I need to create a booklet with a staggered fold, so that there are tabs. It is basically a booklet where the pages are offset 1/4" - 1/2" before folding/stapling. How to set this up in DRAW, or is there a template somewhere I can use?
View 6 RepliesAm working as a technical editor for a medical university, I got an earlier job file of their booklet, so I was wondering is there any way to get to know which fonts are used in the whole booklet, as I am assigned to re-arrange the whole booklet but keeping the current fonts & spacings. Finding fonts manually seems impossible as it got more then 160 pages
View 3 Replies View RelatedI have a problem printing a merge booklet 8 pages. I am printing to a booklet printer. The printer folds and staples the booklet. When I merges the print I cannot “group” the pages to 8. The printer collates all the pages and make one booklet. How do I group the booklet one by one to several booklets of 8 pages. Windows 7 - 64 bit.
View 14 Replies View RelatedHow do i spread a picture over two pages in booklet. Options, Layout facing pages has been set already.
The booklet is A5 size that is A4 folded.
I have a 320page coreldraw X3 file. How do i print booklet in batches of 8pages each i.e. 1-8, 9-16, 17-24 etc.
View 5 Replies View RelatedI have a 3 fold brochure with offset fold marks to accommodate bleeds and trim fold. How do I create fold marks on the file?
View 2 Replies View RelatedI downloaded v from for iMac OS X v10.7.5..The error message i get is: cannot create fold permission denied
View 10 Replies View RelatedLuckily I found your site I have used CorelDraw X4 for a couple of years now, mainly for my crafting hobby. For some strange reason now, sometime when I created a dashed line (as I always have before) and send to my cutter it arrives as a solid cut line and not a "pounce" line. It doesn't always happen to all of the dashed lines which on the visual in Corel are correct. Even if I try to delete a problem line and create a new correct one and then send again to the cutter, either this or even one of the correct "pounce" lines will appear as a solid cut line. I've never had the problem before so I tried a "repair" to Corel which doesn't seem to have had any effect.
View 11 Replies View RelatedI'm quite new to illustrator and I am trying to make a company catalogue.
On screen the pictures look ok and they are high res. When I print A3 the pictures print perfectly but when I print in an A4 booklet they are really blurrey.
How can I print a booklet without a white outline around the border? I'd like the front page to be covered entirely.
View 1 Replies View RelatedIs there a workflow to transfer a booklet created in InDesign into Designer Pro?
View 1 Replies View RelatedI am producing a newsletter that will be 17x11 with a double fold for mailing. I will also save it as a .pdf for e-mailing. I set my document up as 8.5 x 11, 4 pages. I've put in all my text and graphics but when I go to Print Booklet, the preview looks fine, the problem is when I select print I get this error message: "The active document uses multiple pages sizes. Print Booklet works only with documents that us a consistent page size." I rechecked and all my pages are set for 8.5 x 11.
View 10 Replies View RelatedDialog box:"The active document uses multiple page sizes Print Booklet works only with documents that use a consistent page size."OK, but the page sizes are all the same.
View 26 Replies View RelatedI am very new to photoshop but would like to create a professional looking A4 3 fold leaflet (takeaway-leaflet-type).
how I can create such thing, or any other application I can use?
I'm looking to recreate the crease/fold lines below. I've found various tutorials showing ways to create fold lines using thegradient tools (i.e putting black/white to create fold) and others that use an overlay of crinkled image and making opaque.Neither of these produce effects like the ones attached.
View 4 Replies View RelatedHow I get the edges to fold round behind the navigation bar exactly as it is in this picture.
I know how to round corners, but that' not what this is. I know its almost the same as a ribbon, but its not, its folding round behind the background color.
What is a "Fold Panel" in the Ribbon. I can't find any information on it in the documentation?
View 3 Replies View RelatedI am trying to fold the attached sheet metal part that is created from an imported ACAD drawing. After cleaning up the sketch I created the face and then created a sketch with the first bend line on it, but when I attempt to flod the part it will not sellect the bend line. I have attempted selecting the line before selecting fold and that does not work. I have placed the sketch both on the part surface and the datum plane. The only line I can get fold to select are the two ends of the part but I don't see how anything could be bent off the end of the part.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
I am trying to fold a sheet into an "L" shape (using the the Fold command) but i would like to have the inside of the bend to be sharp and not a radius like on the outside. Is there any way that i can achieve this?
View 8 Replies View RelatedI am having real difficulty in putting a fold on a sheet metal part that only fold part of the piece. I have made the part as a solid body and it almost looks the part but not quite.how to draw the part as a sheet metal piece.
The is very simple to make as a sheet metal part, the piece in question is placed into the press brake to the 34mm depth and then its folded to the 13 degree angle.
Which size do you use to print off a drawing that can be folded into A4 size?
View 9 Replies View RelatedIs there a feature on the latest series of inventor whereby you can automatically generate fold detail on the flat pattern , ie. fold up 45 degrees, eliminating mistakes. I am currently on Inventor 2008 so this feature could be on a new version.
View 1 Replies View RelatedHow to create a adjustable_angle Bi-fold door family.
View 4 Replies View RelatedI have been trying to fold a round plate which has 10 milimeters thickness.Is there any way to fold this or unfold ?
View 4 Replies View RelatedThe left-hand part was created by someone else, using the bend part command in the "modify" tab.The right-hand part was created by me using fold in the sheet metal environment, using the same sketch.Why, is my part shorter?
View 3 Replies View RelatedI have Elements 9 and created a card in bi-fold format and cannot figure out how to get it to print in that format. I have a Dell V715W printer. Photoshop help is not useful. I am trying to figure out if I need to print add a blank page to the front and print two pages to one sheet (front and back) or something else. There don't seem to be many options when printing or edit options to the file/project/card within Elements 9.
View 7 Replies View RelatedI have the following sheet metal application: A flat bar steel (strip) 40x1mm is bent and twisted around three cylinders. In our process, the strip is running in loop around these cylinders, like a conveyor-belt. At first, it is bent around the first cylinder (blue). Then, it is bent and twisted around the second cylinder (green). Between these cylinders, a flat part is modelled so that the strip will be bent upwards (twisted) around the next cylinder. The same is done between cylinder two and three. In praxis, when I bend the strip, no flat part will be present, because the strip is quite stiff, as it is spring steel. In my Inventor model, no stiffness of the strip is taken into consideration.
I am looking for a better way to model this strip, where stiffness of the material is taken into consideration.
Does a low cost or free software program that could simulate folding of sheet metal patterns so I can work out the best fold sequence eliminating collisions etc.. Based on my stock tooling shapes and sizes and machine limitations?
View 3 Replies View RelatedLet's say, for example, that i create an object with a size, then i create other objects with other sizes.
When I try to see the size of the first object created it says that has the same size like the other objects which have other sizes (it's even obvius cause they r bigger on my screen:D).With all the other versions of Corel i didn't had those problems, but X5 does that.
The last feature of this L-Bracket is a fold. When I create the flat pattern it is only unfolded, not completely flattened. Prior to INV 2009, I could get a wireframe flat pattern with the part still folded. Since then, I have to unfold to get a flat pattern. The only way to show the formed part and flat pattern in IN2012 is to use a derived part with the base component supressed and the base component with the fold supressed.
How to be able to simply flatten this part so I don't have to do extra work with two parts
I'm looking for an easy way to get a simple page fold effect on a 2D Logo. I'm playing around here in Axis with the surface set to Bicubic but I'm moving around the corners and handles and can't really achieve a realistic look. Is there something like page fold in the Avid where you can adjust the fold radius and it simply works....?
View 2 Replies View Related