Paint.NET :: Layers Of Text On Photo
Feb 7, 2013
I'm all thumbs when it comes to photo editing. I have a simple question and I'm not sure how to phrase it.
I have d/l a photo, and used Paint.NET to place text onto the photo. So far so good.
Is there a way (or a particular file format) that will allow me to go back, after the photo has been saved, and edit (delete or move) the text that I have already entered onto the photo? I tried with JPG and PNG, and after saving the photo with text on it, I was unable to delete or move it.
Is there any way I can work it so that I can edit text, that has already been saved? I have attached a copy of the photo here--to get it under the 256K limit, I had to shrink it.
Attached Thumbnails
View 11 Replies
ADVERTISEMENT
Apr 23, 2011
I have a web design comp in Photo-Paint X5 with all of my layers nice and organized, and some are hidden. If I edit a text layer, upon exiting the edit all of my hidden layers reappear, but only within a "group". It's very annoying to have to go back and hide all of those layers again.
View 9 Replies
View Related
Jun 4, 2011
Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies
View Related
Jun 18, 2012
I need to use a template photo and onto that one add two more photos, by adding two more layers.
Then I need to delete the original (background) one, which would be the template.
However when I delete it, the entire picture gets deleted, i.e. also the photos I pasted on top of it.
How can I avoid that?
Additional information:
Very strangely when adding a new layer, though in the layer screen it shows that I am adding them,
when I paste the first photo onto the background, it then becomes the background image, rather than layer number 2.
View 2 Replies
View Related
Nov 4, 2013
Adding layers to a chosen background I find that the pictures I have chosen to add, whilst looking ok in My Pictures are way to small in the layers pallet, If I try to enlarge them to fit they just go out of focus and pixelate?. something tells me they should all be the same file size how can I convert them, and is this the answer?.
View 4 Replies
View Related
Oct 12, 2011
I have an image menu on [URL] like say the "Home" button. How do I edit that text or find the font and size of the text? T
View 5 Replies
View Related
Jan 25, 2012
I just want to be able to add text to a photo. I follow the steps, choosing 12pt, but when I try to type on the photo, I can tell something is trying to show up on the photo, but it is so tiny, it is not visible.
View 4 Replies
View Related
Mar 10, 2009
I have a scanned guest pass that is 2 color. The pass is in jpg format. although i can put it in any format necessary.
I need to change the "800" numbers on the pass. To the new number.
is it possible to remove them( numbers) and replace them, while keeping the background of the pass the same. if that make sense. I have Corel 6.
View 9 Replies
View Related
Jun 11, 2011
I would like to have a stencil out of letters, for example "sea" and then underly a picture of waves, so that the waves are only in the letters.
Do I need a special plug-in. How can I put something into its negative (black/white -> White/black)?
View 1 Replies
View Related
Aug 29, 2013
How do I change the color of the text when I want to write on a photo?
View 3 Replies
View Related
Sep 14, 2011
1.jpg
I have a weird problem with underlining my text while having anti-aliasing off. (Photo-paint X3, version 13.0.0.739)
When I have a large block of text and the underlined word is in the middle, the underline is displaying correctly as 1px line with a 1px space from the baseline. But when the text is either at the end or alone, it looks like there is a 2px underline without any vertical space at all.
See the image attached for clarity.
Font: Arial, size: 12pt, anti-alias off
It happens on two different computers, one with Windows 7 32-bit and one with Windows XP 32-bit.
View 1 Replies
View Related
Feb 28, 2013
I've just started using X4 for the first time and what I'm trying to do is add text to the last frame of a gif. I got the text in and see where the colour changing tools are but for some reason even if I made everything red, the text colour still comes out completely different. It seems to be matching it to the colour scheme of the GIF itself. I just want to text to be red.
How do I get the text colour to just stay red?
View 2 Replies
View Related
Dec 9, 2011
I don't often work with paragraph text, but I'm creating a booklet of about 32 pages. When I paste my text into Draw, it automatically creates as many pages as are necessary to display all of it. But when I change text borders or enlarge the font, it doesn't add any more pages. If I manually add pages, the text doesn't continue to them. All the original text is still there, but the excess is hidden within the border on the last page. I can manually add pages, of course, and cut and paste my text from one page to the next as necessary, but is there a way to automatically continue the text onto new pages?
View 3 Replies
View Related
Apr 17, 2012
How can i add a paragraph text inside an object with photo paint x4?
View 4 Replies
View Related
Jun 16, 2012
When I'm saving my file as PSD I have strange error with "nice" description.The only way to avoid it is search and delete design elements - I found that its caused by one text object.
The question is what can be wrong with text object to generate this error. I can edit text and do everything with it but I cant save it as PSD. Its hard to find it in big complicated designs. I think similiar problem was in Corel Photopaint X3. Seems like it left to X6 version.Bug exists in all files with text objects.
system configuration:Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version: X6 VERSION: 16.4.0.1280
View 14 Replies
View Related
Jan 27, 2013
I've been using Paint.net for a few years, but only with .jpg photos. I recently scanned some text as a .jpg and cannot figure out how to correct some spelling errors.
