I have 2 workstations in my suite. Both Win7...both CS5.5 ver. 12.1.x64. My "old" box (Z400) can open the JPEG no problem....My "new" box (Z820) gives me the error.
I have copied the file a few different ways so I know it is not corrupt.
While imaging with my Canon T1i last night with my astro club I took probably 75 or 80 pics. Halfway through the session, my battery low indicator came on, so I changed the battery but may not have turned off the camera....I can't remember.....as I continued to shoot and review the images, everything looked and worked fine. When I returned home and got up this a.m. to review the pics, the last half could not be be opened. I usually insert my SD card in my laptop to review first before I transfer them over. I kept getting this error on the last half of the images I took :" a jpeg marker segment length is too short. The file may be truncated or incomplete." Is there any way to recover and otherwise save these images? By not turning the camera off while changing batteries, could that be the reason for the error message?
View 6 Replies View RelatedI have scanned newspaper cuttings, stored them in My Albums. Opened each one in PS 5 increased contrast, edited out specs and marks etc, Saved, then in Slide Show the results were unreadable. Attempted to open again in PS and got the following dialoge box 'JPEG marker segment length is too short. The file may be trunkated or incomplete. Is there a way to recover or do I have to start again and will I get the same result.
View 9 Replies View RelatedAn associate of mine is having difficulty getting his website photos to work. As a graphic arts professional, with fourteen years of experience in Photoshop, I offered to help him. The JPEGs look fine on his laptop, but once transferred to the Web they don't display.
I downloaded several photo and got this error upon opening them in PhotoShop:
"Could not complete your request because a SOFn, DQT, or DHQ marker is missing before a JPEG SOS marker."
I am stymied in my efforts to unravel this error. It looks like this should be something that can be fixed and the files recovered.
A few things I noticed and learned about these photos: the guy who did them made batch thumbnails in Flash. Accompanying these files were a few MPEG files, and the pictures were taken on an older digital camera with a video recording feature. These photos were uploaded with WS_FTP from a Laptop. (I have used WS_FTP without an error from Windows 2000.) The last 4 out of 60 odd photos work fine. They are chronogically listed among the MPEG files. (These last 4 photos could have come from a different camera, but were all uploaded simultaneously).
Print to JPEG in LR5.2 produces a corrupt JPEG file that cannot be opened.
Lightroom is running on MacPro. When printing I am attaching an ICC profile provided by the bureau that is going to produce the prtins. Having said this the file cannot be opened neither on a Mac nor on a Windows PC.
Up until now, i used to exported as TIFFs but after reading Jeff Schewe book The Digital Print i have become convinced that printing through LR to a file is much more efficient.
Trying to install Elements 10. Message appears -- ERROR 1335 Cabinet file Data13.cab is corrupt and cannot be used. If ignored ERROR 2350.FDI server error appears and installation stops.
View 1 Replies View RelatedI've recently updated one of my PC's. I tried to launch VS x5 and I received a "corrupt file message" with error code 38. I've read all of the previous threads here and others online referring to Protexis Licensing V2 in the Services tab. I've un-installed, reinstalled several times. Would be nice is a "Repair" option was available. I've entered the serial numbers, several times, made it to the "Register Product" page but can never get the program to start. This was an update from VS 4 and I've entered the serial number for that when prompted. I have the program working just fine on another completely new system. Both are running Windows 7.
View 1 Replies View RelatedI saved a lot of files in CS3 as a jpeg file with the proper extension. I upgraded to CS5 and now when I want ot open these files i sometimes get a message that " an invalid JPEG marker type is found". I can open hem in preview and in CS3 but not in CS5.
View 1 Replies View Relatedi have write a jpeg file for backup it will be not working it shows jpeg marker too short trunacted.
View 2 Replies View RelatedI have some JPEG images, when I am trying to open these files , I am getting message "Cannot open this file unknown JPEG marker type found".
View 2 Replies View RelatedJust bought a mac and installed elements 4. When I open an image with finder I receive the following message:
Could not complete your request because an unknown or invalid JPEG marker type is found.
I can't just change the file format to .psd. I need to upload them to a website the requires .jpg format. I can't email them either.
I recently had to burn a whole bunch of images onto cd, due to a harddrive format I was gonna perform...I burned the files...the cd showed no errors during burning....
not all images but almost all my jpeg files when I try to open them...in any program, I.E., windows preview, photoshop, illustrator, u name it...they won't open and I get this message...
"unknown or invalid JPEG marker type is found"
I never had a problem with the files before...now I got all these pics that I need, they are very important...and I can't open them...the file sizes are the same if that matters....
I have extensive photoshop files of early work and when attempting to open them, a warning, "could not complete because of unknown or invalid jpeg marker types found".How can these be saved or retrieved?
View 1 Replies View RelatedI bought an HP Photosmart 320 and found out too late that there was a bug in the firmware that caused problems when writing to large memory cards. I have fixed the firmware but I have over 100 photos taken before the fix that I would like to salvage. I have found many services that will recover deleted files but none that fix corrupted ones.
