using CorelDraw 5 with Parallels 7 on a MacBookPro to access Windows 7 and CorelDraw X5 -
Normally CorelDraw x5 will launch Photo Paint when you choose Edit Bitmap from Corel Draw. Then you can edit in photo paint and on save and close you are back in Corel Draw and able to continue there. However this is not the case for me with Parallels 7. It does not launch Photo Paint as expected.
I downloaded Corel 15 trial verson but decided not to purchase. After trial I uninstalled the trial. Now when I use my pre-installed Corel 13 when I try to edit bitmap within Corel draw it open Windows 7 paint instead of Corel 13 Photo Paint. I tried doing a re-install REPAIR but I am having same issue.
View 6 Replies View RelatedI do a LOT of photo editing while using CorelDraw X6. It was really handy to launch the photo editor with the icon. How can I get it to launch, again?
View 7 Replies View RelatedWe have just purchased X6 and are having difficulty editing a bitmap. Its unable to be selected.
After reading your posts here we have tried the following which we find quite annoying for a new program.
Surely this is something simple we have missed. All we have done is installed the X6 and run the program , clicked on a bitmap and nothing ??? This has really left a bad experience especially when we just purchased this program and it cant even edit an image. The customer support was terrible , I had to ring back because the person couldn't hear me about 8 times. It was only a search on the web that led me here.
When having photos in CorelDraw, I need to edit them so I right click on the photo and select "Edit Bitmap". I am not too familiar with Photo-Paint, and wonder if I could link to another application (ie photoshop) to make my bitmap changes.
View 4 Replies View RelatedI created a bitmap in draw 15" x 131" then right clicked the image and selected "Edit Bitmap". The image grew to 19" X 131"... I did this again just to verify and got the same results. I resamled the image back to 15". This is a big concern as we process all our printed images this way.
View 17 Replies View RelatedI have just run CC Cleaner and Glary Utilities , which we have been running for years , and every time it removes the Edit Bitmap link menu, in other words it greys out.
How can you edit the bitmap in Photoshop ? And get it the edit Bitmap menu functioning ?
The tool now appears to be greyed out , have done file repair each time , but only lasts a few goes then goes back to greyed out state.
It is impossible to get anywork done because of this bug.
As an emerbgency have had to go back to X5.
Also serial number does not work in Website Creator X6 ... more bugs.
I click on a bitmap in draw it opens up in paint fine and i edit as normal but when i save edit changes, it does not alter the bitmap within draw .
View 1 Replies View Relatedis there any way to make "edit bitmap" in corel-draw to work with photoshop instead corel-photopaint?
View 2 Replies View Relatedcomplete Corel X4 uninstall 3 times already .... even went so far as to reboot the registry to a date before I installed Corel X4 Suite to no avail.
The program has had no issues until the last 2 weeks. The actual issue I am having is Paint works fine as a separate entity however when I try to edit a bitmap from within X4 an error pops up telling me "Failed to launch server application" This is a major PITB as I own a graphics company and this is causing no end of problems
I am currently using this method, creating a 1-bit bitmap from a grayscale "distress" texture bitmap, choosing transparent fill or outline depending on which area i need trasparent and powerclip it in text or other vector object.
Is there a way to achieve the same distress effect with transparency with FILL ? pattern fill maybe? eg can i save in some format this bitmap to use it maybe as a pattern in pattern fill and retain transparency ?
sample file (X4)
I have been working with both Corel Draw 12 and and at some point Photo Paint just froze. Empty main area, just one docker opened. Doesn't matter where I click on the screen, the same metallic clicking response. I uninstalled the whole suite and installed it again.
No difference, the same screen starts and the same freeze. I can only close it using Task Manager. Corel Draw works find and Photo Paint works fine on the other computer on which I installed it at the same time.
A customer sent me an RGB bitmap with a transparent background. I converted it to a grayscale and I erase it in PhotoPaint but can't paint over it. This isn't the original bitmap, I converted it and assumed that would get rid of any clip masks or other attributes.
Here's the bitmap as a JPEG.
When trying to open an EPS file in Corel PHOTO-PAINT, an error appears indicating that "The file cannot be opened".
AND, when PP is trying (unsuccesfully) to load the file, it also convert it into CPT, instead of keeping the EPS format.
(Photoshop can open EPS files without any problem...)
[Windows XP SP3, CDGS X5 SP2]
Every time I double click on a bitmap in Corel Draw, it opens up Photo Paint. How can I disable this option? I never use it and its a waste of my time because it takes too long to load up! I don't know if my mouse has a problem, but sometimes I can just click once on a bitmap and it triggers the photo paint to open.
View 7 Replies View RelatedPhoto paint uses an absurd amount of CPU when drawing a line; the brush "lags" and stutters about the screen, too. My system CPU is a Core i7-2600k, and all 8 threads are maxed during the drawing of the line. Why would this be?
