CorelDRAW X5 :: Printed Image Size Not Same As Actual

Nov 28, 2011

Printed some rectangle that are 7.5  x 14.5 inches wide on the corel page on the monitor, but they did not actually print 7.5, they were about 1/4 inch smaller! the 14.5 dimension was fine. got to measuring other images I have printed and some are perfect, some are off.

View 1 Replies


ADVERTISEMENT

CorelDRAW X3 :: Define Size And How To Set Actual % Size Back As 100%

Feb 16, 2008

I really can't believe that it is not possible in Corel Draw.

1) How to define size of object, for example rectangle before I actually draw first time the custom shape of the rectangle?  So far I draw any rectangle and then change the size which is not professional way I guess, because it causes many problems. (like for example I cant change ratioif it is going to be rectangle with rounded corners)
 
2) Very often in my work I need to change % size of my artwork or object because a client wants to have something 80% size or 20% smaller. I found it impossible to do because CorelDraw keeps remember all % transformations since original size was created. Now, provided that my 1) problem has no solution we end up in such a situation:

- my first rectangle is always NOT in correct, precise size 

- when I amend the size it has a correct size but already has different than 100% value.

- Corel Draw forces me to choose: 100% value and not precise size or correct size and for example 113,9%

I completely don't understand what for is the feature that remembers the original size, it's not so needed in practice especially that IT IS A VALUE BASED ON ALWAYS WRONG INITIAL SIZE. Is it so difficult to place a button next to % value called RESET to 100%?  (without going back to initial size of course) I know there are tricks for exampleto group the object temporary with other object but it is not a proper way, is it?

Graphic Designer, Web designer and playing with Video and Audio mixing and editing as well ;-).Working for Large Format Printing company Carrick Signs.

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Viewing In Actual Size

May 7, 2011

I had made a billboard design( 12 feet x 6feet) and how to see that in actual size,

View 5 Replies View Related

Photoshop :: Difference Between Actual Pixels And Actual Print Size

Feb 22, 2009

What is the difference between Actual Pixels and Actual Print Size?

View 15 Replies View Related

Photoshop :: Scale An Image To Actual Size?

Jan 29, 2009

I often use the Crop Tool to get part of an image to print at actual size.

For example, Crop: Width 7cm @ Resolution 600 pixels/inch (same as my
printer), then select a known width of 7cm then crop and print.

I figure there must be a way without actually cropping the image, perhaps by selecting the known dimension.

View 22 Replies View Related

Photoshop :: Resizing Images In CC Without Changing Actual Image Size

Sep 17, 2013

I have a problem on resize images. How to resize the images from 72dpi to 300dpi without changing the image size in Photoshop CC? It enlarges the images or pixels, but i just want the pixel to stay the same.

View 2 Replies View Related

Paint.NET :: How To Measure Length Using Grid And Viewing Image In Actual Size

Jan 15, 2014

I'm using paint.net ver. 2.6.

I'm trying to measure length using the grid and viewing the image in its "actual size", but 'm getting a wrong value (e.g. 3cm instead of 1cm).
 
Is there a correct way to measure length in paint.net?

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Printed Image Darker Than Photoshop Prints

Jul 12, 2013

Tried the same image printed using corel and Photoshop. same setup: let software handle color, color off in printer, same profiles and settings otherwise. the corel print is a bit darker and some colors are slightly different than the same image printed thru Photoshop.

I usually print designs created in corel as there is added text and graphic elements. Can't print those using PS. just odd there is noticeable color variations.

View 4 Replies View Related

AutoCad :: Make Paper Size And Actual Plot Size Same?

Jul 7, 2011

I have tried numerous times to make my paper size and actual plot size the same. My paper size is 24 x 36 but for some reason it rotates the paper and the output is 36 x 36, every time! When I look at it on the preview, it looks correct but then the paper comes out with a foot of paper at the top of the drawing. I've created new page sizes, etc.

View 9 Replies View Related

Photoshop :: CS5 Not Printing Actual Size?

Sep 3, 2012

I have created a document in photoshop sized 8.5x11, the same size as my printer paper, at 300dpi.  I am using the ruler guidelines onscreen to make an image 6 3/4" wide, but it is printing out too small at 6".
 
I am not measuring onscreen by putting an actual ruler up against my screen, I am using the photoshop ruler (so I am sizing according to the 6 3/4" ruler in photoshop, even if it is 8" on my screen)
 
In the print settings, I uncheck "scale to fit media" and "center image".

View 1 Replies View Related

Photoshop :: Actual Size And Print

Sep 28, 2008

I have an image that is set to 1 inch by 2 inch.

Why at 100 % size does it appear much larger than this?

Also if I print the image it is not 1 inch by 2 inch.

View 1 Replies View Related

AutoCad :: Can't Print To Actual Size

Jun 26, 2012

I have Acad V14 and limited experience

I draw the surface of a pillow block which is 90mm x 45mm and want to print it actual sixe to use it as a pattern but no matter what I cant printing to actual size

View 9 Replies View Related

AutoCad :: How To Get Drawing In Actual Size

Apr 30, 2012

I imported an autocad drawing and it is 1:1 but the dimension are not the actual size. How do i correct this? The dimension shown is 42.31

View 8 Replies View Related

Illustrator :: Set Actual Character Size?

