Anyways; select LINE TOOL, options above are:
Fill Pixels
Line Tool
Weight : 1px
Mode : Normal
Opacity : 100%
Anti-Aliased : No check
Brush Color : Pink
Click on the canvas, hold SHIFT to force a straight line, move towards the bottom of the document, let go of the mouse button, it draws a line straight to my mouse's cursor! I have no other ideas what is causing this.
Version: Autocad 2013
I have a problem drawing straight lines. Normally, like everyone, I will start from any given point and the line i wish to draw will snap to 0, 90 or 180 degrees. However there is now no snapping and no straight lines.
I have tried resetting SNAPANG to 0 (it is already set to 0) and this works for maybe the next 3 lines but then I am back to square one and cannot draw a straight line without constantly having to reset SNAPANG.
I've tried resetting USC to world. I've also tried changing PLAN to view and world.
I have received some electrical drawings that i'm making some alterations to. When i try to draw a line between fittings it just disappears. I'm not very experienced with auto cad and only really use it to alter drawings for final designs.
View 4 Replies View RelatedI have a student who is using AutoCAD 2010 and has Ortho set to on and for some reason it does not draw straight horizontal or vertical lines. They are off by about 5 degrees.
View 9 Replies View RelatedI assume there's some button combination I'm missing? All I know is I can connect a series of freehand lines no problem, but the straight line tool is not consistent operation with the freehand tool.
View 4 Replies View RelatedI'm suffering to draw a circle connect with a arc and 2 straight lines for almost an hour ago.
View 9 Replies View RelatedI want to take a color wheel and draw straight lines on top of it, and using the blending tool or some other tool, I'd want to be able to have those lines take on the colors from the color wheel underneath. Is there a way to do this, or a way to do something like it?
View 4 Replies View RelatedIs there a way to make a object with straight lines to change the straight line to be undulated like a curly.
View 14 Replies View Relatedhow do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedHow do you draw a straight line?
View 3 Replies View RelatedIf i wanted to draw a straight line with a color, much in the way you would traditionally with the edge of a rule, with the paintbrush or pencil tool, how would i do this? The pen tool creates paths. i do not want this. i just want to draw or paint a straight line.
View 4 Replies View RelatedFor some reason, GIMP is putting straight lines off of any line I draw (paintbrush, ink or pencil) and while it's pretty cool, I'd like to be able to draw properly.
View 8 Replies View RelatedI am trying to use the line shape tool. However, the shape stroke type affects the arrows. Does it mean that I have to draw the line first, without the arrows, and then add the solid arrows to the line
View 3 Replies View RelatedI decided to draw a long box, 2 pixels wide and fill it with the desired color. That was all fair and well until I tried reducing my image and then the nice looking spider web line that I drew turned into a horrible black and white block line that looks crap.
So, I decided to try and get rid of it, and here I am 45 minutes later still trying to get rid of it. I don't what layer it is on, there are many layers, whenever i find the layer it is and delete it it then turns up in another layer in a different color. I've tried copying and pasting over layers, it just keeps coming back, I don't know what is going on anymore, it wont go away....
How to draw a simple freaking straight line in GIMP by clicking on a point and then clicking on another point?
How do I draw a straight line in GIMP? I'm guessing all those tutorials are aimed at windows users. But I use Debian. Also tried ctrl, alt etc.
I have to wonder what kind of reasoning went into deciding not to have a line tool. It seems so simple to implement compared to all that advanced stuff. The only decent way to make a line currently that I can see is to make a square by filling a selection, shrinking, deleting, then delete all the sides of the square that i don't want. But this is so inefficient to do every time I need a line.
I use Photoshop 7 & do a lot of cleanup of bitmap/tiff images, such a logos & symbols that need cleaning up around the edges etc. Holding the shift down while drawing with a brush in eraser, etc. mode creates a straight horizontal line & that makes cleaning a horizontal edge easy & quick.
Is there any keystroke combinations that will draw a perfectly straight vertical line?
In both model and paper space, rectangles with corners filleted look fine. However, the filleted curved corners are not joined with straight lines once it's exported/plotted to PDF. I have to zoom in very closely to see this, so it won't be a big problem for actual printing. But I can't figure out why the lines are broken on PDF when they are well joined in both model and paper space.
I tried changing PDF quality, plot style, and anything I can think of, but to no avail.
Autocad 2012 on MAC, 10.7.2 with Acrobat X.
I've been using PSP 7 for many years and over the last year or so I can't seem to get a straight line to show up using the Draw Tool (I think the kids may have messed with a setting).
