Photoshop :: Vertical Lines In Printed Pictures
Feb 24, 2013
I have vertical lines spaced at 1/2 inch in my printed pictures and would like to get rid of them. It happens with Photoshop CS-6 but not with Microsoft Photo Editor. I'm using a HP Officejet 6500A Plus and the color printing is fine.
Additional info: I am using Windows 7 on a Dell. Service pack 1, 32 bit system.
It happens with pdf files, jpeg, and psd. I am managing colors with the printer. I am using best quality printing. I have tried Color Smart and Adobe settings for RGB on the printer dialog page. I have tried telling the printer that I am using HP premium plus, plain paper and Other photo papers (My paper is actually Staples high gloss photo supreme).
What is remarkable to me is that I get high quality prints with the same printer, same paper, same settings using Microsoft Photo Editor - no vertical lines at all. However MPE is not very versatile, and the pdf I am currently trying to print will not load onto MPE.
View 1 Replies
ADVERTISEMENT
Aug 17, 2003
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies
View Related
Dec 22, 2012
How do I eliminate vertical streaks in a printed picture?
View 3 Replies
View Related
Sep 1, 2013
I took a short video on my iphone of my sister-in-law's wedding. I want to transfer the video to my CS6 Cloud. Can this be done? Can I transfer it to photoshop or is there another part of the CS6 that would work better for this type of project? I have "streaming" from my iphone to my mac computers and the pictures go into my iphoto library. Can I "stream" the video to photoshop instead and then create "still shots" so I can edit individual photos to put in a wedding album?
View 4 Replies
View Related
Oct 29, 2012
I have cropped some pics during the editing process and when I go to print them out the pixels are really messed up. I am using a Nikon D3100. Maybe I am saving them wrong or something. I am saving them as JPEG.
View 4 Replies
View Related
Jan 23, 2013
The grid lines I used when creating a watercolour are showing when I print the image, however they are not showing when I am in Photoshop, making it impossible for me to correct them. Is there a tool I can use to bring these lines to the forefront so that I can correct them?
View 4 Replies
View Related
Sep 12, 2012
When I print a bitmap or picture a black line is also printed on top of it, what can I do? since clients don't like that line.
Corel X6, Cor i3, 4 Gb.
View 11 Replies
View Related
Mar 15, 2014
why are there lines across printed picture
View 1 Replies
View Related
Oct 22, 2013
How do you set PS6 to open vertical pictures larger than 8.33%?
View 1 Replies
View Related
Oct 12, 2013
How do I correct black lines running horizontally through a printed photo?
View 1 Replies
View Related
Nov 26, 2013
When creating a slideshow, how do I put two vertical pictures next to eachother so they appear together during playback? (I have Lightroom3).
View 1 Replies
View Related
Aug 21, 2013
I own a company that designs and sells sewing patterns for men's clothing to be made by home sewers. I have my patterns professionally drafted and sent to me as a poster-sized PDF. I then open it in Illustrator, move things around, change some fonts, etc... and make a 34" wide copy to be printed at a copy shop. That's all fine and dandy, and it prints out perfectly.
I then use Acrobat XI Pro to open the 34" version and print to Adobe PDF with the poster setting of 7.5" x 10" for people to print at home. Then I open each page of the multi-page PDF in Illustrator to add a border, alignment marks, page numbers, etc... and save as the same PDF.
Now here is where the weirdness begins. For some reason, there are random chunks of lines (identical to the pattern lines throughout the rest of the document) that aren't supposed to be there. They don't show up on my screen when I open the file in Illustrator or Adobe, but they get printed every time. I've even started the whole process from scratch, tested the 34" wide version at the print shop (prints perfectly), and split it into pages again, and the phantom lines are still there!
I've attached a photo I took of one of the pages in question. The file on my screen is the exact one I printed, and as you can see, they are definitely not the same
I have been saving the PDF files as Press Quality from Illustrator.
