I have text that I live traced and I am trying to mask vertical lines through the letters. When I do this the text turns white. When I ungroup and do it one at a time only one letter works the others turn white. When I use make a compound path still only one letter will work and the other letters turn white.
I just purchase CS6 and I have not had time to do tutorials and I have a deadline to meet...
I choose the vertical type tool or the vertical type on a path tool or the vertical area type tool...and all I get are letters that are rotated 90 degrees clockwise that go down in a vertical line. The effect is the same as if I took one of these lines that I am typeing here and rotated the entire line 90 degrees clockwise. That is not the effect I want. I am tying to get vertical letters stacked on top of one another in a line going vertical. I watched videos and they simply pick the tool and it functions this way, but when I pick the same tool I do not get this vertical orientation of the individual letters, but the 90 degree rotated letter.
View 5 Replies View RelatedI moved an object I was creating to the artboard. In doing so, it reveals pink & red vertical lines around all the elements within the object. Each line section has a mini pink or red box with a number at the top corner and what looks like a histogram?What is this information and how do I remove it?
View 2 Replies View Relatedhow do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedIn the example, the red text is along the path (dotted red line). Normally the letters would slant too, but is there a way to keep them vertically oriented while doing text-to-path?
View 6 Replies View RelatedWhy is it sometimes a clipping mask produces jagged lines? I know if there's a dark background and a light one sitting on top of it, then this happens. is there a solution to clearing this out when applying a mask?? You can see in the screenshot I've circled where you see the jagged lines and in the layers palette you can see the clipping mask object.
View 37 Replies View RelatedI would like to have a stencil out of letters, for example "sea" and then underly a picture of waves, so that the waves are only in the letters.
Do I need a special plug-in. How can I put something into its negative (black/white -> White/black)?
More and more often I come across exhibits where the text has a background mask shaped like the letters and numbers, used in the callout. Typically I see this in GIS software based exhibits. Looking for text that can be used in CAD that functions similiarly? Currently working in 2011 Civil 3d.
View 3 Replies View RelatedWhile using the 3D extrude and bevel tool, specifically the isometric preset from the position drop down menu. I am noticing that when I expand the shape (in this case a perfect cube), the vertical paths are not exactly perfect, and are not truly vertical, but off slightly. Is this something that can be fixed or adjusted in the settings, or is this how the tool works?
View 4 Replies View RelatedI have this text on a notepad and I want to make the same design in Corel Draw X6.
I have a few question. Which is the font used there? I tried looking through all the fonts in Corel and noone was the same. Sites like Whatthefont won't answer me correctly because the letters have white line inside.
My second question is this: I need to make the same design, so the white line should be in the letters. How to make that? Is this a font property or do I need to make it by hand? If it isn't a font property, how can I make it?
if i want to make a custom hatch which include with letters and some different types of lines. what is the process to make that type of custom hatches.
View 9 Replies View RelatedWhile creating various circular masks with a radial gradient from white to black, whenever I change the blending mode of the mask path Ai will throw me out of mask mode into layer editing mode. Since this is on a large document of ~2Gb file with multiple artbords for large poster & UI refresh speed is slow, this has become quite frustrating. Is this normal Ai behaviour?
View 3 Replies View RelatedLevel: Newbie OS: Win7 64bit Ia: Cs6
Once I use a Clipping Mask on a layer is the entire document covered in a mask?
And/or is all the artwork from then on inside the mask?
I've read about how to add and how to remove art from a mask. I've read about how to make and release and lots of other things.
So, then I went and found a lesson that contained the use of a Clipping Mask.
I am suppose to Select the main shape and "just" copy it and move it down (doesn't say rather to Paste in front or back but I assumed in back ~ not that it has mattered thus far)
However, while making the main shape I used Gradient Mesh and used an Offset to create a "replica" and so when I go to Select the main shape the mesh is selected and so when I Paste (in back ~ seems most logical) and then move it down the details such as the colors of the Gradient and other such things are visible in front ~ ??
So, I have been trying to abate my problem in lots of different ways.
I have tried using the Pen tool to draw behind the main shape, I've tried making a New Layer and placing it above and below and inbetween the main shape layer, I've tried adding the artwork to the Mask ... I've tried everything I can think of and I've been through many an article in the manual and FAQ's to no avail.
I suppose, what I think I need to know ... is, how ... how on earth do I draw behind this main shape? Am I not able to do it because I am not getting behind the Mask?
I have vertical lines spaced at 1/2 inch in my printed pictures and would like to get rid of them. It happens with Photoshop CS-6 but not with Microsoft Photo Editor. I'm using a HP Officejet 6500A Plus and the color printing is fine.
Additional info: I am using Windows 7 on a Dell. Service pack 1, 32 bit system.
It happens with pdf files, jpeg, and psd. I am managing colors with the printer. I am using best quality printing. I have tried Color Smart and Adobe settings for RGB on the printer dialog page. I have tried telling the printer that I am using HP premium plus, plain paper and Other photo papers (My paper is actually Staples high gloss photo supreme).
What is remarkable to me is that I get high quality prints with the same printer, same paper, same settings using Microsoft Photo Editor - no vertical lines at all. However MPE is not very versatile, and the pdf I am currently trying to print will not load onto MPE.
Is it possible with Xara to create vertical lines in a shape? Think of the white house dome, but from a top down view. I am trying to create some domes in my maps that have an effect much like that. I know with the contour tool I can create a dome with horizontal lines, but is there a way to do it with vertical lines?
View 5 Replies View RelatedI seem to be having an issue with polylines and a few other things like rectangle, they will only draw in up and down movements and not draw to the left or right.