Screenshot: [URL]......
how to take a jpg or gif file and change the colors of the image? I am having difficultly doing so. It is our company logo which is in 2 colors and I merely want to change it to white.
View 9 Replies View RelatedAfter creating text in Draw X6, I can't drop it into Photo-Paint without it appearing to be improperly cropped; i.e., some outer edges of letters appear to be cut off (see example below). Converting the text to curves does not solve the issue.
Strangely, I have no problem if I copy the same text from Draw X5 - the results are excellent.
Every since I updated CDx6, Photo-Paint no longer allows for drawing or erasing in a straight line by clicking, pressing the alt key and clicking again. Instead a scale comes up that changes the brush opacity...What happened? I can't figure out what happened. See attached file. The red arrow indicates what comes up when alt is pressed.
View 5 Replies View RelatedWe upgraded to x6.1 and are having some issues. I have X5 and X6 installed on my machine. When using X6 and you add a new page to the document, then publish a PDF. The PDF will show grid lines on the new pages. This happens with new docs and previously created docs when we add new pages. Also, on the new pages, you can't disable the printing in the object manager.
Second problem, when you have a bitmap in your document and click on it, Photo Paint is available. Only the trace option. Edit Bitmap is grayed out on the Property Bar and not available when you right click the image. I have to open Photo Paint and copy the image into it. There are three of us having the same problems.
System
Win 7 Pro 64-bit SP1Platform version:6.1Platform build number:7601Platform info:Service Pack 1
When I do screenshots and copy them into Photo PAINT, PP seems to shade the colors. Why is this happening?
How can I switch off this behavior?
Here's an example of what's happening when I do a screenshot of a screenshot of a screenshot of a screenshot of a Photo PAINT desktop, always overlaying the same original empty image window upon the current screenshot step:
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I don't know if this is just a Windows 8 compatibility issue, but when I save an edited photo it is stored in whatever orientation I opened it. Also the thumbnails only show the original imported image, not the edited image.
For instance if I took a picture in a sideways orientation on my smart phone then opened it in PPX5 I can rotate, edit and save and it will show the original image in a sideways orientation. If I post the image on Facebook it will show up sideways. If I put it on a forum it may look okay but people with iPads and iPhones see it sideways.
My corel x4 was coryupt and I had to install my older Corel 12.
Options on this corel are different. So in Corel 12, how do i change the settings so that when I double click on an image, it will open it in Corel photo for editing?
I just got a new touch screen computer and Photo-Paint doesn't even respond to touch events. Is there a patch for this? I also have the unmentionable CC program and it half works by dragging my finger from outside the document then dragging into the doc - which is totally unworkable.
I've read Sony, Toshiba and Asus touch computers aren't compatible with that "other" paint package and Corel. What's the workaround? This is just a shame that no touch screen computers work with them.
Are there any touch screen computersout there that working with drawing packages? Or at least Corel?
Every time I try to generate a bitmap with 300 dpi in x6, he disappears
View 14 Replies View RelatedI got a new MAC OS X 10.6.2 last spring and installed the CorelDraw 11 that I've used for several years on my other MACS. When I try to use a bitmap effect from the drop down menu (like 3D effects, art strokes, creative, contour etc...) the boxes do not open. I've tried reinstalling the application and it didn't work. I was always able to use these effects on my other computers. Every other menu item I use works. I wish Corel would make something new for MACs
View 1 Replies View RelatedMGD 64 lemonade to forum.cdr
This isn't something I am in need of because in the future with this graphic I would just convert the background. Just wondering why it made those odd lines coming off of the words and the black bar (I don't know how the heck you guys can post large things, things with motion, etc. I have to make things miniature to put them on here)
I assume it has something to do with how the original, that came from MillerCoors, has those layers of lines in it. I just don't get why lines would then be visible when I changed it since nothing like that has happened before. Oh, and if you are wondering why I converted it, it's because I knew my rip server wouldn't like all that stuff going on in the original
Contour on a bitmap shape.
I thought this was doable. Today I found it's not, or stopped working.
"The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it.[URL]
Does exist this macro for X5:
[URL]
I'm trying it but it doesn't work for x5, and my previous version of Coreldraw is 10,
I've got Service Pack 3 which is the latest and greatest and am still finding that I cannot export to any bitmap format even in PhotoPaint. I can save as a .cpt file in PhotoPaint. Sometimes I send out .jpeg proofs and doesn't matter whether it is X5 Draw or PhotoPaint, it crashes.
I do not have this problem when I export the same thing from X4 Draw or PhotoPaint.
I am running XP on a virtualized Windows environment via Parallels desktop for Mac. I have plenty of RAM and hard drive space so it may be because I am not running Windows 7?
