Photoshop Elements :: Cannot Print With E11 - ICC Profile Is Invalid
Jan 20, 2014
I have Elements 11 and just created a photo album, went to print it and it either comes up with:- Tere was an error opening your printer, Printing functions will not be available until you have selected a printer and reopened any document. or if I get the printer ialogue box to open, then press print it comes up with Could not complete your request because the ICC profile is invalid.
I tried removing Elements from my pc and re-installing it incase I had done something to cause the problem, but makes no difference.
View 1 Replies
ADVERTISEMENT
Oct 30, 2012
I can't print a photo because the ICC profile is not installed. What do I do?
View 1 Replies
View Related
Nov 7, 2012
How can I print & preview with a colour profile in Photoshop Elemnets 11?
Only showing print in " File "
View 1 Replies
View Related
Sep 25, 2013
LR5.2 said that the ICM profile is invalid or missing. My Printer Epson Photo R3000.Older Profile are good.
View 2 Replies
View Related
Apr 18, 2014
I'm getting a message on a print document that I'm working that reads "Document contains an invalid frame. Story text begins - Delete frame and associated story?" Regarless of my choice, ID becomes unresponsive.
View 7 Replies
View Related
Nov 16, 2007
I get this message when I go to print in acad 2008.The following shortcuts in the plotter search were invalid and ignored: (invalid path is displayed here...) ending with .ink.The path exists and yet it says invalid and ignored. I hit OK and it continues to the plot dialog and everything works. How to correct the path or disable the dialog... I looked in the options/files(tab)/printer support file path and they are setup to our printers, but the error continues to pop up.
View 6 Replies
View Related
Feb 13, 2014
it's said "invalid passeword" when i wrote the 24 digit number written on the pocket disk..... what can i do?
View 1 Replies
View Related
Jan 26, 2013
I work with photoshop10 and i got the following message : message format invalid tag id. What can i do to get my photoshop working again?
View 2 Replies
View Related
Jun 1, 2013
trying to install photoshop elements 11 and it says my serial number in invalid. i've typed in every number i see on the back off the case the dvd came in.
View 5 Replies
View Related
Nov 24, 2012
Everytime I try to run the program I get an error message saying "Attempt to access invalid address". I am using Windows 7 64bit.
I have unistalled and reinstalled PSE5.02
Unistalled Google Chrome
Set antivirus to silent/gaming mode
Ran as administrator
Ran in compatitibly mode, Windows XP service pack2
I really need this working, I need to use it for a project thats due Monday!!
View 5 Replies
View Related
May 21, 2013
I'm trying to install on a 2nd computer; I'm getting the error 1324 message: "the path custom shapes contains an invalid character." It won't let me continue installation.
View 1 Replies
View Related
Jan 28, 2013
I must have this item working.
No I don't have Google Chrome or the anti-virus programs mentioned I have Kaspersky Pure
View 7 Replies
View Related
Feb 20, 2013
My computer died and I am trying to install an older version of photoshop elements from a backup drive on a new computer. I get the following error message " Could not complete your request because of missing or invalid personalization information.
View 8 Replies
View Related
Apr 28, 2013
A printer profile working perfectly in CS5 does even not appear in CS6. How do I fix this? (Windows 7 64 bit for CS5 and CS6).
View 10 Replies
View Related
Jan 8, 2013
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies
View Related
Feb 26, 2013
I have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies
View Related
Apr 17, 2013
Using a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies
View Related
Apr 21, 2013
I can't print with my own paper profile in LR4. The colour management option is not available.?
View 6 Replies
View Related
Jul 2, 2013
The subtitle should be "How do I choose the best profile without wasting a lot of time and paper?"
I have an Epson R3000 using Epson premium glossy paper. I am printing from Lightroom (and Photoshop). My understanding has been that the best color match would come from using the Epson appropriate paper profile and letting LR manage the color. However, my output, especially for skin tones had a distinct magenta color cast and really looked terrible. I spent a few hours rechecking settings and making test prints to confirm settings such as turning off color management in the printer. Finally, I called Adobe support. They were very useful and by changing the printer profile from Epson 'spr premium glossy' to my monitor (which is calibrated) profile, I actually get output that matches my screen pretty well. The bothersome part is that I came away with a new understanding that I now have to experiment with profiles when printing.
This is contrary to my earlier understanding that Epson and LR do all the experimentation and that by using the Epson printer, paper and matching profiles I can get reliable color matched output from LR. There must be a reason that printer and paper manufacturers go to the trouble of developing profiles. how to choose the appropriate profile when printing? There is the further question of the best output to send to a professional printer. Should I just set to sRGB?
View 7 Replies
View Related
Jan 20, 2013
how do i add a ds color lab profile to my photo in elements 9? i have installed the profile but i don't know how to add this to my photo?