View 3 Replies View RelatedI keep getting this minimum segment length message after running tubing routes. I've already configured the tube style and entered the minimum length I want. I place tube fittings before I run tubing, so I don't include fittings/couplings in my tube style. The lengths of the segments are equal to or longer than the segment rule I entered, so I'm not sure why I'm getting this error message. I also get a message saying that a segment will violate the rule once fittings are placed, even though I've opted out of using fittings in the style. To get around this error I've been having to go into each route and edit the sketch to make the problem segments longer.
HP Z400 Workstation
Intel Xeon @ 3.33GHz
12.0 GB RAM
Windows 7 64-bit
Inventor Pro 2014
We are scanning 9x9" B/W aerial photos as RGB, 24bit, 600 DPI on an epson 1640XL on a Dell precision workstation (1GB memory, P4 3GHz(i think)). we scan, and save as a JPG, without incident.
when we try to open it, we get the error - "Could not open X.jpg because an unknown or invalid JPEG marker type is found."
I tried reinstalling PS, as well as the twain scan driver. no luck.
we tried scanning on another computer. the fact that we get the same error makes me think it might be the photos themselves, but what could be in an image that would cause this sort of corruption?
it only happens with certain photos, but there doesnt seem to be anything particular about the photos that would make it happen.
Programme: X4
System: Windows 7 Ultimute 64bit
Installed 01/01/2012 with SP1.
Problem: When I save jpeg files some of them become corrupt and will not open.
I have been using PSP for a number of years and decided to upgrade to X4, now a number of the files that I save in PSP are becoming corrupted and they seem to all be photos which are shot using a pure white background, not all photos are affected, I never had this problem in my previous versions of PSP
I use adobe lightroom which I transfer my raw file into jpeg, this is where i then open the jpeg in X4 and do my main editing, it is when I save the image it saves corrupted and can not be opened or deleted (shows that X4 is still using the file) . it will also not allow me to re transfer the image from my catalog.
There are some good features and I am considering uninstalling and reverting back to my older program (X2).
This may be an issue with the metadata of the image, I exported 2 sets of 50 identical images 50 with and 50 without the Metadata and ran a script which then automatically save the image, about 20 of the images with the metadata ended up corrupted, all the images without the metadata saved fine.
I have been working for the last couple of hours "copying objects" into my part file. I am creating composites from surface data that exists in other part files. I now cannot save my part which I have renamed TEST.IPT for the purposes of this request. This is a common workflow for me when I am recreating a part from multiple imported CATIA files. (I know it is hard to guess withour providing the actual data.)
Problems encountered while saving the document.
Error(s) detected while writing segment PmDCSegment in database TEST.IPT
Error detected while saving object of type MIxTransactablePartition in TEST.IPT
Error detected while saving object of type MIxPartition in TEST.IPT
The attempted write operation did not succeed. Part file may be corrupt.
The database in TEST.IPT could not be saved
I want to draw triangle in segment of polyline in segment direction.
I have target segment and center point of it:
Polyline line = ...
LineSegment3d centerSegment = line.GetLineSegmentAt(centerSegmentIndex);
Point3d centerPosition = centerSegment.MidPoint;
I can find direction of this segment:
Vector3d zaDirection = line.GetLineSegmentAt(centerSegmentIndex).Direction;
Next, I create list of points:
List<Point3d> points = new List<Point3d>();
points.Add(centerPosition);
points.Add(centerPosition.Add(new Vector3d(ZASize, +ZASize, 0)));
points.Add(centerPosition.Add(new Vector3d(ZASize, -ZASize, 0)));
And draw it:
wd.Geometry.Polygon(new Point3dCollection(points.ToArray()));
Ok, I have triangle but... it's not in segment direction, it's X-direction.
I try to rotate it:
points.Add(centerPosition.Add(new Vector3d(ZASize, +ZASize, 0)).RotateBy(0, zaDirection, centerPosition));
But it's not the same as I want.
How I can draw triangle by serment direction?
I'm trying to copy sheets from one dwg file to another in Inventor 2010. I get the error: "Named segment already exists: cannot create or rename". The sheet name is not listed in the target file. Why this error is occurring and how to fix it?
View 9 Replies View RelatedI have a file that is about 125megs, it stopped opening for me. I don't understand why, it's always has opened ever since I created it. Now it freezes my machine, this just started today. I'm running a G4 Dual 1.42mhz os 10.3 and 2gigs of ram. It's the only copy i have, please tell me there's a way to repare it. My Mac keeps telling me to restart every time i try to open it.
View 2 Replies View RelatedI received this message:" Central model is corrupt and must be manually recovered" and do not know how to proceed.
View 1 Replies View RelatedIt is now saying that I don't have the appropriate version of Photoshop for this file.How can I open this?
I know I have a good version, I had been working on the same computer the whole time.I dont know if the file is corrupt or what is happening...
My CS6 photoshop is viewing any file I open as corrupt but when I save them, they are ok in windows preview / bridge etc.. its only showing really weird in photoshop! I dont know what has all of a sudden changed! I haven't changed any settings!
I am on a windows 7, 64 bit PC and this problem is not just limited to my PC, my colleagues also today have this same issue on their PCs too...
