When I print out a certain drawing, there are a couple of lines that show up that are not visible in the drawing or on the preview of the drawing. Therefore, I don't know where the lines are coming from nor can I delete them.
View 2 Replieswe are using AutoCad 2011 and 2008.When any draw is open everything seems to be just fine, but when we print it out then it came out with lines around the objects(green, grey...)
We have tried 4 different printers with all drivers that we could found on internet, with no success. On the ploter we aren't having any problems and the lines are gone.Also the AutoCad 2006 is without the problems, but we want to move on to the version 11
Is there any setting which we should change?
I have autocad 2010 installed on dell n5537, i5, windows 8, 64 bit,.. whenever i open an existing cad file,.. it gives strange lines emerging,... as shown in the screenshots attached, most of the times they emerge from the corners,..
these lines hide n show, when i pan/zoom or move the dwg .
Am getting these lines on my crossection when I plot my crosssection sheets. they don appear when I preview. they only appear after printing. I really need to print these crosssections for submission.
Am using civil 3d 2013 update 2.1
Civil 3D 2013 64bit SP1
Elitebook 8540w
Core i7 2.8GHz, 8Gig RAM
NVIDIA Quadro FX880
160Gb SSD
It shows the old position of lines after a zoom, or rotate or move, etc. And it shows half of my dimension values.
Also I seem to have some ghost projections of assembly parts when I do the assembly tutorials.
Like holes and wire frames on strange places on my screen.
I have to zoom in and out randomly and wish for it to go away at some point..
We recently switched to 64-bit ACAD on dell M6500 laptops. I used to use dynamic input all the time, but after the switch I noticed when using Dynamic input turned on, when you go to draw a LINE, after you pick the first point, the mouse "lags" and becomes "glitchy". I had the problem "fixed" once by our IT guy, he updated the driver or something and everything was fine.
But now it is doing it again.
I have a problem in polyline width. when i set polyline width in one drawing shows solid line & in another drawing shows blank lines.
View 9 Replies View RelatedIm trying to plot a drawing and the grey lines are printing on top of black. how do I get black to print on top of grey? I am using MEP2013
View 4 Replies View RelatedHow to scale drawing with dimension lines without changing dimensions in dimension lines? I got drawing with correct dimension lines but geometry is wrong.
View 7 Replies View RelatedI am trying to build a 3d model and I am requirng to draw 2d sketches in the side view e.g right but all the happens is that the polylines do not go at the angle I need them at they jsut go parallel to the bottom. Also how do i create like a plane which I can draw a flat sketch on which i can set an offset from my first sketch?
View 1 Replies View RelatedHad this drawing sent to me , and I always like to show the lighting switch lines dashed, but the guy who did this drawing had all his lines solid, anyways I have tried to change them but no matter what line i choice non of them show up as dashed in paper space or when printed?
I have added just part of the drawing as it was to big for the whole drawing to upload here
I just started getting strange characters on labels that I print from a data table. The process I use is to use mtext with fields to get infromation from the client abbreviation, job name and part numbers onto labels used to keep track of parts and for assembly.
I have used this for some time with no problems but today..... Attached is the template I use and a nested drawing using the same template but with actual data. The one with data works with no problems. I'm pretty sure no variables have changed between them.
I think this is a live paint issue, but I'm not totally sure... I create an image and filled it in using live paint. It looks just fine when I view it in Illustrator and fine again when I save it as a jpg or gif or png. But once I save as a pdf, I get these tiny white lines where the edges of some of the artwork are.
View 9 Replies View RelatedWhen I'm drawing something with two windows (one is usual other in pixel preview) I have some strange white lines in pixel preview window. URL....
View 7 Replies View Relateda while back i had this problem where pictures wher looking funny when blurred but never realy had an answer this is what i am talking about [URL}...
Now i took this with my phone because when i take a screenshot people say the picture looks fine ,I have tried alot of things but i can't fix it here is a picture of it as a ascreenshot [URL]...want a fix for this as most of my pictures become crap when i try to make something nice in photoshop !
Which size do you use to print off a drawing that can be folded into A4 size?
View 9 Replies View RelatedThe grid lines I used when creating a watercolour are showing when I print the image, however they are not showing when I am in Photoshop, making it impossible for me to correct them. Is there a tool I can use to bring these lines to the forefront so that I can correct them?
View 4 Replies View RelatedI own a company that designs and sells sewing patterns for men's clothing to be made by home sewers. I have my patterns professionally drafted and sent to me as a poster-sized PDF. I then open it in Illustrator, move things around, change some fonts, etc... and make a 34" wide copy to be printed at a copy shop. That's all fine and dandy, and it prints out perfectly.
I then use Acrobat XI Pro to open the 34" version and print to Adobe PDF with the poster setting of 7.5" x 10" for people to print at home. Then I open each page of the multi-page PDF in Illustrator to add a border, alignment marks, page numbers, etc... and save as the same PDF.