View 1 Replies
View Related
May 7, 2013
In trying to print with any of my Epson printers, my Photoshop Elements 9 says I can't do it because the ICC profile is missing. What does that mean, but more importantly, how do I get it back so I can print again?
View 2 Replies
View Related
Feb 9, 2013
So My wife and I got two new laptops (Toshiba Qosmio X875) after getting everything installed my wife noticed that all the images she has edited and uploaded (old and new) appear differently than they do in the editor. The color profile is set to RGB as I've read that's where it is supposed to be. She gets the same results when using Lightroom 4. I inserted a side by side screen shot below and you can see a difference where they should be identical.
View 1 Replies
View Related
Sep 11, 2013
I am using an Epson printer and I cannot print from PSE because the ICC profile is missing. What do I need to do to fix?
View 1 Replies
View Related
Sep 28, 2013
I just bought me a new canon EOS 700D, the x-rite Colorchecker Passport and photoshop elements 11. I took a photo of the colorchecker (.CR2-raw file) and followed their instructions to make my own camera profile. Meaning I opened the .CR2-Raw file with Photoshop elements, didn't make any changes to it just directly saved it as a .DNG file. Opened it in the colorchecker software "Color Checker Passport", it recognized the colorchecker on the photo and so I pressed the button to make the profile and to save it. I then restarted Photoshop elements and opened the photo with the colorchecker on it again as a .CR2 raw file. In the instructions it now says change the camera profile to your just made profile, but when I scrolled down the profiles there were only the standard profiles "Adobe Standard, Camera faithfull, camera landscape" and so on. Mine was not there. So I checked the paths were my profile and the standard profiles are saved to. I then put my new profile into the same folder as the standard profiles for my camera, restarted PSE 11 (and the computer after a couple of tries) and tried again. Again my profile was not in the scroll down menu where it should be. I even reinstalled all the software concerned with this but it didn't work. My system is Windows 7 64 bit and photoshop elements 11 and X-Rite software are updated.
the .dcp camera profiles I make with the colorchecker software are only 2 kb big but the standard profiles are more like 200 kb.Additiv after reinstalling everything and updating again, the camera profile folder for my canon eos 700D is missing. The folder for teh newest model of that line is the 650D.
View 3 Replies
View Related
Mar 24, 2014
In trying to get to grips with the Color management aspects of PSE11, I have encountered the following problems: Having selected "Display" a sequence of clicks (Change display settings -> Advanced settings -> Colour Management -> Colour Management tab -> Colour Management) gives a screen which includes the headings:Device Profile and Viewing Conditions Profile.
1. Device Profile. Besides sRGB and ARGB, the profile list includes the profiles for all of the Epson papers.I changed the Profile to an Epson Grayscale, this was accepted within the menu, but there are no changes from normal when I viewed the image on the Windows screen or within PSE11. ("normal" is sRGB or ARGB). I thought it worth a try to test that, if I wanted the display image to closely represent what I would get on a particular Epson paper, this may be a way to do it.So what is the purpose of all of the paper Profiles appearing in the Display listing?
2. The Viewing Conditions Profile has also several options. I have tried to find the criteria for choosing one rather than the other, but failed to find any information. I seek general guidance rather than the details of the Profiles.
Selecting Image on the PSE11 menu across the top of the displayed image, and then Convert Colour Profile, I tried this process on an image, converting tiff to sRGB. When saved there was an extra asterisk in the saved title but in this case, the file was still labelled tiff and there was no change in the number of Mbs. If a conversion has taken place, how is one to know? Does saving a tiff file as jpeg change its colour profile? When is it useful to use this feature?
View 1 Replies
View Related
Nov 7, 2012
I use an outside service to make prints. How can I save an image in PSE 11 in either TIFF or JPEG format with the color profile for the outside lab's printer?
View 4 Replies
View Related
Sep 19, 2012
I am using pse10 with an epson workforce 60 printer and everything prints out with a green tinge through it. Also the print is nothing like what is on my screen. I am using a Visi-sub icc profile for sublimation printing.
View 2 Replies
View Related
Jan 4, 2013
I am using Elements 11 on a Windows 8 computer. When I started to use the face tagging feature, the 'people' section showed each of my added people, with a profile picture of each one. Now, however. I can add people but they do not appear in the people section at all.
View 1 Replies
View Related
Feb 18, 2014
Recently, I have needed to convert my CR2 or DNG files to CMYK profile for a printer. It is my understanding that PS Elements (any version) does not support CMYK profiles. I am an avid amateur I think I need to change from Photoshop Elements to CC or PSCS. What would be the most cost effective way to accomplish this goal?
View 2 Replies
View Related
Feb 17, 2013
In Elements 11, my "people" profile pictures are at times blank, even though the faces are tagged.I just see the person icon instead.
View 5 Replies
View Related
May 28, 2013
How can I apply a touch of rouge to a black and white profile in Elements 11?
View 3 Replies
View Related
