I would like to have a stencil out of letters, for example "sea" and then underly a picture of waves, so that the waves are only in the letters.
Do I need a special plug-in. How can I put something into its negative (black/white -> White/black)?
I'm trying to do a black stencil over a photo. To do a black layer is easy. To do transparent shapes in that layer thus creating a stencil is easy as well. But here is my challenge...
Creating Letter Stencils. See-through transparent letters, so the picture is seen only through the letters... I don't seem to be able to choose Transparent Letters to write on the black canvas.
More and more often I come across exhibits where the text has a background mask shaped like the letters and numbers, used in the callout. Typically I see this in GIS software based exhibits. Looking for text that can be used in CAD that functions similiarly? Currently working in 2011 Civil 3d.
View 3 Replies View RelatedAbout a month ago I created a text using some font (font name is irrelevant, as this problem applies to other fonts as well) and then I saved the file, with white background, as png. Today I'm trying to do exact same thing with with exact same font, but somehow letters look different (a little bit). I'm using the same "text antialiasing" setting (hard), obviously same font size, document has same dpi. Month ago letters looked nice, for example "o" was symmetrical, now it isn't and it looks worse, but most important - different.
I haven't changed anything, haven't installed any updates etc. There's a difference, so something must have been changed, but what. I'm using Win7 64-bit and PHOTO-PAINT X6.
Below is a screenshot of something that sometimes happens when using the Mask Transform tool in Photo-Paint X5 (Home & Student). It only does it when dragging the mask from the right. Is this a known phenomenon? Can anything be tried to overcome it? I wondered it might be anything to do with graphics card compatibility ..or just my computer in some other respect.
Windows 7 Home Premium 64-bit - ATI Radeon HD 3800 - 4GB RAM
I think circle after reduce using mask should stay circle instead of you can get in photopaint.
Steps:
1. make 10px circle
2. make mask from it
3. reduce mask by 3px
4. crop object to mask
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
How to create a luminosity mask in Photo paint?I know there was a macro but the site is in Russian and I'm not so good in that to read the instructions.
View 13 Replies View RelatedWhy Corel Photopaint X5 dose not have lasoo Mask Tool (endless /connected) like magnatic mask tool (one end ) or Adobe Photoshop lasoo tool?
In my earlier post i quote Corel Photopaint 5 instead of Corel Photopaint X5
Does Perfect Mask 5.2 works as a plugin in PhotoPaint X6?
View 4 Replies View RelatedIf I'm using the color mask and i want to know the luminosity of an image can I use it for Luminosity mask?the reason is PP does not have something as Photoshop.
View 12 Replies View RelatedCorel Photo Paint X4.
I have an object with a clip mask.I post a new object.
How do I drag the clip mask existing in the new object?
I tried to drag with the mouse, but it closes the program.
I am creating a mask in Photo Paint and feathering the edges. Everything works fine up until I "Finish Editing" and the object is returned to Corel Draw. The mask has shifted up from the image and the wrong area is masked. If I save the image from Photo Paint and re-open it it's fine...just not when it's sent back to Corel Draw.
View 5 Replies View RelatedThe image below has been touched up (i have cleaned up the lines with the "line/curve tool"), and even redrawn some lines.As you can see, the background is white. How to use the background (all the white) as a "stencil". this way i can use a bold brush to "airbrush" some shading and shadows onto her body, without having to worry about it spraying outside of the lines. i know it can be done, i have done it myself in fact, i just can't remember how. I have the plug-in called "isolate lineart", just FYI.
View 1 Replies View RelatedIm wanting to create a multi-layered airbrush stencil from a photo of a pin-up. How do I do this?
View 1 Replies View Relatedi have been trying to figure out how they do the spray stencil effect on a couple of the team invasion mixtapes and also i seen other places...
View 1 Replies View RelatedI must have fat fingered something and I now when I click on the Eraser Tool or the Brush Mask Tool instead of getting a circle or square, I get and icon of the tool instead. They still work but they're harder to use without seeing the circle or square depending on what's selected. I've been using Corel for many years and never had this happen and I can't figure out how to switch back.
View 3 Replies View RelatedI have text that I live traced and I am trying to mask vertical lines through the letters. When I do this the text turns white. When I ungroup and do it one at a time only one letter works the others turn white. When I use make a compound path still only one letter will work and the other letters turn white.
I just purchase CS6 and I have not had time to do tutorials and I have a deadline to meet...
making a spray paint/stencil look on one of my photos,
I want to have the spray paint look messy with the spray paint overlapping the edge of the stencil, and I want to have add some paint drool to make it look realistic.
Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies View Relatedthe size of the brush at the Brush Mask Tool can not be changed when I pressing the Shiftbutton
X6.4 - Win7
1. After creating a clip mask can I view it without the actual object also being visible?
2. Can I paste one object into the clip mask of a different object?
how to manipulate the size of the wipeout for a text mask.
Simply selecting the masked text in C3D 2011 provided pick boxes at the four corners of the wipeout, making it very easy to manipulate the size of the wipeout box. I'm hoping to do the same in C3D 2012, but the wipeout seems to be treated like a block and lacks the pick boxes.A system variable maybe?
I want to make a Christmas present spelling out the last name using individual photos of letters (see below). I would like the finished image to be 16x20, and I am going to upload it and have it printed at a photo developing shop. I'm not sure how to set this up in GIMP.
When I set up my new file, how many pixels should I make the new image, if my desired size is 16x20. I'm not sure how many dpi to use when I convert the inches to pixels. I read that 300 dpi is desired.
I was thinking about making image boxes for each letter in one layer and cutting and pasting each letter into the boxes. Is this possible or do I need to make a new layer for each photo?
I have an image menu on [URL] like say the "Home" button. How do I edit that text or find the font and size of the text? T
View 5 Replies View RelatedI'm all thumbs when it comes to photo editing. I have a simple question and I'm not sure how to phrase it.
I have d/l a photo, and used Paint.NET to place text onto the photo. So far so good.
Is there a way (or a particular file format) that will allow me to go back, after the photo has been saved, and edit (delete or move) the text that I have already entered onto the photo? I tried with JPG and PNG, and after saving the photo with text on it, I was unable to delete or move it.
Is there any way I can work it so that I can edit text, that has already been saved? I have attached a copy of the photo here--to get it under the 256K limit, I had to shrink it.
Attached Thumbnails
Making early steps in Photoshop, my little sister put a lettering over a photo, worked with filters,etc, and then properly flattened image and saved it as jpg.
All looks nice but she did it on the original instead of working with a copy . As a result , the photo, which is important for the family archive, now has this lettering all over and we don't know how to clean it up.
The letters are semi transparent with no sharp edges, the photo underneath is partly visible.
I 've tried to select letters and do something with filters, but the parts of the photo visible under the letters, are with different texture and colours and and I've achieved nothing - the letters are almost impossible to select properly. Even when selected more or less properly and treated with filters/layer transparency/etc they are still clearly visible, only their colour and saturation changes...
Tried everything within my limited Photoshop skills incl, trying to find any History palette which to use to reverse all lettering done over the photo but History was not saved.
It is a digital photo,so, there is no film to scan and have a clean original...
Could someone with Photoshop skills better than mine, please, tell me how to remove this text from the photo - it is an important part of our family photo archive and I'm desperate to restore it to the original condition.
I have Photoshop 5.5
I am using Corel for driving a fiber laser through a dedicated Net connection not available to the rest of the network and it and my computer are right next to the switch.
My problem is that when I send a job from the PC to the laser it works fine. If I make a small change on the graphics, I save it and send a new job to the laser. Quite often, some part of my grapics is left off the plot even though I didn't touch that graphic or mod it. So I send the job over again and now somewhere else is missing some of the graphic word...usually a word or a letter or number. I usually turn off the computer or get out of Corel and come back in and it is fixed. That doesn't sound like a network dropped or corrupted graphic. I have tried turning off the laser with Corel still up and it doesn't fix the problem when I bring the laser on line again.
I just want to be able to add text to a photo. I follow the steps, choosing 12pt, but when I try to type on the photo, I can tell something is trying to show up on the photo, but it is so tiny, it is not visible.
View 4 Replies View RelatedI have a scanned guest pass that is 2 color. The pass is in jpg format. although i can put it in any format necessary.
I need to change the "800" numbers on the pass. To the new number.
is it possible to remove them( numbers) and replace them, while keeping the background of the pass the same. if that make sense. I have Corel 6.
How do I change the color of the text when I want to write on a photo?
View 3 Replies View Related1.jpg
I have a weird problem with underlining my text while having anti-aliasing off. (Photo-paint X3, version 13.0.0.739)
When I have a large block of text and the underlined word is in the middle, the underline is displaying correctly as 1px line with a 1px space from the baseline. But when the text is either at the end or alone, it looks like there is a 2px underline without any vertical space at all.
See the image attached for clarity.
Font: Arial, size: 12pt, anti-alias off
It happens on two different computers, one with Windows 7 32-bit and one with Windows XP 32-bit.