missing

Jul 20, 2005

An associate of mine is having difficulty getting his website photos to work. As a graphic arts professional, with fourteen years of experience in Photoshop, I offered to help him. The JPEGs look fine on his laptop, but once transferred to the Web they don't display.

I downloaded several photo and got this error upon opening them in PhotoShop:

"Could not complete your request because a SOFn, DQT, or DHQ marker is missing before a JPEG SOS marker."

I am stymied in my efforts to unravel this error. It looks like this should be something that can be fixed and the files recovered.

A few things I noticed and learned about these photos: the guy who did them made batch thumbnails in Flash. Accompanying these files were a few MPEG files, and the pictures were taken on an older digital camera with a video recording feature. These photos were uploaded with WS_FTP from a Laptop. (I have used WS_FTP without an error from Windows 2000.) The last 4 out of 60 odd photos work fine. They are chronogically listed among the MPEG files. (These last 4 photos could have come from a different camera, but were all uploaded simultaneously).

View 4 Replies View Related

AutoCAD .NET :: Draw Triangle In Segment Of Polyline In Segment Direction

Sep 9, 2012

I want to draw triangle in segment of polyline in segment direction.

I have target segment and center point of it:

  Polyline line = ...
  LineSegment3d centerSegment = line.GetLineSegmentAt(centerSegmentIndex);
  Point3d centerPosition = centerSegment.MidPoint;

I can find direction of this segment:

  Vector3d zaDirection = line.GetLineSegmentAt(centerSegmentIndex).Direction;

Next, I create list of points:

  List<Point3d> points = new List<Point3d>();
  points.Add(centerPosition);
  points.Add(centerPosition.Add(new Vector3d(ZASize, +ZASize, 0)));
  points.Add(centerPosition.Add(new Vector3d(ZASize, -ZASize, 0)));

And draw it:

wd.Geometry.Polygon(new Point3dCollection(points.ToArray()));

Ok, I have triangle but... it's not in segment direction, it's X-direction.

I try to rotate it:

points.Add(centerPosition.Add(new Vector3d(ZASize, +ZASize, 0)).RotateBy(0, zaDirection, centerPosition));

But it's not the same as I want.

How I can draw triangle by serment direction?

View 5 Replies View Related

AutoCAD Civil 3D :: Flow Segment Label Using Total Flow Type Travel Time For Each Segment

Nov 27, 2012

Flow segment label using total Flow Type travel time for each segment:

C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
[URL]....

View 4 Replies View Related

AutoCAD Dynamic Blocks :: Change Length Of Line Based On Length Of Attribute

Jan 8, 2013

Is it possible to change the length of a line based on the length of an attribute?

I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum).  But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).

View 3 Replies View Related

AutoCAD Dynamic Blocks :: Line Length Follow Content Length Of Attribute

Mar 16, 2012

I was wondering if there is a way with DB's to have a line "follow" or "grow" with the content/value length of an attribute. Maybe some method of linking the attribute width to length of the line? Essentially, it would work just like turning on the underline setting when typing in mtext editor (or any program with an underline option for that matter), expect that the line could be placed anywhere, and would not have to reside directly below the text.

View 5 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Change Length To Match Length

May 24, 2002

Command to make a line change length to match length of a line, arc, polyline or circle? Could use this when making flat patterns layouts.

View 5 Replies View Related

AutoCAD Civil 3D :: Changing Lane Width Not Affecting Resulted Values Of Length And Run Off Length

May 11, 2013

With using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )

Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?

View 2 Replies View Related

AutoCad :: Length In Metric Attribute To Automatically Populate Based On Input From Length In Imperial

Jan 24, 2012

I am creating a block with attributes for a standard job. I have (4) total attributes in this block (for example: panel type, qty, length in imperial, length in mertic)

I would like my length in metric attribute to automatically populate based on the input from length in imperial.

Is this possible?

View 1 Replies View Related

Photoshop :: Short Cuts In PS Not Working.

