How to draw vertical lines at a chosen regular interval/period ? I want to have a vertical line every 4 mm.Without havind to drag and drop a new line from the previous one...
I need about 20 vertical lines spaced of x mm..At the end it should look like a table without the horizontal lines
I need do draw perpendicular lines at fixed intervals to a path. The path may be either open or closed. This is used as a symbol on maps to denote a depression with the perpendicular stubs pointing in the direction of the depression. Ideally, I would like the perpendicular lines to draw themselves as I draw the path.
View 4 Replies View RelatedI'm working in ACAD 2012. I am at times, unable to draw simple vertical lines in the z-axis. Drawing pluming riser diagrams in 3D. Steps I am taking,
1) Opening the drawing.
2) X referencing a floor plan.
3) Changing the view using the cube to SW Isometric
4) Using the LINE command selecting a point, aligning the cursor with what seems like the Z-axis and entering the distance, heighten enter.
The line drawn is flat. This line can be seen as flat when rotating views. The only solution I have found is to use the "Reset Autocad Settings to Default"
Observations: Sometimes I am able to draw in 3D just fine, but something will happen in the middle of the drawing process that will now only allow me to draw flat. Also was never able to draw polylines in 3D is that how it's supposed to be? Used another computer with the same drawing, at first won't allow me to draw in 3D but after a couple attempts will eventually draw in 3D just fine. Tried starting from a blank template, no luck. Tried changing drawing space to 3D modeling and 3D basics, no luck. Also, when working drawings with existing 3D objects, I am able to snap to vertical point as a start point but cannot snap to a point on any other points on the object that at are at a different elevation.
I am begineer in autocad. I have to draw plot margin like ractangle having 2 horizontal line and 2 vertical line. on vertical line i want to put letters from A,B----- and on horizontal line 1,2,3,----.
View 8 Replies View Relatedhow do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedHow to make curved lines, slice them into regular rectangles ?
Here is an example :
I did it with the Pen Tool. But it does not look regular at all. I would like to be able to choose the curving angle and the spaces between the small rectangles...
I use Photoshop 7 & do a lot of cleanup of bitmap/tiff images, such a logos & symbols that need cleaning up around the edges etc. Holding the shift down while drawing with a brush in eraser, etc. mode creates a straight horizontal line & that makes cleaning a horizontal edge easy & quick.
Is there any keystroke combinations that will draw a perfectly straight vertical line?
Here is my situation: I want to draw a vertical line on the left-hand side of my workspace about an inch away (to the right) from the left edge. Then I want to fill up that inch-wide column with a particular color. The end result being that I will have an inch-wide bar of color running vertically down the left side of my project.
I know this is probably really easy to do but it's been a long time since I had a course in Photoshop.
I use PSE 6.
Is there a way to draw a perfectly vertical or horizontal line in Xara (Designer Pro 6) without manually lining it up with the grid? Sometimes I just need an instant horizontal or vertical line and I find I have to turn on the grid, zoom right in and meticulously place the pen tool so that the line is a perfect vertical (90 degrees) or horizontal (180 degrees) without slant or lean. Surely there�s a quicker and more reliable method?
View 8 Replies View Relatedi'd like to learn how to draw a simple building with a vertical walled hole next to it.
I already have a ground surface, hole surface, and the grading surfaces for backfilling the sides of the hole and some ramps to get in and out of the hole. The building floor and roof need to slope towards the hole.
I'd like to end up with an isometric view with shaded walls and roof. The only 3d command I have used is presspull and it seemed useful. Is there a thread here that explains the most efficient ways to change views, draw a building, and shade vertical walls.
I am using Civil 3D 2010.
Struggling with an Educational version of 3ds Max 2013, and all of a sudden I can't seem to draw a vertical line (or shape) up the z axis in the perspective view -- I seem to be locked to the x/y plane and am loosing my mind...
View 2 Replies View RelatedI have vertical lines spaced at 1/2 inch in my printed pictures and would like to get rid of them. It happens with Photoshop CS-6 but not with Microsoft Photo Editor. I'm using a HP Officejet 6500A Plus and the color printing is fine.
Additional info: I am using Windows 7 on a Dell. Service pack 1, 32 bit system.
It happens with pdf files, jpeg, and psd. I am managing colors with the printer. I am using best quality printing. I have tried Color Smart and Adobe settings for RGB on the printer dialog page. I have tried telling the printer that I am using HP premium plus, plain paper and Other photo papers (My paper is actually Staples high gloss photo supreme).
What is remarkable to me is that I get high quality prints with the same printer, same paper, same settings using Microsoft Photo Editor - no vertical lines at all. However MPE is not very versatile, and the pdf I am currently trying to print will not load onto MPE.
Looking for the process to straighten the lines on an equirectangular panorama I have made with a series of images with a 15mm fisheye lens. I would like to create a true parallel with these files if possible.