View 14 Replies
View Related
Feb 16, 2011
Had this drawing sent to me , and I always like to show the lighting switch lines dashed, but the guy who did this drawing had all his lines solid, anyways I have tried to change them but no matter what line i choice non of them show up as dashed in paper space or when printed?
I have added just part of the drawing as it was to big for the whole drawing to upload here
View 9 Replies
View Related
Feb 12, 2014
inDesign CC
OSX Mavericks
Acrobat X1
Kyocera FS 10-20D
After exporting a pdf from indesign (high quality settings), pdf looks fine on screen and in print preview but printout misses 2 lines of text for no apparent reason.
Document also prints fine direct from indesign.
Have tried various fonts (including standard ones) with no change.
Searched for a new driver for my printer but the last update was for OS 10.5.
View 8 Replies
View Related
Mar 25, 2013
Just upgraded to REVIT 2013 and now many types of lines are not visible on screen- randomly it seems. Also, sometimes they don't print, either. I've tried increasing the fineness of the view, changing the material definitions, etc. Most often this is happenning when I have opened an old file and had it automatically update the file. Also, it seems to happen within asurface texture, but it is not limited to that circumstance.
View 1 Replies
View Related
Apr 21, 2011
we are using AutoCad 2011 and 2008.When any draw is open everything seems to be just fine, but when we print it out then it came out with lines around the objects(green, grey...)
We have tried 4 different printers with all drivers that we could found on internet, with no success. On the ploter we aren't having any problems and the lines are gone.Also the AutoCad 2006 is without the problems, but we want to move on to the version 11
Is there any setting which we should change?
View 4 Replies
View Related
May 11, 2012
When I print out a certain drawing, there are a couple of lines that show up that are not visible in the drawing or on the preview of the drawing. Therefore, I don't know where the lines are coming from nor can I delete them.
View 2 Replies
View Related
May 26, 2013
I am printing to a Brother laser printer and a Kodak inkjet using logos in a size I have never used before. None of the content is postscript, none of it should have halftone, and none of it is bitmap-based. I have resized simple CDR and AI vector line art logos for clothing care from large size (about 4") down to 0.25" for a project I am working on. Uniform fill in black is used and some of the logos have outlines and some do not. When I print the tiny logos on the laser printer, even with a DPI or 600 or 1200, some (not all) of the lines have a noticeable saw tooth appearance under magnification, instead of smooth. Fonts that are around 5-point print with clean lines. When I print on the inkjet printer with the same DPI settings, the logos appear smooth under magnification. There may be a hint of a saw tooth, but it is barely noticeable. Font that are around 5-point print with clean lines. Perhaps I went beyond the capabilities of the laser printer, but I question that because the fonts print cleanly with much finer lines than in the logos. Note that I did notice a 45 degree halftone appearance in laser printed text with a uniform fill that was much larger than the logos, even though it is not postscript. This did not occur with the inkjet.
how I can make these logos have crisp solid lines in the tiny size I am using? I'm not printing separations. I haven't found any settings in CorelDraw X5 to fix this.
View 6 Replies
View Related
Feb 3, 2012
I just printed of the design for my first t-shirt. There are faint horizontal lines, about 1/2 inch apart, thru an ellipse with a green-blue fountain fill that are not part of the design. Is this my printer, or is there something in the program that I am (not?) doing?
View 6 Replies
View Related
Aug 17, 2012
Is it possible to either print or save an image that shows the crop lines from Lightroom (i.e. shows what is both in AND out of the image as it is cropped). I'm working off a scanned negative and I want to show my printer just how to crop the image. She was hoping to see both what's inside and outside the crop? Possible to get that to her either by printing that from my computer or emailing it to her?
View 1 Replies
View Related
Sep 4, 2012
How to draw vertical lines at a chosen regular interval/period ? I want to have a vertical line every 4 mm.Without havind to drag and drop a new line from the previous one...