Also, the paper I scanned was far removed from the original, so the white blank areas are full of black artifacts. Is there some way to have Paint.net recognize the actual test so I can have a clean text copy?
View 5 Replies
View Related
Jun 10, 2012
I've been doing some group photos for my work and would like to overlay our logo and text, but be able to use it again for other shots and change the text when needed. Something like class photos where all I would change would be the text.
Can I create a transparent PSP image that can then be overlaid any future photos?
View 3 Replies
View Related
Nov 13, 2012
After creating text in Draw X6, I can't drop it into Photo-Paint without it appearing to be improperly cropped; i.e., some outer edges of letters appear to be cut off (see example below). Converting the text to curves does not solve the issue.
Strangely, I have no problem if I copy the same text from Draw X5 - the results are excellent.
View 9 Replies
View Related
Dec 29, 2008
I am trying to get a white layer with see through writing which reveals the background image underneath. (Almost like I have put a stencil over a photograph). I have discovered this is called a clipping mask.
However, I am having difficulty using a clipping mask over multiple text layers. It seems to only do it to one layer directly beneath. I do not want to merge the text layers as I want to mess about with the design a fair bit.
View 4 Replies
View Related
Mar 31, 2013
My text was working fine til today, now when I try typing text, it is showing as a blank box, until I click outside of it, then it shows as a blue dotted line on the text. Then when I send it to the laser, it is not there!( laser engraver or the printer). I just want the text to be normal, like it was 2 days ago! Before, I could click anywhere, type, and it showed up with no problems!
View 7 Replies
View Related
Nov 18, 2013
I often will borrow groups and layers from one document and drag them into a new or a different PS document to borrow the layers and formatting so I am not starting over from scratch with a design that I just need to re-work into a different size.
But in the last two weeks, when I drag the layers over, they start mysteriously changing into other layers that I did not drag over. What is causing this bug? It wasn't there before as I have performed this action many times in various projects. I am using PS CS6 on a Mac Book Pro.
View 1 Replies
View Related
May 11, 2013
removing a background from a photo.
For example, remove the grass from this photo:
Make it look like this:
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
View 3 Replies
View Related
Sep 30, 2011
I want to know how to resize a photo without loosing quality....... in the image resize box the is a check box that says maintain file size ......what does that do .
I have tried to resize using it and the file stays the same as the original.
View 14 Replies
View Related
May 8, 2012
I haven't found a way to turn a color photo into a Black & White outline drawing in Corel PhotoPaint X5.
View 11 Replies
View Related
Feb 1, 2012
I am trying to change the background of a photo. Not just change the color but change the color AND make it keep it's original shading, etc. I have some family photos we had made recently and they used a beige color draping for the background. The ones we had made before had a black draping. I was wondering how I could go about using some sort of additive coloring to transform the varying shades of beige to the same varying shades of black.
I have already used the masking tool to separate the background from the rest of the photo.
View 3 Replies
View Related
Sep 10, 2012
I have two photos, shooted probably the same day, by the same photograph in the same place !But the pose is a bit different.
first one is in high resolution and in black & white nuance. second one is a small resolution and in full colors. I wish re-color the black&white photo using exactly the same nuance from the colored one.
can i "copy" all the colors from the color-one to the b&w one ?
here are the photos :
the black and white to recolor [URL].......
the source color to use
View 14 Replies
View Related
Sep 27, 2011
I want to create bulging eyes in a photo that i have. I would do this in photo paint?
View 10 Replies
View Related
May 6, 2012
In a photo, I cut out an elliptical or round face.I saved the cutt image as .; "New from clipboard" No problem, the background is now transparent.
But now I want to make the edges of the oval or round image transparent.(then I want to put the result image on another image)
How can I make the edges transparent with Corel Photo Paint (or Corel Draw)?
View 9 Replies
View Related
Aug 12, 2013
We use AutoCad to name our dxf files for our Burn Table and whenever we get a new part it is a repetitive task to input layers and common text. So what I am curious is can AutoCAD input the layers and text automatically using a Macro?
I want the Macro to put in 6 layers and choose the layer color and title then input text boxes with word in 3 different layers. There will be about a total of 10 different text boxes with text already put in the boxes by the Macro.
View 6 Replies
View Related
May 9, 2013
I would like to increase the font size in many text layers at a time by selecting them in the layers panel. The font increases, but the text boxes don't expand to fit the increased size text. So I am having to make each box bigger manually. Is there a way to have the boxes expand to fit bigger text automatically through the layers panel?
View 2 Replies
View Related
Jan 4, 2012
Is there an easy way to do color tints on a photo in PhotoPAINT? And by that I don't mean just correcting the tint, I mean converting a regular photo into one that has a single color tint (e.g., yellow, red, etc.). I've tried graying it out and then adding a transparent color layer over it, but I'm not getting the result I'm looking for.
Also, while I'm at it, are there any (current) books out that cover PhotoPAINT in depth? I know that the official DRAW book has a section on it, but it's pretty basic.
View 4 Replies
View Related
