CorelDRAW X4 :: Fold Lines
Oct 2, 2011
Luckily I found your site I have used CorelDraw X4 for a couple of years now, mainly for my crafting hobby. For some strange reason now, sometime when I created a dashed line (as I always have before) and send to my cutter it arrives as a solid cut line and not a "pounce" line. It doesn't always happen to all of the dashed lines which on the visual in Corel are correct. Even if I try to delete a problem line and create a new correct one and then send again to the cutter, either this or even one of the correct "pounce" lines will appear as a solid cut line. I've never had the problem before so I tried a "repair" to Corel which doesn't seem to have had any effect.
View 11 Replies
ADVERTISEMENT
Jul 3, 2011
I'm looking to recreate the crease/fold lines below. I've found various tutorials showing ways to create fold lines using thegradient tools (i.e putting black/white to create fold) and others that use an overlay of crinkled image and making opaque.Neither of these produce effects like the ones attached.
View 4 Replies
View Related
May 7, 2012
So far I can discover parameters and ilogic aren't possible in the definition of a drawing border.
How can fold lines be created in a border that can be used for multiple scales?
View 1 Replies
View Related
Jun 11, 2013
I need to create a booklet with a staggered fold, so that there are tabs. It is basically a booklet where the pages are offset 1/4" - 1/2" before folding/stapling. How to set this up in DRAW, or is there a template somewhere I can use?
View 6 Replies
View Related
Feb 8, 2013
Trim tool errors when cutting lines with lines CorelDraw X6
View 1 Replies
View Related
Aug 13, 2013
I have a 3 fold brochure with offset fold marks to accommodate bleeds and trim fold. How do I create fold marks on the file?
View 2 Replies
View Related
Aug 24, 2012
I am very new to photoshop but would like to create a professional looking A4 3 fold leaflet (takeaway-leaflet-type).
how I can create such thing, or any other application I can use?
View 4 Replies
View Related
Jun 28, 2012
How I get the edges to fold round behind the navigation bar exactly as it is in this picture.
I know how to round corners, but that' not what this is. I know its almost the same as a ribbon, but its not, its folding round behind the background color.
View 7 Replies
View Related
Apr 10, 2013
What is a "Fold Panel" in the Ribbon. I can't find any information on it in the documentation?
View 3 Replies
View Related
Apr 18, 2012
I am trying to fold the attached sheet metal part that is created from an imported ACAD drawing. After cleaning up the sketch I created the face and then created a sketch with the first bend line on it, but when I attempt to flod the part it will not sellect the bend line. I have attempted selecting the line before selecting fold and that does not work. I have placed the sketch both on the part surface and the datum plane. The only line I can get fold to select are the two ends of the part but I don't see how anything could be bent off the end of the part.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 3 Replies
View Related
Dec 15, 2013
I downloaded v from for iMac OS X v10.7.5..The error message i get is: cannot create fold permission denied
View 10 Replies
View Related
Aug 24, 2012
I am trying to fold a sheet into an "L" shape (using the the Fold command) but i would like to have the inside of the bend to be sharp and not a radius like on the outside. Is there any way that i can achieve this?
View 8 Replies
View Related
May 3, 2012
I am having real difficulty in putting a fold on a sheet metal part that only fold part of the piece. I have made the part as a solid body and it almost looks the part but not quite.how to draw the part as a sheet metal piece.
The is very simple to make as a sheet metal part, the piece in question is placed into the press brake to the 34mm depth and then its folded to the 13 degree angle.
View 5 Replies
View Related
Mar 3, 2008
Which size do you use to print off a drawing that can be folded into A4 size?
View 9 Replies
View Related
Oct 4, 2011
Is there a feature on the latest series of inventor whereby you can automatically generate fold detail on the flat pattern , ie. fold up 45 degrees, eliminating mistakes. I am currently on Inventor 2008 so this feature could be on a new version.
View 1 Replies
View Related
Nov 14, 2011
How to create a adjustable_angle Bi-fold door family.
View 4 Replies
View Related
Nov 11, 2013
I have been trying to fold a round plate which has 10 milimeters thickness.Is there any way to fold this or unfold ?
View 4 Replies
View Related
Mar 11, 2013
The left-hand part was created by someone else, using the bend part command in the "modify" tab.The right-hand part was created by me using fold in the sheet metal environment, using the same sketch.Why, is my part shorter?
View 3 Replies
View Related
Nov 28, 2010
I have Elements 9 and created a card in bi-fold format and cannot figure out how to get it to print in that format. I have a Dell V715W printer. Photoshop help is not useful. I am trying to figure out if I need to print add a blank page to the front and print two pages to one sheet (front and back) or something else. There don't seem to be many options when printing or edit options to the file/project/card within Elements 9.
View 7 Replies
View Related
Apr 23, 2012
I have the following sheet metal application: A flat bar steel (strip) 40x1mm is bent and twisted around three cylinders. In our process, the strip is running in loop around these cylinders, like a conveyor-belt. At first, it is bent around the first cylinder (blue). Then, it is bent and twisted around the second cylinder (green). Between these cylinders, a flat part is modelled so that the strip will be bent upwards (twisted) around the next cylinder. The same is done between cylinder two and three. In praxis, when I bend the strip, no flat part will be present, because the strip is quite stiff, as it is spring steel. In my Inventor model, no stiffness of the strip is taken into consideration.
