It shows the old position of lines after a zoom, or rotate or move, etc. And it shows half of my dimension values.
Also I seem to have some ghost projections of assembly parts when I do the assembly tutorials.
Like holes and wire frames on strange places on my screen.
I have to zoom in and out randomly and wish for it to go away at some point..
How to scale drawing with dimension lines without changing dimensions in dimension lines? I got drawing with correct dimension lines but geometry is wrong.
View 7 Replies View RelatedI have a drawing of an assembly and have a sectioned view so as to see the internals. The assembly is very long so I've used 3 breaks to shorten it to fit the page. What I'm wanting to do is create a sketch and project the geometries of several parts so I can fill them in with color. The problem I'm having is when I click the lines I want projected, the lines don't form over the part but form where I assume they would be if there were no breaks on the view. I do this all the time and it works fine, but it's usually with only 1 break. I'm thinking it's the 3 breaks that are causing the problem.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I'm adding in inspection dimensions for a PPAP submission drawing and have found that I cannot set hole and thread dimensions as inspection dimensions. I'm quite surprised to find that this option isn't available. Is it there, just hidden, or is it really not available to me?
To the top right of this picture is the inspection dimension I want and to the left the thread dimension which I can't get into this format.
In 2010 and previous releases I recall being able to show the feature dimension by right clicking "Show Dimensions" and then being able to double click on any visible dimension and change its value. I don't see this behavior in 2012. Is there a setting to turn this on?
View 7 Replies View RelatedI have made thousands of sheet metal parts and their associated drawings without issue but this time, I made a part and attempted to make a drawing but dimension lines won't attach to certain geometry in the drawing. It acts like it will until I click the second line for the dimension then it errors, telling me the same error message that comes up when you delete a feature that previously had a dimension.
I also can't place an origin for doing a hole chart, for example. It just turns purple and says it isn't attached even though it clearly is.
I have a problem with Inventor 2013. The dimension lines have disappeared. I've been through all the dimension styles and layers to make sure I hadn't turned one off
All other drawings are fine and if I create another even using the same model it works just fine but I'd rather find out why than re-do the whole drawing.
I have a template IDW that i use for bearings. When I opened it today I noticed that two of the dimension lines were missing. The dimension and arrows are there. I tried deleting them are recreating them with the same result.
The interesting thing is, when I created the dim above the part it was fine, when I dragged it below the part the lines went away. After that no matter were I moved it the lines would not reappear.
I installed SP1 a while ago and just now installed the update to SP1 (DL20857064.zip). It did not fix the problem.
Is it possible to hide the dimension lines like in the attached picture?
Autodesk Inventor 2012
We resently upgraded to Inventor 2013 and since then we have been having an issue of dimension and leader lines being hidden under a text box or some other drawing entity.
This is very confusing since the text box does not have a white out associated with it, nore is there a way to put the test box to the back and dimension lines to the front...
It seems like our puppet masters that program this amassing tool where up to something and didn't quite get there.
IT sure would be nice (or an absolute requirement) that this gets fixed so I don't have to learn new hoops to jump through to get a quality drawing out of Inventor.
I am wondering about something called a "dimbreak" command to break demension lines. I heard it has been used in AutoCad. Is it also something available to Inventor users? I can't find anything when I search for it in Inventor and I need to be able to "explode" or otherwise change my dimensions manually so I can break dimension lines as they pass over other dimension lines.
View 2 Replies View RelatedFor some reason, if I convert an IDW to a PDF, the dimension lines come out very faint.
View 1 Replies View RelatedIs it possible to break a dimension line as shown in attached jpg ?
It is possible in AutoCAD I know but is it possible in Inventor ?
Is there any opportunity to make changes in standard library in Autodesk Inventor 2010? For example I want to add in a GOST Elbow 90deg a few new lines with dimensions. The smallest Elbow is with DN40, and I need DN20 DN 25 DN 32.
Or Is there Just Two ways - to make my own Elbows, or copying standard Lab and then making changes?
I was wondering is there a way to have a hole dimension with multiple leader lines. Using Inventor 2011
View 1 Replies View Relatedwe are using AutoCad 2011 and 2008.When any draw is open everything seems to be just fine, but when we print it out then it came out with lines around the objects(green, grey...)
