AutoCad :: Printed Drawing Size To Fold Into A4
Mar 3, 2008Which size do you use to print off a drawing that can be folded into A4 size?
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: Fold Round Plate Like In The Drawing?
Nov 11, 2013I have been trying to fold a round plate which has 10 milimeters thickness.Is there any way to fold this or unfold ?
View 4 Replies View RelatedAutoCAD 2010 :: Strange Lines On Printed Drawing?
May 11, 2012When I print out a certain drawing, there are a couple of lines that show up that are not visible in the drawing or on the preview of the drawing. Therefore, I don't know where the lines are coming from nor can I delete them.
View 2 Replies View RelatedCorelDRAW X5 :: Printed Image Size Not Same As Actual
Nov 28, 2011Printed some rectangle that are 7.5 x 14.5 inches wide on the corel page on the monitor, but they did not actually print 7.5, they were about 1/4 inch smaller! the 14.5 dimension was fine. got to measuring other images I have printed and some are perfect, some are off.
View 1 Replies View RelatedGIMP :: Making Collage Printed On A3 Size
Sep 24, 2012I am trying to make a collage which will be printed(=300 DPI) on A3(420 × 297 mm) sized paper. The images I want to take elements from for my collage are all different in size and DPI. When these elements come together they should be similar in size in order to create a new believable scene. 1 element can't be absurdly large in relation to another.
So what I did for my first image (size of 3456 × 2304 pixels, a print-size of 1219,20 × 812,80 mm and DPI 72 × 72) was increase the DPI to 600 in order to obtain a smaller printsize - reducing it to 146,30 × 97,54 mm - cut-out the elements I need and import them into my A3 document. This gave me the size I need for my elements.
However when I try to take elements out of the second image (size of 1500 × 1125 pixels, a print-size of 211,67 × 158,75 mm and DPI 180 × 180) - which I leave unchanged because 211,67 × 158,75 mm is about the size I need for the elements - and place them into the A3 document they are too small. Same story for the third image (size of 2400 × 1600 pixels, a print-size of 304,80 × 203,20 mm and DPI 200 × 200)
Illustrator :: Increase Size Of Page Information On Printed Artwork?
Dec 20, 2012Is it possible to increase the size of the page information on the printed artwork?
View 3 Replies View RelatedAutoCAD .NET :: When Plot PNG Or JPG File - Edit Paper Size According To Drawing Size
Oct 17, 2012Using ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
AutoCAD 2013 :: Fold Panel In Ribbon?
Apr 10, 2013What is a "Fold Panel" in the Ribbon. I can't find any information on it in the documentation?
View 3 Replies View RelatedAutoCAD Inventor :: Fold Will Not Select Line?
Apr 18, 2012I am trying to fold the attached sheet metal part that is created from an imported ACAD drawing. After cleaning up the sketch I created the face and then created a sketch with the first bend line on it, but when I attempt to flod the part it will not sellect the bend line. I have attempted selecting the line before selecting fold and that does not work. I have placed the sketch both on the part surface and the datum plane. The only line I can get fold to select are the two ends of the part but I don't see how anything could be bent off the end of the part.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
AutoCAD Inventor :: Creating A Sharp Fold
Aug 24, 2012I am trying to fold a sheet into an "L" shape (using the the Fold command) but i would like to have the inside of the bend to be sharp and not a radius like on the outside. Is there any way that i can achieve this?
View 8 Replies View RelatedAutoCAD Inventor :: Fold Part Of A Surface?
May 3, 2012I am having real difficulty in putting a fold on a sheet metal part that only fold part of the piece. I have made the part as a solid body and it almost looks the part but not quite.how to draw the part as a sheet metal piece.
The is very simple to make as a sheet metal part, the piece in question is placed into the press brake to the 34mm depth and then its folded to the 13 degree angle.
AutoCAD Inventor :: Dimensions And Fold Up / Down On Flat Pattern?
Oct 4, 2011Is there a feature on the latest series of inventor whereby you can automatically generate fold detail on the flat pattern , ie. fold up 45 degrees, eliminating mistakes. I am currently on Inventor 2008 so this feature could be on a new version.
View 1 Replies View RelatedAutoCAD Inventor :: Sheet Metal Fold Puzzle
Mar 11, 2013The left-hand part was created by someone else, using the bend part command in the "modify" tab.The right-hand part was created by me using fold in the sheet metal environment, using the same sketch.Why, is my part shorter?
View 3 Replies View RelatedAutoCAD Inventor :: Sheet Metal - Fold (bend And Twist)
Apr 23, 2012I have the following sheet metal application: A flat bar steel (strip) 40x1mm is bent and twisted around three cylinders. In our process, the strip is running in loop around these cylinders, like a conveyor-belt. At first, it is bent around the first cylinder (blue). Then, it is bent and twisted around the second cylinder (green). Between these cylinders, a flat part is modelled so that the strip will be bent upwards (twisted) around the next cylinder. The same is done between cylinder two and three. In praxis, when I bend the strip, no flat part will be present, because the strip is quite stiff, as it is spring steel. In my Inventor model, no stiffness of the strip is taken into consideration.
I am looking for a better way to model this strip, where stiffness of the material is taken into consideration.
