After creating text in Draw X6, I can't drop it into Photo-Paint without it appearing to be improperly cropped; i.e., some outer edges of letters appear to be cut off (see example below). Converting the text to curves does not solve the issue.
Strangely, I have no problem if I copy the same text from Draw X5 - the results are excellent.
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I have been working with both Corel Draw 12 and and at some point Photo Paint just froze. Empty main area, just one docker opened. Doesn't matter where I click on the screen, the same metallic clicking response. I uninstalled the whole suite and installed it again.
No difference, the same screen starts and the same freeze. I can only close it using Task Manager. Corel Draw works find and Photo Paint works fine on the other computer on which I installed it at the same time.
Every time I double click on a bitmap in Corel Draw, it opens up Photo Paint. How can I disable this option? I never use it and its a waste of my time because it takes too long to load up! I don't know if my mouse has a problem, but sometimes I can just click once on a bitmap and it triggers the photo paint to open.
View 7 Replies View RelatedPhoto paint uses an absurd amount of CPU when drawing a line; the brush "lags" and stutters about the screen, too. My system CPU is a Core i7-2600k, and all 8 threads are maxed during the drawing of the line. Why would this be?
Screenshot: [URL]......
When I copy and paste a pdf document into Corel Draw, it seems as the default size of the pasted object reflects anywhere from 23" (left to right) & 17" (top to bottom) = 23"x17". After selecting the object, & entering an object size of 8" x 11", the document then resizes to 2"x3". So, then I always have to enter the 8"x11" again for it to finally accept that size - which it always does, but on the 2nd time trying.
View 15 Replies View RelatedHow to make text transparent when added on top of a photo?
View 3 Replies View Relatedhow to take a jpg or gif file and change the colors of the image? I am having difficultly doing so. It is our company logo which is in 2 colors and I merely want to change it to white.
View 9 Replies View RelatedEvery since I updated CDx6, Photo-Paint no longer allows for drawing or erasing in a straight line by clicking, pressing the alt key and clicking again. Instead a scale comes up that changes the brush opacity...What happened? I can't figure out what happened. See attached file. The red arrow indicates what comes up when alt is pressed.
View 5 Replies View RelatedI downloaded Corel 15 trial verson but decided not to purchase. After trial I uninstalled the trial. Now when I use my pre-installed Corel 13 when I try to edit bitmap within Corel draw it open Windows 7 paint instead of Corel 13 Photo Paint. I tried doing a re-install REPAIR but I am having same issue.
View 6 Replies View RelatedWe upgraded to x6.1 and are having some issues. I have X5 and X6 installed on my machine. When using X6 and you add a new page to the document, then publish a PDF. The PDF will show grid lines on the new pages. This happens with new docs and previously created docs when we add new pages. Also, on the new pages, you can't disable the printing in the object manager.
Second problem, when you have a bitmap in your document and click on it, Photo Paint is available. Only the trace option. Edit Bitmap is grayed out on the Property Bar and not available when you right click the image. I have to open Photo Paint and copy the image into it. There are three of us having the same problems.
System
Win 7 Pro 64-bit SP1Platform version:6.1Platform build number:7601Platform info:Service Pack 1
When I do screenshots and copy them into Photo PAINT, PP seems to shade the colors. Why is this happening?
How can I switch off this behavior?
Here's an example of what's happening when I do a screenshot of a screenshot of a screenshot of a screenshot of a Photo PAINT desktop, always overlaying the same original empty image window upon the current screenshot step:
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I don't know if this is just a Windows 8 compatibility issue, but when I save an edited photo it is stored in whatever orientation I opened it. Also the thumbnails only show the original imported image, not the edited image.
For instance if I took a picture in a sideways orientation on my smart phone then opened it in PPX5 I can rotate, edit and save and it will show the original image in a sideways orientation. If I post the image on Facebook it will show up sideways. If I put it on a forum it may look okay but people with iPads and iPhones see it sideways.
My corel x4 was coryupt and I had to install my older Corel 12.
Options on this corel are different. So in Corel 12, how do i change the settings so that when I double click on an image, it will open it in Corel photo for editing?
using CorelDraw 5 with Parallels 7 on a MacBookPro to access Windows 7 and CorelDraw X5 -
Normally CorelDraw x5 will launch Photo Paint when you choose Edit Bitmap from Corel Draw. Then you can edit in photo paint and on save and close you are back in Corel Draw and able to continue there. However this is not the case for me with Parallels 7. It does not launch Photo Paint as expected.
I just got a new touch screen computer and Photo-Paint doesn't even respond to touch events. Is there a patch for this? I also have the unmentionable CC program and it half works by dragging my finger from outside the document then dragging into the doc - which is totally unworkable.
I've read Sony, Toshiba and Asus touch computers aren't compatible with that "other" paint package and Corel. What's the workaround? This is just a shame that no touch screen computers work with them.
Are there any touch screen computersout there that working with drawing packages? Or at least Corel?
I do a LOT of photo editing while using CorelDraw X6. It was really handy to launch the photo editor with the icon. How can I get it to launch, again?
View 7 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View RelatedSay for example *cough cough* I have a photo of a kid wearing a santa hat. How would I turn the rest of the photo black and white (well, grayscale) while leaving the hat's red color alone? Seems to me there should be an easier way than masking off the area, duplicating as a new object and then desaturating the background. But is there?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I would like to cut out an oval shaped photo and insert it into the corner of a larger photo. The question is I would like the edge of the oval photo to fade away so it has a soft edge. How to I achieve this edge.
View 3 Replies View RelatedX5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
02012013010.jpg
Blank Blocks behind text and graphics
Open up a picture
Create a Mask marquee and Cut [Ctrl X]
Undo twice [Ctrl Z twice]. You're now back where you started but with a cut object on the clipboard
Paste [Ctrl V]
Cut [Ctrl X]
Paste again [Ctrl V]
Cut again [Ctrl X]
In my case, the entire image has now been cut, not just the pasted object.The reason I do this is because I'm working with two virtually identical pictures. On one picture there has been a modification which I wish to paste onto the other. I cut and paste but need to align the pasted object with the picture. So, I paste the object and move it; then cut and then paste it to check it's in the correct position. If it's out of alignment then the image appears to move. There may be other ways to do this but I find this way easy.
if I create a new document, say A4, and then import a TIFF photo to that document, the photo appears much larger than my background A4 document. So, do I edit my photo and then export it as a TIFF again, or should I resize my background document from A4 to match the size of my photo before exporting? What I'm asking is that I don't want to lose the original size of my TIFF image, so when I export my image will CD save the TIFF image in it's original size or resize it to that of my created A4 document?
View 1 Replies View RelatedI am using Windows Vista, and I am trying to drag and drop photos from Google images into CorelDraw. I can do it from IE no problem. Chrome is only dragging in the URL text of the image an not the actual photo.
View 2 Replies View RelatedI am setting up some photos that will be exported as png files for use in Publisher.
I need grungy photo edges to be transparent so her background shows through the grunge effect.
I posted this topic about Corel x4 and got some answers. Unfortunately it didnt work because my corel was corrupt. But now I installed my old Corel 12 and tried to follow the instructions the same way as they told me to do it in Corel x4, but the options are different.
So..... how do i make the settings so that when i double click on an image in corel 12, it will take me directly to Corel Photo for editing.
how to add more pixels to make a photo bigger and better
View 1 Replies View RelatedIs there a way to make the foreground color the default fill color? Having to click that every time is difficult.
View 6 Replies View Related