I need about 20 vertical lines spaced of x mm..At the end it should look like a table without the horizontal lines
View 1 Replies
View Related
Oct 8, 2012
Looking for the process to straighten the lines on an equirectangular panorama I have made with a series of images with a 15mm fisheye lens. I would like to create a true parallel with these files if possible.
View 3 Replies
View Related
Nov 3, 2013
I've received two orders of CDs for a client, and in the printed artwork there are some flaws that have me wondering what to do to avoid this.
Files were submitted in PDF format with text converted to curves. I believe the artwork is then imported into AI at the other end before going to print.
Along the edge of an object with a drop shadow, there is a fine white line showing. On the two products with identical artwork, the line shows on different edges, but appears to be where the drop shadow ends.
In other spots, there is what I would call "scratches", where, within an image there is a fine white line. This is not an edge or overlap, so I'm at a loss for this.
In another place, one character in a word essentially did not print. So I'm wondering what my "best practice" would be to avoid this. Should I "flatten" everything when I'm done, essentially converting the entire page to a single 300DPI bitmap?
Should I include text in the flattened bitmap, or is it best to leave as curves? My gut says leaving as curves preserves maximum resolution, but does it matter if it is not being scaled?
I've never before had issues with getting artwork printed from PDFs. In most cases, I imagine the print is created directly from my submitted PDF.
View 1 Replies
View Related
Aug 19, 2006
When I blend layers using multiply, and lower the opacity of the top layer (such as to compensate for too much flash), photoshop puts all these vertical lines on the image. The only time they are not visible is when opacity is set to 0% or 100% for the top layer.
View 2 Replies
View Related
Apr 28, 2012
What should I do to “Layer 1” (the single image) to get-rid of those Horizontal and Vertical lines from pattern? While repeating as the Background Image into the HTML page, those Horizontal and Vertical lines does not look nice.
View 5 Replies
View Related
May 24, 2012
I have the beta installed but I also installed the trial of CS6 on another computer.. Both do the exact same thing with the Adaptive Wide Angle filters. I set a line as straight, mark as vertical (2 lines really) and then process. The lines that are vertical come out wavy... best way to describe it..
I add the 2 control lines to the very outside most windows where the windows meet the brick... This is a closeup of the output... I don't know when straight lines became waveforms.. but they do with this filter!
View 2 Replies
View Related
Feb 18, 2014
Is it possible with Xara to create vertical lines in a shape? Think of the white house dome, but from a top down view. I am trying to create some domes in my maps that have an effect much like that. I know with the contour tool I can create a dome with horizontal lines, but is there a way to do it with vertical lines?
View 5 Replies
View Related
Feb 14, 2012
I seem to be having an issue with polylines and a few other things like rectangle, they will only draw in up and down movements and not draw to the left or right.
View 4 Replies
View Related
Aug 26, 2011
I am looking for a quick way to align vertical pairs of lines that are unequal distance apart and sometimes unequal length so that midpoint between lines are aligned. Right now I draw horizontal lines between each set and use a vertical line from one of these to align the other pairs (red lines on example).
If there is no easy way already incorporated in AC then my thought is a button that will draw lines on a specified layer other than the current layer and in a specified color, and another button to delete everything on that specified layer.
View 6 Replies
View Related
Oct 30, 2007
I seem to be having a few issues with Wipeout's and PDF's. When I PDF a drawing that contains a Wipeout, when printed, the Wipeout becomes a mass of vertical lines, and as such has the opposite effect of what I am after.
View 9 Replies
View Related
Jul 19, 2012
I have text that I live traced and I am trying to mask vertical lines through the letters. When I do this the text turns white. When I ungroup and do it one at a time only one letter works the others turn white. When I use make a compound path still only one letter will work and the other letters turn white.
I just purchase CS6 and I have not had time to do tutorials and I have a deadline to meet...
View 10 Replies
View Related