AutoCAD Inventor :: Sheet Metal Fold Simulation Software
Dec 16, 2012Does a low cost or free software program that could simulate folding of sheet metal patterns so I can work out the best fold sequence eliminating collisions etc.. Based on my stock tooling shapes and sizes and machine limitations?
View 3 Replies View RelatedAutoCAD Inventor :: Flat Pattern Of Part With Flanges And Fold Won't Generate
Sep 26, 2011The last feature of this L-Bracket is a fold. When I create the flat pattern it is only unfolded, not completely flattened. Prior to INV 2009, I could get a wireframe flat pattern with the part still folded. Since then, I have to unfold to get a flat pattern. The only way to show the formed part and flat pattern in IN2012 is to use a derived part with the base component supressed and the base component with the fold supressed.
How to be able to simply flatten this part so I don't have to do extra work with two parts
AutoCAD Inventor :: Fold Lines In A Border Definition With Parameters And ILogic
May 7, 2012So far I can discover parameters and ilogic aren't possible in the definition of a drawing border.
How can fold lines be created in a border that can be used for multiple scales?
CorelDRAW X4 :: Fold Lines
Oct 2, 2011Luckily I found your site I have used CorelDraw X4 for a couple of years now, mainly for my crafting hobby. For some strange reason now, sometime when I created a dashed line (as I always have before) and send to my cutter it arrives as a solid cut line and not a "pounce" line. It doesn't always happen to all of the dashed lines which on the visual in Corel are correct. Even if I try to delete a problem line and create a new correct one and then send again to the cutter, either this or even one of the correct "pounce" lines will appear as a solid cut line. I've never had the problem before so I tried a "repair" to Corel which doesn't seem to have had any effect.
View 11 Replies View RelatedPhotoshop :: Create Fold Marks In CC
Aug 13, 2013I have a 3 fold brochure with offset fold marks to accommodate bleeds and trim fold. How do I create fold marks on the file?
View 2 Replies View RelatedPhotoshop :: How To Make 3 Fold Leaflet
Aug 24, 2012I am very new to photoshop but would like to create a professional looking A4 3 fold leaflet (takeaway-leaflet-type).
how I can create such thing, or any other application I can use?
AutoCad :: Drawing In Mm - Dimension Size Big
Aug 16, 2012Why the dimension is this big? My draw is in mm. I tried to change the dim scale but no success.
dim.jpg
AutoCad :: How To Get Drawing In Actual Size
Apr 30, 2012I imported an autocad drawing and it is 1:1 but the dimension are not the actual size. How do i correct this? The dimension shown is 42.31
View 8 Replies View RelatedAutoCad :: Drawing Size Changing?
Mar 26, 2013I just opened a drawing, bound all the xrefs and saved it. I noticed that when I save the drawing in model space, the size is 10mb smaller than if I save it in paper space. This is the same drawing, and all that is changing is whether I save it in model space or paper space.
What causes this? I tried it on 3 or 4 drawings and got the same result - but only when I bind the xrefs.
AutoCad :: Different Size Dimensions On Same Drawing
Nov 23, 2012Is there a way of having different size dimensions on the same drawing? when i go into Annotate, then dimensions and change text size it changes all of the dimensions. in other cad packages i've used you can change selected text and so on a drawing you can for example you can have some text at 100mm and some at 25mm.
View 2 Replies View RelatedPhotoshop :: Paper Fold / Crease Lines?
Jul 3, 2011I'm looking to recreate the crease/fold lines below. I've found various tutorials showing ways to create fold lines using thegradient tools (i.e putting black/white to create fold) and others that use an overlay of crinkled image and making opaque.Neither of these produce effects like the ones attached.
View 4 Replies View RelatedPhotoshop :: How To Get Edges To Fold Round Behind Navigation Bar
Jun 28, 2012How I get the edges to fold round behind the navigation bar exactly as it is in this picture.
I know how to round corners, but that' not what this is. I know its almost the same as a ribbon, but its not, its folding round behind the background color.
CorelDRAW X6 :: Create Booklet With Staggered Fold?
Jun 11, 2013I need to create a booklet with a staggered fold, so that there are tabs. It is basically a booklet where the pages are offset 1/4" - 1/2" before folding/stapling. How to set this up in DRAW, or is there a template somewhere I can use?
View 6 Replies View RelatedGIMP :: Cannot Create Fold / Permission Denied
Dec 15, 2013I downloaded v from for iMac OS X v10.7.5..The error message i get is: cannot create fold permission denied
View 10 Replies View RelatedAutoCAD 2010 :: Drawing Size Too Large?
Aug 4, 2013I am currently working for pepsi factory with huge machines in their factory building. My problem is that these drawings are very big and not loading quite well even in high performance systems. My current drawing size is about 120MB, without any hrefs.
View 9 Replies View RelatedAutoCAD 2010 :: Drawing Size On An A4 At Different Scales?
Mar 18, 2012Drawing size on an A4 at different scales,The A4 can have a drawing size up to 29.7x21 meters when printing with a scale of 1/100 while it can have up to 14.8x105 meters when printing with a scale of 1/500.
Does this mean that we need to have different title blocks each time we print in an A4 paper size with different scale?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCad :: Reducing File Size Of Drawing?
Jan 4, 2013i have produced a drawing and have copped and pasted quite a few photograhs on it showing details etc. however bnow my drawing has a very large file size. i have purged drawing, it is the photographs
View 3 Replies View Related