We have tried 4 different printers with all drivers that we could found on internet, with no success. On the ploter we aren't having any problems and the lines are gone.Also the AutoCad 2006 is without the problems, but we want to move on to the version 11
Is there any setting which we should change?
When I print out a certain drawing, there are a couple of lines that show up that are not visible in the drawing or on the preview of the drawing. Therefore, I don't know where the lines are coming from nor can I delete them.
View 2 Replies View RelatedInventor 2010 suite
If IV2010 allows hiding of the DIMENSION lines and ARROWS in an IDW files? I found a thread from 2009 that says it is impossible.
However, I found a way to hide them on some RETRIEVED dimensins, but not on others.
How to MANUALLY, or to create STYLE that hides MY choice of:
1. EXTENSION LINES,
2. DIMENSION LINES,
3. ARROWS
Am getting these lines on my crossection when I plot my crosssection sheets. they don appear when I preview. they only appear after printing. I really need to print these crosssections for submission.
Am using civil 3d 2013 update 2.1
Civil 3D 2013 64bit SP1
Elitebook 8540w
Core i7 2.8GHz, 8Gig RAM
NVIDIA Quadro FX880
160Gb SSD
I have autocad 2010 installed on dell n5537, i5, windows 8, 64 bit,.. whenever i open an existing cad file,.. it gives strange lines emerging,... as shown in the screenshots attached, most of the times they emerge from the corners,..
these lines hide n show, when i pan/zoom or move the dwg .
This used to work, then my computer dies and AutoCad was reinstalled. I am trying to dimension some cut-outs in a 19" rack panel. I can dimension them, it shows the correct dimensions but then when I hit enter it wont save the dimensions. I've gone into DIMSTYLE and everything looks fine but I cant get this simple task to work.
autocad problems.jpg
I have have to use a program to do these hydraulic counts that must be done in decimal feet. So, what I want to be able to do is when I make a dimension that is 12'-8" for example, that it read 12.667.
View 6 Replies View RelatedI have attached a AutoCAD Drawing with this message,.
In that drawing, dimensions are in some settings like, ext.line color - red, text color - green,...
But all objects(lines, dimension lines, texts) are displaying in white color only,.
This drawing drawn in old versions (not sure which version)
But properties of the objects are as per settings (see attached picture)
I'm inserting dimensions and the tics keep coming out huge and not on the dimension line, in fact there's one on either side 20 ft out. If I change the drawing scale in the tab at a the bottom the tics get smaller and closer in, but they are still off the dimension string by a long shot.
View 3 Replies View RelatedI have a problem with Dynamic Input suddenly displaying dimensions in the middle of a line rather than on screen as I work. What I mean is that if I draw a line the length of the line is displayed at the center of the line. When I zoom in to one end of this line the display of the length of the line is no longer displayed on screen but remains at the center of the line. I use AutoCAD 2008.
View 5 Replies View RelatedI think this is a live paint issue, but I'm not totally sure... I create an image and filled it in using live paint. It looks just fine when I view it in Illustrator and fine again when I save it as a jpg or gif or png. But once I save as a pdf, I get these tiny white lines where the edges of some of the artwork are.
View 9 Replies View RelatedWhen I'm drawing something with two windows (one is usual other in pixel preview) I have some strange white lines in pixel preview window. URL....
View 7 Replies View Relateda while back i had this problem where pictures wher looking funny when blurred but never realy had an answer this is what i am talking about [URL}...
Now i took this with my phone because when i take a screenshot people say the picture looks fine ,I have tried alot of things but i can't fix it here is a picture of it as a ascreenshot [URL]...want a fix for this as most of my pictures become crap when i try to make something nice in photoshop !
I am running AutoCad 2000 and for some reason in recent work I no longer have the command lines visible on screen.
View 9 Replies View RelatedI have a group of dimension objects gather up by a selection set (objSS). I can screen each one one of these dimension by the lines
Dim objDimStyle As AcadDimStyle
For Each objDimension In objSS
'
'
Next
How is possible to assign the property Dim Style to each one of my objDimension to an Style that I have already created? I can not find this property available for my objDimension.
I am using ObjectArx with C# and I am wondering how to take the dimensions and dimension unit using the ObjectArx SDK. Is there possible way and what is the best approach.
View 1 Replies View Related