I am looking for a better way to model this strip, where stiffness of the material is taken into consideration.
View 1 Replies
View Related
Dec 16, 2012
Does a low cost or free software program that could simulate folding of sheet metal patterns so I can work out the best fold sequence eliminating collisions etc.. Based on my stock tooling shapes and sizes and machine limitations?
View 3 Replies
View Related
Sep 26, 2011
The last feature of this L-Bracket is a fold. When I create the flat pattern it is only unfolded, not completely flattened. Prior to INV 2009, I could get a wireframe flat pattern with the part still folded. Since then, I have to unfold to get a flat pattern. The only way to show the formed part and flat pattern in IN2012 is to use a derived part with the base component supressed and the base component with the fold supressed.
How to be able to simply flatten this part so I don't have to do extra work with two parts
View 3 Replies
View Related
Jan 13, 2014
I'm looking for an easy way to get a simple page fold effect on a 2D Logo. I'm playing around here in Axis with the surface set to Bicubic but I'm moving around the corners and handles and can't really achieve a realistic look. Is there something like page fold in the Avid where you can adjust the fold radius and it simply works....?
View 2 Replies
View Related
Oct 20, 2013
I have a shape I've drawn with just lines, no fill or anything, and I'm trying to cut off part of it to make it flush with an adjacent object. Just trying to cut outlines, and remove the unwanted portions.
In the manual it says:
1.In the toolbox, click the Knife tool .
2.Position the Knife tool over the object’s outline where you want to start cutting.The Knife tool snaps upright when positioned properly.
3.Click the outline to start cutting.4.Position the Knife tool over the object’s outline where you want to stop cutting, and click again.
I do this and... - NOTHING. No cutting of any kind occurs. The entire object remains completely unchanged. I also tried using the "eraser" and all it did was nudge my lines around. Not quite what I wanted, either.
View 9 Replies
View Related
Jul 18, 2011
I'm occasionally using CD X4 just for fun (so i'm not that experienced). My friend who has a digital printer, once printed one of my designs but there were stripes (like you have when there's little ink in a printer) only in gradient filled areas When i fill a shape with gradient colors, i also see these stripes on my screen (when i look very close) in CD and also in pdf when i export the file. What can i do?
View 7 Replies
View Related
Feb 17, 2013
I got some complex drawings (15-25mb clothing design), any ways to change example all RED lines til a other color with just few clicks or it only possibly to do when I work in lays. I just head to work in lays
View 3 Replies
View Related
Jul 25, 2013
I'm more of a "recreational" user of coreldraw, so there is plenty that I don't know!...
I'm hoping that this is an easy question for many...
Plain and simple... How do you make lines "scalable?"
I have created a project, but when all the elements are combined, and I try to scale the size up or down, the lines don't scale (I hope this makes sense)...
I'm hoping that there is an easy way other than continuing to change the line thickness every time I vary the size of the image.
View 2 Replies
View Related
Jan 19, 2012
I'm currently working with some vectorial cartoonish drawings, and while it's mostly quite easy, I'm having problems with disconnected lines. At the end of a disconnected line it needs to gradually get thinner and end in a small, rounded off point. It needs to to become thinner much slower than the normal rounded-off point, kind of a sharpenned edge effect.
So far the only method I could manage is making a shape instead of a line, but it's much harder to work whenever I want to change something, since I have to rework node by node. So I was wondering if there was a way to convert a line into a shape, so I can modify it all I want as a line, and then turn it into a shape and add the sharpened end.
View 7 Replies
View Related
Sep 29, 2011
Screenshot PDF Problem.jpg
When I publish something to PDF (in order to send it to a professional presser) the cutting lines are set on the 'bleed edge' instead of excluding the neccesary bleed margin of 3mm. In other words I am not able to provide any PDF document with a bleed margin which is (obviously) very frustrating for the pressing company as well as for me.
- In Publish to PDF > Settings > Pre-press I checked the cutting-line box ( I work with a dutch version so excuse me if the the right translations aren't used. Check attached file for the settings).
- When I check the box 'Aflopen' (just above the cutting line box) the PDF file turns out white.
View 14 Replies
View Related
Mar 8, 2013
I'm new to CorelDraw X5. I just downloaded a trial to play with
I would like to know if it's possible in CorelDraw to make a line with the Pen tool and then taper the start and end of that line and what the steps are to do this.
View 5 Replies
View Related
May 31, 2012
I designed back side of a business card with Arial font, When I printed cards I got horizontal little lines on besides and under text lines. On computer monitor it was only showing clear text in Enhanced view mode. When I changed view mode to Wireframe, then these lines shows on screen also. I only have text on this file, no background or any other object. I tried to change the font to other font types including Tru Type fonts also, but problem remained same.
I never had this problem with X5.
View 8 Replies
View Related