View 4 Replies View RelatedI am looking for a quick way to align vertical pairs of lines that are unequal distance apart and sometimes unequal length so that midpoint between lines are aligned. Right now I draw horizontal lines between each set and use a vertical line from one of these to align the other pairs (red lines on example).
If there is no easy way already incorporated in AC then my thought is a button that will draw lines on a specified layer other than the current layer and in a specified color, and another button to delete everything on that specified layer.
I seem to be having a few issues with Wipeout's and PDF's. When I PDF a drawing that contains a Wipeout, when printed, the Wipeout becomes a mass of vertical lines, and as such has the opposite effect of what I am after.
View 9 Replies View RelatedHow to draw vertical lines at a chosen regular interval/period ? I want to have a vertical line every 4 mm.Without havind to drag and drop a new line from the previous one...
I need about 20 vertical lines spaced of x mm..At the end it should look like a table without the horizontal lines
I am working on a horizontal directional drill with multiple survey points.
The survey points make up (what looks like an upside down dome) and they are all connected with polylines. I need to add straight vertical lines to each point. Of course I can do this manually, but I'm wondering if there's a way to automate it. I've tried Lee's point manager, but it seems the problem is there's no option for xstart, xend, and ystart, yend. I also tried created a block out of a line then importing that on the points with point manager, but I need all of the lines to end at the same position at the top. This doesnt work because as you can see the points aren't all equal from the bottom. I also cannot find a way to trim blocks. I was hoping blocks would have the same xstart and xend, etc. as a line, but they don't.
How can I add a layer of horizontal and vertical guide lines? I can't seem to find that option.
View 2 Replies View RelatedLooking for the process to straighten the lines on an equirectangular panorama I have made with a series of images with a 15mm fisheye lens. I would like to create a true parallel with these files if possible.
View 3 Replies View RelatedI have programs that at some point or another create dimensions for what was drawn. When you have a vertical dimension that doesn't fit between the extension lines, it will either go up and to the right or down and to the left.
I can change it manually by selecting the dimension and then right click and pick Dim Text position > Move with leader.
What I want to know is, is there a way to set the vertical dimension where you want it programatically? I would like to put the vertical dimension down and to the right of the arrows if possible.
I am wondering if it is normal for the lines to be jagged. Vertical and horizontal lines are straight but the angular ones are jagged, Stair step looking whatever you would call it. It makes the stuff I draw look like (edited) .Especially the low angle stuff.
View 9 Replies View RelatedCan we automatically add sample lines at vertical curve points (e.g. BC, EC, Bottom of curve) ?I need to show the sections at these vertical curve key points.
I am using C3D 2011 but could not find that option when creating sample lines in a station range.
I'm working in ACAD 2012. I am at times, unable to draw simple vertical lines in the z-axis. Drawing pluming riser diagrams in 3D. Steps I am taking,
1) Opening the drawing.
2) X referencing a floor plan.
3) Changing the view using the cube to SW Isometric
4) Using the LINE command selecting a point, aligning the cursor with what seems like the Z-axis and entering the distance, heighten enter.
The line drawn is flat. This line can be seen as flat when rotating views. The only solution I have found is to use the "Reset Autocad Settings to Default"
Observations: Sometimes I am able to draw in 3D just fine, but something will happen in the middle of the drawing process that will now only allow me to draw flat. Also was never able to draw polylines in 3D is that how it's supposed to be? Used another computer with the same drawing, at first won't allow me to draw in 3D but after a couple attempts will eventually draw in 3D just fine. Tried starting from a blank template, no luck. Tried changing drawing space to 3D modeling and 3D basics, no luck. Also, when working drawings with existing 3D objects, I am able to snap to vertical point as a start point but cannot snap to a point on any other points on the object that at are at a different elevation.
I want to copy a black and white photo which was printed (old original 'wet' method) on matte paper. When I scan it the scanned image has thin white vertical stripes through all the dark areas of the photo. I have located a method of removing them using Photoshop (using layers etc) but cannot duplicate those 'instructions' using PSP X2.
how I can remove these thin stripes (they make the photo look like everyone one is wearing pin striped clothing).
I guess it does NOT support it because it seems that it does NOT work properly. For example, in case of multiple lines of “Horizontal” setting, it works properly like followings. But in case of multiple lines of “Vertical” setting, it does NOT work properly like followings.
Configure of “Horizontal”:
ABC
DEF
GHI
Configure of “Vertical”:
ABC DEF GHI
In my perspective, it should go downward like followings.
In my “perspective” of Vertical”:
A
B
C
D
E
F
G
H
I
We are making application software for importing DXF file from AutoCAD. If AutoCAD does not support multiple lines of vertical setting on mtex, our software also should not support it, I think. I want to know the specification for multiple lines of vertical setting of AutoCAD.
On my LED monitor (Samsung XL2370), horizontal and veritcal lines display as different hues. Is there an Autocad setting to work with this or is it maybe some setting on my monitor?
View 1 Replies View RelatedWhen I blend layers using multiply, and lower the opacity of the top layer (such as to compensate for too much flash), photoshop puts all these vertical lines on the image. The only time they are not visible is when opacity is set to 0% or 100% for the top layer.
View 2 Replies View RelatedI'm pretty new and have a simple problem that for some reason I can't figure it out! And that is how to make a series of lines on the image that are all perfectly horizontal or perfectly verticle. This will be part of a chart and the lines will be dividers. So the chart will have basically 21 rectangles with 3 rectangles across and 7 rectangles down.
So, I KNOW how to use the straight line tool to make the vertical and horizontal lines but I don't know how to keep the lines perfectly vertical and horizontal and parallel with each other!
"texanandproud"