I added a lot of dimensions to my drawing(in model space) and none of them are visible in paper space. I tried turning the layer off and on, but it still doesn't show them.
View 9 RepliesI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View RelatedWe are debating an issue here where I work. I work in the following way, once my drawing is all done and I've created my viewports, I lock it and do all my dimensionning annotive and in model space by passing thru my view port, my co worker him, he works with view ports also but does his dimensioning on the paper space layout and not in annotative.
Dimensions in model space or dimensions on the paper space? While I got your attention what is your opinion on annotative dimensioning?
I had the need on occasion to dimension in Paper Space. I set up a "Dim Style" to accomplish this in either 1/8" or 1/4" Scale. The problem I am having is the consistency of the actual dimension.
For example: I could draw a simple box 10'x2'. When I dimension in Paper Space, sometimes it correctly displays the dimensions and sometimes it incorrectly displays the dimension.
I attached 2 screen shots of what is happening. Notice the dimension on top of the box shows 10', but when I dimensioned the bottom of the box it shows 480'. This seems to work at random.
The other screen shot shows the Dim Style settings I used.
When dimensioning in paper space and move or make any adjustment to the viewports the dimensions go haywire and move of the parts but not all dimension and not all viewports are doing this. I'm using the same dimension style and templates that I normally use.
View 2 Replies View RelatedI offen't have head the discussion about where to put the dimensions model or paper space?
I always say the best place to put the dimension is the model space especially when you now have the annotation scale to control it.
I have been dimensioning my 3-D model in paper space, but my dimensions are wrong and I don't understand why. The height on this drawing attached was drawn as 3'-9" but everytime I try to dimension it in paper space it reads as 3'-3 1/4". And my width should be 2'-6" and it keeps reading as 1'-11 1/4". I have no idea where this came from, and I have double checked my work several times now, it was drawn correctly. And on top of all that, now that I have been messing with it, my dimension no longer changes to oblique the right way, I think I may have changed a setting along the way and made things worse.
View 2 Replies View RelatedI am on ACAD 2012 overlaying dimensions in paperspace to objects in model space..The dimensions keep changing to an incorrect number..Can't identify when it is happening yet. The dimensions are always larger
If I change dim style and back again the correct dimension appears. I can then matchprop to get the other dimensions to appear correctly. But twenty minutes later they are all changed again
I turned of Annotative scale for dimension features and use overall scale of 1.
in paper space the blue lettering in the wc area shows up, but in paper space they do not, there is no layers turned off or funny colours problems as far as I can see.
I tried putting the blue lettering on to the remtex layer that shows up in paper space and still its the same ?
Is it possible to use the viewport on one page to show the paper space of a different page?
View 1 Replies View RelatedMy mtext that i have created in model space is not visible in my paper space viewports. What can i do to fix this?
View 5 Replies View RelatedI used "save as" to create a new drawing from an existing file that I did not have any problems with. For some reason, the mtext that already existed shows up in my viewports as well as new leader text, but any new mtext that I've added does not. The viewports were also already existing from the previous file. I have not changed any settings either!
All of the layers are on, and I've tried deleting and re-adding the viewports with no luck. All of the text settings are the same as the original file, and like I mentioned before I did not have any problems with the previous file.
I am on ACAD 2012
I am using paper space dimensions and have a problem that they keep changing
I have attached a drawing demonstrating my problem. The square is 12' x 12''. Everytime the file is opened DIM SCALE LINEAR is multiplied increasing all dimensions by the multiplier. It does this each time the file is opened.
You can right click remove overrides on the dimension to get it to appear correctly (I don;t have any overides the software is overiding on open.
My "center" line shows up fine in model space, but just solid lines in paper space.
View 7 Replies View RelatedIn 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedI feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedI have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedI am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedI use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies View RelatedI'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View RelatedCAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies View Related