In the Tool Options I select Single Line, a width of 4, solid line and anti-alias. Create as vector and close path are left unchecked.
The problem is that whether I use my left or right mouse button to drag the line, the line does not show up, it just disappears (I'm using colors different from the background, of course).
I can draw a straight line. Then I'd like to bend the line. How do I do it?
View 3 Replies View RelatedI am trying to draw a straight line using the line tool, but when I hold down the shift button to draw a straight horizontal line it draws it a an angle. vertical line will go straights, but not the horizontal. I also noticed that the cursor now has an has a horizontal arrow with a vertical line at the end of it in the bottom right corner of the cursor when the line tool or shape tool is used. I went into prefrences and checked the constrain angle but it is set at 0 so I am not sure what to do or what happened. It was working fine and then all of a sudden this happened. Is there a button I may have hit that would cause this? how do I get it to draw straight lines again? I just noticed it wont draw 45 degree angles either. it sticks to angles a few degrees above and below horizontal.
View 2 Replies View RelatedUsing Photo & Graphics Designer 6, can I draw a straight line between two pre-determined points, eg. X=0, Y=0 to X=100, Y==0?
View 5 Replies View RelatedThe hot key to draw a straight line in a mask? I'm wanting to create a gMask for a letterbox matte but can't remember what the hot key is to keep the line straight or 90 degree.
View 1 Replies View RelatedWhen in Orthographic view and in back, left, right, top, bottom, front view, I cannot draw an object as Cube by example. To be able to make the object I have to move a little bit my view .
Example. If I was in Ortho - Back view, I move the view a bit so it is not perfectly on the back view than it allowed me to draw object. Another way is to change to Perspective view.
why I cannot make object on straight orthographic view?
I think this features is on a programas like painshop and similars, but I can't find it on photoshop, I want to do geometrical shapes using the pencil tool with soft edges.
View 7 Replies View RelatedTotal buffoon when it comes to getting GIMP to do what I want to do. I'm just practicing with making maps, black lines on a white background, and I've run into some issues I'm wondering if I can get rectified.
1) For whatever reason, the line weight of everything has shifted throughout the file, ending with some lines lighter and grayer than others. Is there a way I can get GIMP to trace all the lines in a uniform black, with uniform thickness?
2) I have tried locking the white background, but often when I select and move my black lines, if I don't click in just the right spot it moves the white background instead, which is really, reeeaaaly aggravating. How Do I get that background to be completely untouchable?
3) In trying to colour the image, I've run into problems with their being a white outline between the colour and the black lines. I think I need to sharpen the image or somesuch? How can one correct this issue?
4) Is there anyway to convert the black dotted lines of the paths tools into straight black lines, in regards to an older file? If not, is there an easy way to trace them?
5) I find the scale too tends to make my image too jagged. I want to take a section of my map, move it too another file and enlarge it to do detail work - what's the best way to do this in order to have a clear image?
6) Any way to translate an image from a MErcator Projection ot a Winkell-Trippel projection, one that works on a Mac?
sometimes Photoshop (Intuos 4, AMD Phenom2 X6 1100T@3.333GHz) draws a hard line at full pressure instead of a soft, dynamic curve. It simply connects the starting and ending point. Painting ia 20000x14000@16GB Ram with PS using 12GB, painting size 6GB.
I also experienced when going back history states with ctrl-alt-z the tool automatically switches to zoom, and sometimes history just jumps back to the latest state.
I hooked up a VisTablet drawing tablet and am using Photoshop CS2. With the mouse, I can draw curves, zigzags, whatever, but with the pen, I only get straight lines. Is there an option or a preference that makes this do this? How can I undo it if there is one?
View 1 Replies View RelatedCan a Lightroom adjustment brush draw a straight line by clicking the start and stop points?
View 8 Replies View RelatedI shot an interior. How do I get the lines of a room straight? I used the straighten tool in the cropping area but one side get straight and the other is off.
View 16 Replies View RelatedIs it possible to warp a Smart Objects using corners and straight lines in stead of curves? I try to make a map icon in which you can easily replace the image on the map. I know how to do this warp with paths by adding anchors, but it won't work with a Smart Object (or a simple image for that matter)
It should look like the right image:
If I try to do it by splitting the image and transform them like on the left image, the transition between the 'panels' isn't correct.
I'm linking CAD files. The lines come in jagged. I think it is more of a graphics problem.
View 1 Replies View Related