Apr 22, 2004

I just installed PS CS and my short cuts dosent work??? How do i turn them on?

View 1 Replies View Related

Photoshop :: Objects In Photo Too Short/fat

Jul 29, 2009

I'm using Photoshop CS3 in a macbook pro under windows XP. When I opened this photo, the objects look shorter than they did when I first created this composition using the same version/same release of PS CS3 that I'm using now in my old laptop (HP Compaq Presario X6000 running Win XP). How can I fix/eliminate this? Top photo: Dialogue box I get before image loads   Bottom: objects (desk, chairs, characters) look shorter/fatter than they did previously 

View 6 Replies View Related

Photoshop :: Make The Brush Stroke Short

Jan 24, 2013

Im using a tablet. I want to make my brush stoke very very short. Previously, I would do this by setting the fade to a very small number. I think I used to set it to airbrush but possibly it worked in brush as well. (I cant even figure out how to select an airbrush now) How do I do this in 6?

View 3 Replies View Related

Photoshop :: Keyboard Short Cuts -- Cpme And Go

Mar 14, 2009

Why do my keyboard shortcuts work and then all of a sudden, without even closing the program they don't work?

View 1 Replies View Related

Photoshop :: Pan And Zoom Over Still Image To Create Short Video

Mar 9, 2013

I have CS6 extended.
 
I need to pan and zoom over a still image to create a short video. I remember the process was to mark a track over the still, with points along this path that required time to transit and the degree of zoom. On playback, it was like a video.

Think of the still as a hillside shot with a road winding from top to bottom. The video captured a zoomed in frame of just the road. Eventually, at the bottom, the frame slowly zoomed out displaying most of the still. How do I do this?

View 14 Replies View Related

Photoshop :: Zoom Tool Short Cuts Won't Work In CS2

Oct 29, 2008

When I use the keyboard short cuts to to zoom (ctrl ++ and ctrl -) they don't work. Any ideas why?

View 2 Replies View Related

Photoshop :: Short Brush Stroke Lag CS6 In Dual Monitor Setup?

Apr 4, 2013

When I use a brush or any of the clonehealing tools the brush start lagging when I do you short and quick strokes.
 
 Longer and continuous strokes don't have any lagging going on. 
 
I have reinstalled the driver and tried a few different versions as well but the issue persists. I also tried different settings for the Graphics Processor in preferences but no change.
  
I am on an Intuos5 L and before that I had the Intuos 3 A4 and I had the problems with that tablet as well.
 
 I am on i5 iMac Quad-Core 2.5ghz, 32gb ram Radeon HD 6750M 512 MB - Mac OS X 10.7.5
 
 Update:After a few testing I realized this lagging appears to happen only when I am on Dual monitor setup.
 
 My main monitor is an Eizo CG222W I have Photoshop setup whereby all my tools and panels are on my iMac and the main window with the image is on my Eizo.When I only use my Eizo with tools and panels then the lagging disappears.

View 10 Replies View Related

Photoshop :: Short Delay With Brush And Rubber Tool On Windows 7 (CS5 / CS6 And CC)

Nov 5, 2013

I have a problem with PhotoShop CC. I also tested PhotoShop CS5 and PhotoShop CS6, having the same problems (last versions of them). Plugins for PhotoShop are not installed.
 
My System:
 
Windows 7 64 Bit with SP1   (newest updates german version)
Intel Core i7-4770k CPU 3.5 Ghz
RAM:   16 GB DDR3
GPU: GeForce  GTX 760 2048 MB  MSI N760 TF 2GD5/OC
MainBoard: MSI Z87-G45 Gaming
 
Monitor: Asus PB248Q    1920 x 1200   60 Hz   (connected with Display Port)
 
All Drivers (GPU, ChipSet of MainBoard)  are up to date.
 