I wondered why/how ones preferences ever get corrupted. Ive use PS, since 2.5 on all sorts of PCs, sometimes with it running around the clock for days. Never once had I encountered a corrupted preferences file until now, that is.
What I encountered can only be listed as an observation. Im sure that it is but one possible cause. Still, I thought that Id share my experience.
Up at 4:00AM to start a rush scan job. Everything boots up fine, and I start PS CS2. As its loading the plug-ins, etc., I notice that Sun Microsystems Java wants an update and its icon has appeared in the Tasktray of my XP-Pro SP3. I open it, and click Update Later, or whatever the exact dialog is. It drops back to the Tasktray. PS seems to be taking a long time to load on my workstation, but I give it a few moments. Nothing. Its hung at Reading Text Global Resources. I check Task Manager PS is shown as Not Responding. Odd, this has NEVER happened before in all those years. Not so much as once.
I remembered that there was an update for Extend Script, that I told PS to hold off on. I go to Updates, via Bridge and its still there waiting. I End Task for PS and look for something usable from MS. Of course theres nothing. Event Viewer shows an Application Hang, with no useful info. I install the Extend Script Update, and try PS again. It gets to the same spot and hangs.
OK, I allow Java to update (making sure to NOT allow the installation of the MSN Search Toolbar - sheezh! I try PS yet again. Hang at the same spot.
Re-boot and hang. Though I have said it a thousand times, trash your prefs, it takes a moment for it to sink in. I trash my prefs and all is good with PS. Luckily, I had my dual-monitor Workspace saved, and it only takes a minute to change the default preferences back to what I want.
Normally, I have everything, and I mean everything, set to NOT auto-update. I turn this feature off for every program that I install. I use Premiere a lot, and do not want Norton, or anybody, waking up and phoning home. Ill tell em when to update. Well, I missed Java.
I can only guess that it did its update thing, just at a critical time for PSs loading and blew up the prefs file. Had it popped up a second later, or maybe a second earlier, I doubt that Id have had to trash my prefs. After all these years (decades really), I had a corrupt preferences file.
Im sure there are a myriad things that can corrupt a preferences file, and I am only guessing at what caused mine. However, the timing is perfect, so Java gets the blame.
I have a really weird problem with one of my files. When I click on the text, it changes the text to completely different words. Seems like it is corrupt somehow... see below images to see what I mean. Is there a fix? I'm on CS6 mac OS 10.8.4.
Before:
After:
Out of curiosity I also opened up the file in text edit to see if there was anything obvious, and here's some of the code. I'm assuming this is preview text for search, but either way seems a bit fishy.
<rdf:li rdf:parseType="Resource">
<photoshop:LayerName>Partners</photoshop:LayerName>
<photoshop:LayerText>WE WILL BE...</photoshop:LayerText>
</rdf:li>
Trying to edit the text and saving it out corrups the file.
Flow segment label using total Flow Type travel time for each segment:
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
[URL]....
iMac 27"
os 10.7.4
Extensis Suitcase Fusion
Adobe Creative Suite 5.5
On randon saves and converts within Adobe Illustrator, layers comprising photoshop files appear to have corrupted, and display with horizontal banding
We've been in contact with Apple support who have replaced the Motherboard, Graphics Card, Hard Drive and Power supply - the issue is still occurring
I've swapped out the bluetooth Keyboard & Mouse in favor of a USB and disabled Wifi & Bluetooth to exclude other hardware issues
Processor 3.1 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6970M 1024 MB
Software Mac OS X Lion 10.7.4 (11E53)
Adobe Photoshop CS5:
Version: 12.1
Last Modified: 24/05/2012 16:38
Kind: Intel
64-Bit (Intel): Yes
App Store: No
Get Info String: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) © 1990-2011 Adobe Systems Incorporated
Location: /Applications/Adobe Photoshop CS5.1/Adobe Photoshop CS5.1.app
I import a csv file into my drawing and all the points and figures get drawn correct and on the correct layers.
But I end up getting some extra things also:
1. a little white circle comes in from the marker styles. it comes in on layer V-SURV-NTWK
2. i also get an extra white line that comes in on layer 0.
I have stopped these things from happening now by hitting the light bulb for the "basic" Marker Style and the "basic" Feature Line Styles. But i would really like to know what the Marker Style and Feature Line Styles are and what they are there for.
He's contructed the ships hull using a plane with the schematics in it as background to shape the ship's lines accordingly. He saved his progress butwhen he loads in the 3d max file the hull lines (I believe it's called "splines") are all gone and only the background image remains. The weird thing is, when you start 3d max and select the saved project, you can see the splines in the small thumbnail preview on the side. But when the file is actually loaded, they are gone.
I've checked the 3 auto save files but they all show the same; splines in preview, splines gone after the file has been loaded. I can't imagine that the 3 auto save files are all corrupt. So I'm wondering if there's some kind of setting he might of accidently set off?
Recovering a gimp file that got corrupted. My computer crashed at the wrong moment of time. It only saved 1 layer and nothing else.
View 1 Replies View Related