Now here is where the weirdness begins. For some reason, there are random chunks of lines (identical to the pattern lines throughout the rest of the document) that aren't supposed to be there. They don't show up on my screen when I open the file in Illustrator or Adobe, but they get printed every time. I've even started the whole process from scratch, tested the 34" wide version at the print shop (prints perfectly), and split it into pages again, and the phantom lines are still there!
I've attached a photo I took of one of the pages in question. The file on my screen is the exact one I printed, and as you can see, they are definitely not the same
I have been saving the PDF files as Press Quality from Illustrator.
Is there a printer setting i need to select so that a wipeout i create is applied to the print? It looks like it is hidden on the screen but when it prints out it is not hidden
View 6 Replies View RelatedI'm having a problem with printing. When i print a page all line and letters are printed in gray scale BUT the hatches will print out in color. I was able to view the same drawing under a different login and found it was the drawing is in Gray Scale when printing (but not viewing). How do I change the settings on the drawing to print out full color
View 1 Replies View RelatedI have vertical lines spaced at 1/2 inch in my printed pictures and would like to get rid of them. It happens with Photoshop CS-6 but not with Microsoft Photo Editor. I'm using a HP Officejet 6500A Plus and the color printing is fine.
Additional info: I am using Windows 7 on a Dell. Service pack 1, 32 bit system.
It happens with pdf files, jpeg, and psd. I am managing colors with the printer. I am using best quality printing. I have tried Color Smart and Adobe settings for RGB on the printer dialog page. I have tried telling the printer that I am using HP premium plus, plain paper and Other photo papers (My paper is actually Staples high gloss photo supreme).
What is remarkable to me is that I get high quality prints with the same printer, same paper, same settings using Microsoft Photo Editor - no vertical lines at all. However MPE is not very versatile, and the pdf I am currently trying to print will not load onto MPE.
why are there lines across printed picture
View 1 Replies View RelatedinDesign CC
OSX Mavericks
Acrobat X1
Kyocera FS 10-20D
After exporting a pdf from indesign (high quality settings), pdf looks fine on screen and in print preview but printout misses 2 lines of text for no apparent reason.
Document also prints fine direct from indesign.
Have tried various fonts (including standard ones) with no change.
Searched for a new driver for my printer but the last update was for OS 10.5.
So I use a seperate program outside AutoCAD to create my 3d models - do a high quality raytrace and get a really nic, clean, image. When I put the image into autocad to use in my drawing sets, the image loses its clarity and the edges look a bit jagged.
View 7 Replies View RelatedJust upgraded to REVIT 2013 and now many types of lines are not visible on screen- randomly it seems. Also, sometimes they don't print, either. I've tried increasing the fineness of the view, changing the material definitions, etc. Most often this is happenning when I have opened an old file and had it automatically update the file. Also, it seems to happen within asurface texture, but it is not limited to that circumstance.
View 1 Replies View RelatedAs you can see in the attached images their are tiny black holes that appear on the plotted pdf that are not there in paper space. I use the 3d clip command for my viewports to split up the tower into sections. The only thing I can think of is that for some odd reason when plotted the plot routine picks up these bolt holes that are suppose to be clipped out. how to prevent this?
View 2 Replies View RelatedI am printing to a Brother laser printer and a Kodak inkjet using logos in a size I have never used before. None of the content is postscript, none of it should have halftone, and none of it is bitmap-based. I have resized simple CDR and AI vector line art logos for clothing care from large size (about 4") down to 0.25" for a project I am working on. Uniform fill in black is used and some of the logos have outlines and some do not. When I print the tiny logos on the laser printer, even with a DPI or 600 or 1200, some (not all) of the lines have a noticeable saw tooth appearance under magnification, instead of smooth. Fonts that are around 5-point print with clean lines. When I print on the inkjet printer with the same DPI settings, the logos appear smooth under magnification. There may be a hint of a saw tooth, but it is barely noticeable. Font that are around 5-point print with clean lines. Perhaps I went beyond the capabilities of the laser printer, but I question that because the fonts print cleanly with much finer lines than in the logos. Note that I did notice a 45 degree halftone appearance in laser printed text with a uniform fill that was much larger than the logos, even though it is not postscript. This did not occur with the inkjet.
how I can make these logos have crisp solid lines in the tiny size I am using? I'm not printing separations. I haven't found any settings in CorelDraw X5 to fix this.
I just printed of the design for my first t-shirt. There are faint horizontal lines, about 1/2 inch apart, thru an ellipse with a green-blue fountain fill that are not part of the design. Is this my printer, or is there something in the program that I am (not?) doing?
View 6 Replies View RelatedIs it possible to either print or save an image that shows the crop lines from Lightroom (i.e. shows what is both in AND out of the image as it is cropped). I'm working off a scanned negative and I want to show my printer just how to crop the image. She was hoping to see both what's inside and outside the crop? Possible to get that to her either by printing that from my computer or emailing it to her?
View 1 Replies View RelatedArabic font in the AutoCAD,
I’m wondering why the Arabic fonts text appear correctly on the screen but when the they are printed then they are destroyed! Screenshot below.
Why the Arabic fonts texts fail to appear correctly when they are printed?
How do I correct black lines running horizontally through a printed photo?
View 1 Replies View Related