My Problem is that the Brush or rubber tool is 0,5 to 1 seconds slower than the mouse cursor. The stroke trails behind. But the brush tool still runs smooth and fluently. Its just slower than the mouse. When mouse stops moving, the brush catch up. The brush even trails behind when cursor is moving slow. When cursor is moving faster, sbrush also moves faster, but brush is never as fast as cursor. Only when cursor does not move, brush catch up.
 
This even happens when simple brushes for example simple round brush with 100 hardness and 10 pixel of size are used.When removing Smooting in brush settings, brush tool become much faster, but not as fast as cursor.This behaviour occurs in 64 and 32 Bit Version of PhotoShop.Also, GPU Settings was changed (Basic, Normal, Advanced), but without results. 
 
When Aero-Surface in windows 7 is disabled, brush tool works much faster, but not smooth and fluently anymore.This also happens when I am working with a document containing only one single layer.I also tested all GPU Settings in PhotoShop (Basic, Normal and Advance), still the same problem.
 
PhotoShop uses 60% of my Ram (8793 MB)
 
The strange thing is: When I installed PHotoShop CS5 on my 8 years old computer with Windows XP, Brush tool with same settings was as fast as mouse cursor and it runs really smooth and fluently. The main difference is that my new Computer is using Windows 7, the old one uses Windows XP 32 Bit.
 
Old System:
 
Windows XP 32 Bit
AMd Athlon X2   3700+
2 GB RAM
GeForce 7800 GTX   (connected with DVI to monitor)
 
Can it be that PhotoShop has problems with Aero Surface of Windows 7? Or with Windows 7 64 Bit? 

View 6 Replies View Related

Photoshop :: Marker Pen Brushes..

Jun 17, 2008

I am after some marker pen / felt tip brushes for photoshop. Have browsed the web but not much joy and have checked out deviant art.

View 1 Replies View Related

Photoshop :: PS 7 Jpg Marker Error

Jun 21, 2004

We are scanning 9x9" B/W aerial photos as RGB, 24bit, 600 DPI on an epson 1640XL on a Dell precision workstation (1GB memory, P4 3GHz(i think)). we scan, and save as a JPG, without incident.

when we try to open it, we get the error - "Could not open X.jpg because an unknown or invalid JPEG marker type is found."

I tried reinstalling PS, as well as the twain scan driver. no luck.
we tried scanning on another computer. the fact that we get the same error makes me think it might be the photos themselves, but what could be in an image that would cause this sort of corruption?

it only happens with certain photos, but there doesnt seem to be anything particular about the photos that would make it happen.

View 6 Replies View Related

Photoshop :: Lightroom 4 / Product Code Is Too Short / There Are Missing Two Letters Or Numbers

Nov 2, 2013

my product code is too short. I can't install Photoshop Lightroom 4.

View 5 Replies View Related

Photoshop :: Making A Historical Marker

May 17, 2006

I need to create an authentic looking Texas historical marker in photoshop with a pre-set text. Basically, I need to take a picture like this and erase the text that is currently there and replace it with some thing else. I would like it to look as real as possible, with my own words in there.

I have PS6, but I am an utter failure with it,

View 3 Replies View Related

Photoshop :: How To Save Tiff To JPEG And Automatically Open JPEG Copy

Apr 24, 2013

I got this workflow,

1) From LR export to PS
2) Do all essential editings.
3) Save. File become 'xyz.tiff' now. (I want to keep this as master copy)
4) Crop to 4r, Save a Jpeg copy as 'xyz 4r.jpg'
5) PS save it as a copy, but do not automatically open the Jpeg copy. The tiff remains opened. I have to manullay Open, browse to it, and open the Jpeg. The 'Open Recent' list also do not list 'xyz 4r.jpg'.
6) Do 4r sharpening for the 'xyz 4r.jpg', save it.
 
Basically the files I want to keep and worked on is like this: NEF -> xyz.tiff -> xyz 4r.jpg -> xyz sml.jpg(maybe)
 
Now, it there a way in step (5) to have PS save the JPEG copy, and automatically open it? I don't care if the Tiff copy remains opened or not, I am done with it.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved