AutoCad 3D :: How To Draw A Simple Building With Vertical Walled Hole Next To It
Apr 24, 2013
i'd like to learn how to draw a simple building with a vertical walled hole next to it.
I already have a ground surface, hole surface, and the grading surfaces for backfilling the sides of the hole and some ramps to get in and out of the hole. The building floor and roof need to slope towards the hole.
I'd like to end up with an isometric view with shaded walls and roof. The only 3d command I have used is presspull and it seemed useful. Is there a thread here that explains the most efficient ways to change views, draw a building, and shade vertical walls.
I'm working in ACAD 2012. I am at times, unable to draw simple vertical lines in the z-axis. Drawing pluming riser diagrams in 3D. Steps I am taking,
1) Opening the drawing. 2) X referencing a floor plan. 3) Changing the view using the cube to SW Isometric 4) Using the LINE command selecting a point, aligning the cursor with what seems like the Z-axis and entering the distance, heighten enter.
The line drawn is flat. This line can be seen as flat when rotating views. The only solution I have found is to use the "Reset Autocad Settings to Default"
Observations: Sometimes I am able to draw in 3D just fine, but something will happen in the middle of the drawing process that will now only allow me to draw flat. Also was never able to draw polylines in 3D is that how it's supposed to be? Used another computer with the same drawing, at first won't allow me to draw in 3D but after a couple attempts will eventually draw in 3D just fine. Tried starting from a blank template, no luck. Tried changing drawing space to 3D modeling and 3D basics, no luck. Also, when working drawings with existing 3D objects, I am able to snap to vertical point as a start point but cannot snap to a point on any other points on the object that at are at a different elevation.
I'm trying to programmatically toggle a hole between tapped and simple. I found the Tapped property in the object browser but when I try to use it I get a "Method 'Tapped' of object 'HoleFeature' failed" error.
Public Sub setThd(tap As Boolean, doc As PartDocument)Dim hole As HoleFeatureDim holes As HoleFeaturesSet holes = doc.ComponentDefinition.Features.HoleFeaturesFor Each hole In holes If hole.HealthStatus <> kSuppressedHealth Then hole.tapped = tap End IfNextEnd Sub
I am begineer in autocad. I have to draw plot margin like ractangle having 2 horizontal line and 2 vertical line. on vertical line i want to put letters from A,B----- and on horizontal line 1,2,3,----.
Im currently trying to draw a layout for a simple angle iron part using the front, side, and angled view. Its a flat part made of sheetmetal and it will get 1 90* bend in it.
My first question is how do i bend a part in autocad LT 2011? Ive been using autocad for years but ive never had a request for an angled view.
My second question is how would i create a layout using all 3 views and include the info block in the bottom right displaying all the info?
I have adobe CS5 and when I opened my software today, I discovered my swatches were gone from my tool bar. They are not entirely gone because I can get to them from my swatch libraries, however, I cannot drag and drop these swatches into my toolbar in order to click on them. I am trying to use the pen tool to draw a simple shape and the only swatches that come up is the none option (the white box with the red line going through it) and the registration, which I admitadly don't know much about.
I am using a Mac. I cannot figure out how to draw my shapes without a fill and using a black outline.
How to draw vertical lines at a chosen regular interval/period ? I want to have a vertical line every 4 mm.Without havind to drag and drop a new line from the previous one...
I need about 20 vertical lines spaced of x mm..At the end it should look like a table without the horizontal lines
Is there a way to draw a perfectly vertical or horizontal line in Xara (Designer Pro 6) without manually lining it up with the grid? Sometimes I just need an instant horizontal or vertical line and I find I have to turn on the grid, zoom right in and meticulously place the pen tool so that the line is a perfect vertical (90 degrees) or horizontal (180 degrees) without slant or lean. Surely there�s a quicker and more reliable method?
Struggling with an Educational version of 3ds Max 2013, and all of a sudden I can't seem to draw a vertical line (or shape) up the z axis in the perspective view -- I seem to be locked to the x/y plane and am loosing my mind...
I use Photoshop 7 & do a lot of cleanup of bitmap/tiff images, such a logos & symbols that need cleaning up around the edges etc. Holding the shift down while drawing with a brush in eraser, etc. mode creates a straight horizontal line & that makes cleaning a horizontal edge easy & quick.
Is there any keystroke combinations that will draw a perfectly straight vertical line?
Here is my situation: I want to draw a vertical line on the left-hand side of my workspace about an inch away (to the right) from the left edge. Then I want to fill up that inch-wide column with a particular color. The end result being that I will have an inch-wide bar of color running vertically down the left side of my project.
I know this is probably really easy to do but it's been a long time since I had a course in Photoshop.
recently i got a new workstation at work, and i am puzzled with one problem. I made a clean installation of Max, ran it, and started to work, but for some reason, my material thumbnail shows refraction of A&D material as thin walled even when it is set to solid.
I tried to uninstall max, wipe max directory and user folders in Appdata/Local/Autodesk, reinstall everything again
I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
I would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
I have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
Illustrator keeps freezing when applying an effect such as texture-grain to a simple gradient, or even rasterizing a simple black circle. My system is about a 6month old macbook pro with 16gb ram, i7 and AMD Radeon HD 6770M 1024 MB. What could be causing this? It wasn't like this when i first started using the laptop but has started to do it everytime i try and do any of those simple tasks recently.
I have been using Elements 8 for some time and recently purchased an ASUS monitor that is at home in both vertical and horizontal modes. Can I change the Elements 8 format to work in a vertical format to accommodate the larger size possible with a vertical image. It is difficult to manipulate the functions in Elements when the mouse is working in a horizontal mode and you are viewing a large image in a vertical format. If the format of the Elements 8 software can be changes to vertical, any protocol (directions) to accomplish this?
While using the 3D extrude and bevel tool, specifically the isometric preset from the position drop down menu. I am noticing that when I expand the shape (in this case a perfect cube), the vertical paths are not exactly perfect, and are not truly vertical, but off slightly. Is this something that can be fixed or adjusted in the settings, or is this how the tool works?
I only just got photoshop yesterday and I barely know a thing but I have got an image with 3 layers and I want to make it into a simple animation, displaying each layer in turn.
I choose the vertical type tool or the vertical type on a path tool or the vertical area type tool...and all I get are letters that are rotated 90 degrees clockwise that go down in a vertical line. The effect is the same as if I took one of these lines that I am typeing here and rotated the entire line 90 degrees clockwise. That is not the effect I want. I am tying to get vertical letters stacked on top of one another in a line going vertical. I watched videos and they simply pick the tool and it functions this way, but when I pick the same tool I do not get this vertical orientation of the individual letters, but the 90 degree rotated letter.
When looking at architect CAD drawings in magazines I notice that they use figures, trees, cars, etc. to add scale to the building. I'd like to be able to do the same.
Is it possible to import similar images into AutoCad 2014?
One other question: if I'm drawing a house plan and I have specified the wall thickness by drawing 2 lines to represent the outer and inner boundary, how do I 'fill' the thickness of the wall; as opposed to just leaving it white/empty?
I have managed to create a 2 storey house complete with roof (i.e ground floor, 1st floor and roof).
I have got them all setup in the project navigator under constructs. I can view all three of these layers in 3D by changing the popdown in the view/popdown option but i can't see the 'full' house. i.e. as if i was looking down on the full house from above at an angle and can see the ground floor, 1st floor and roof all at once. I've seen examples in the main page under 'pctures of the week' so i know it can be done.
how to create a rear elevation or side view type drawing (how to do it so i can show someone, so i don't have a full grasp of the names of architectural plans).
I am trying to bild a ramp in 3d but i've been trying with no success, the ramp have a non common shape. pls look at the acad file to take a loot at the shape.
I need to have the top part at 5531mm and the bottom part at 0 and there is another part which is at 5035mm you can see that in the drrong and the ramp must 100mm thick or something similar. also i need to do it as a solid becouse i need to export it on a different software which only ecrpts solids.