View 3 Replies View RelatedWhen I blend layers using multiply, and lower the opacity of the top layer (such as to compensate for too much flash), photoshop puts all these vertical lines on the image. The only time they are not visible is when opacity is set to 0% or 100% for the top layer.
View 2 Replies View RelatedWhat should I do to “Layer 1” (the single image) to get-rid of those Horizontal and Vertical lines from pattern? While repeating as the Background Image into the HTML page, those Horizontal and Vertical lines does not look nice.
View 5 Replies View RelatedI have the beta installed but I also installed the trial of CS6 on another computer.. Both do the exact same thing with the Adaptive Wide Angle filters. I set a line as straight, mark as vertical (2 lines really) and then process. The lines that are vertical come out wavy... best way to describe it..
I add the 2 control lines to the very outside most windows where the windows meet the brick... This is a closeup of the output... I don't know when straight lines became waveforms.. but they do with this filter!
Is it possible with Xara to create vertical lines in a shape? Think of the white house dome, but from a top down view. I am trying to create some domes in my maps that have an effect much like that. I know with the contour tool I can create a dome with horizontal lines, but is there a way to do it with vertical lines?
View 5 Replies View RelatedI seem to be having an issue with polylines and a few other things like rectangle, they will only draw in up and down movements and not draw to the left or right.
View 4 Replies View RelatedI am looking for a quick way to align vertical pairs of lines that are unequal distance apart and sometimes unequal length so that midpoint between lines are aligned. Right now I draw horizontal lines between each set and use a vertical line from one of these to align the other pairs (red lines on example).
If there is no easy way already incorporated in AC then my thought is a button that will draw lines on a specified layer other than the current layer and in a specified color, and another button to delete everything on that specified layer.
I seem to be having a few issues with Wipeout's and PDF's. When I PDF a drawing that contains a Wipeout, when printed, the Wipeout becomes a mass of vertical lines, and as such has the opposite effect of what I am after.
View 9 Replies View RelatedI have text that I live traced and I am trying to mask vertical lines through the letters. When I do this the text turns white. When I ungroup and do it one at a time only one letter works the others turn white. When I use make a compound path still only one letter will work and the other letters turn white.
I just purchase CS6 and I have not had time to do tutorials and I have a deadline to meet...
In cs 4 how do I draw a curved line?
View 1 Replies View RelatedI am working on a horizontal directional drill with multiple survey points.
The survey points make up (what looks like an upside down dome) and they are all connected with polylines. I need to add straight vertical lines to each point. Of course I can do this manually, but I'm wondering if there's a way to automate it. I've tried Lee's point manager, but it seems the problem is there's no option for xstart, xend, and ystart, yend. I also tried created a block out of a line then importing that on the points with point manager, but I need all of the lines to end at the same position at the top. This doesnt work because as you can see the points aren't all equal from the bottom. I also cannot find a way to trim blocks. I was hoping blocks would have the same xstart and xend, etc. as a line, but they don't.
How can I add a layer of horizontal and vertical guide lines? I can't seem to find that option.
View 2 Replies View RelatedI moved an object I was creating to the artboard. In doing so, it reveals pink & red vertical lines around all the elements within the object. Each line section has a mini pink or red box with a number at the top corner and what looks like a histogram?What is this information and how do I remove it?
View 2 Replies View RelatedWhen I draw a line in photoshop creates a blurry outline around the line that does not occur when I draw the line in Paint. How do I achieve the same solid line in Photoshop?
View 5 Replies View RelatedAnyways; select LINE TOOL, options above are:
Fill Pixels
Line Tool
Weight : 1px
Mode : Normal
Opacity : 100%
Anti-Aliased : No check
Brush Color : Pink
Click on the canvas, hold SHIFT to force a straight line, move towards the bottom of the document, let go of the mouse button, it draws a line straight to my mouse's cursor! I have no other ideas what is causing this.
I have programs that at some point or another create dimensions for what was drawn. When you have a vertical dimension that doesn't fit between the extension lines, it will either go up and to the right or down and to the left.
I can change it manually by selecting the dimension and then right click and pick Dim Text position > Move with leader.
What I want to know is, is there a way to set the vertical dimension where you want it programatically? I would like to put the vertical dimension down and to the right of the arrows if possible.
I am wondering if it is normal for the lines to be jagged. Vertical and horizontal lines are straight but the angular ones are jagged, Stair step looking whatever you would call it. It makes the stuff I draw look like (edited) .Especially the low angle stuff.
View 9 Replies View RelatedCan we automatically add sample lines at vertical curve points (e.g. BC, EC, Bottom of curve) ?I need to show the sections at these vertical curve key points.
I am using C3D 2011 but could not find that option when creating sample lines in a station range.
I want to copy a black and white photo which was printed (old original 'wet' method) on matte paper. When I scan it the scanned image has thin white vertical stripes through all the dark areas of the photo. I have located a method of removing them using Photoshop (using layers etc) but cannot duplicate those 'instructions' using PSP X2.
how I can remove these thin stripes (they make the photo look like everyone one is wearing pin striped clothing).