Oct 19, 2012

When using the type tool in Illustrator, setting the font size to 150mm give me a character size of 107,373mm and in the H value window it says the size is 185,15mm wich mean that none of the sizes is actually correct when using text and for me that is usless because I get drawings with spesific text hight and length.

View 8 Replies View Related

Photoshop :: Copy And Pasting At Actual Size

Jan 13, 2013

how to copy and paste a portion of a document open in photoshop into another document that is open in photoshop?
 
i have never been able to figure this out despite trying to do it from time to time and i basically cannot figure out if this is dependent upon actual images size, resolution, the size that the various images are on the screen etcetera, etcetera.
 
i am not even sure what other questions to ask except that i guess i could avoid all of this if i could copy a section of an image and then paste it into another document in a way that would give me the ability to RESIZE the incoming paste.
 
i basically want to get a logo into another document in a way that i can size and orient it so it looks good graphically...

View 7 Replies View Related

Photoshop :: Files Don't Open In Actual Size

Aug 13, 2012

When I open files in Photoshop they don't open in their actual size. Guess it's connected to their large screensize. But before working with them I always zoom them to actual 100%. Force Photoshop open automaticly in 100%?

View 3 Replies View Related

Photoshop :: How To Show Actual Print Size

May 6, 2013

I was watching a video about Photoshop and the pro broached the subject of how to set your PS preferences, so that you get a true representation of your documents print size. Seems this was a topic a while back and I'm not sure it was ever answered. Here is an explanation and the fix.

Seems that Adobe sets the default for screen resolution in Preferences/ Units and Rulers to 72ppi. Today's monitors are usually more than that, so when you tell PS to show you Print Size, it's going to show you something less than what it actually is. To fix this is actually pretty simple. Here's how.

1. Create a new document 9" x 9" @ 300ppi, use white for the background color.
2. In your zoom mode activate Print Size
3. Grab a tape measure and carefully measure what your seeing on the screen. If it is not 9x9, then your setting is not set properly in Preferences/Units and Rulers.
4. More than likely your measurement is smaller by a good bit. At this point, create a correction factor by dividing 9 by the actual measurement.
5. Then, in the Preferences as previously described, if 72ppi, multiply by the factor you just created and enter it exactly (not rounded) to the decimal point.

Now, when you ask PS to show Print Size it will show you the actual, not something less.

View 9 Replies View Related

Photoshop :: How Do I Print Images Actual Size

Sep 24, 2007

I work with images of jewelry. I need to be able to make them actual size with out distorting the image. I have tried creating a canvas that is the size of the image I need, but cannot get the picture to fit perfectly in it with out distortion. Resizing the original does not work, because of course I have to constrain proportions.

View 5 Replies View Related

Revit :: Actual Printing Size On The Screen?

Oct 16, 2012

Actual printing size on the screen,
 
I’m wondering if there is a tool on the Revit that enables displaying the actual printing size on the screen. This feature is quite useful as we can see exactly how the drawing will precisely looks like on the paper.
 
For example, if I need to print with a scale of 1:200, then is there a tool that displays the actual size on the screen. Other software, like ArcGIS, has this feature.
 
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 4 Replies View Related

Lightroom :: How To Display Actual Size Of Brushes And Pen

Jul 29, 2013

I've used Photoshop for 13 years now and slowly over the years, the subsequent versions have had a problem with the brush cursor maintaining the correct size. Now, with CS6 the problem has become unmanagable! I used to have to go fairly often to preferences to reselect the option to display the actual size of my brushes and pens etc. While a pain, I could deal with it because it only happened once in a while. Now with CS6 it is in a permanent crosshairs mode and will not change no matter what prefs I select! Obviously this makes the program significantly less useful. I'm on a new Mac with Mountain Lion.

View 2 Replies View Related

Photoshop :: How To Resize View To Actual Size Of Graphic

Feb 26, 2013

I have been creating different designs in various sizes,  such as 4x6 and 12x12 or letter size. What I need to know is how to view the design in photoshop at those sizes without having to hold a ruler up to my computer? A few years ago I was told of a shortcut key, I think it was Ctrl+1, to make it full-size. It turned out not to be accurate advise. I learned this after creating fifty 4x6 designs and after they were printed I discovered they print was way too small. I need a more accurate and scientific way to have Photoshop resize the view to the actual size of the graphic so I can span the design and confirm everything is legible and visiable before I print it.

View 2 Replies View Related

Photoshop :: Saved Output Sized Vs Actual Size

Oct 3, 2012

I'm using photoshop cs6 on windows 7.
 
Ok so my image size is about 24x20 and when I save the output of the image is almost half the size. The project has a lot of details so it looks like a big blob shrunken down to half size.  I've played around with the settings for hours in save for web option and I get the same results. how to save so the output is nearly the original size, or just so you can see the details!

View 2 Replies View Related

Photoshop :: Banners Images Not Shown As Actual Size

Nov 6, 2013

I have a very uncommon problem that , when i update my banner of website which has photo of handmade leather messenger bag and leather backpack and wit size of 1343px x 460 px  and i make exact same size image in Photoshop using 72 dpi  and after uploading and updating my website banner get cropped automatically.

I tried everything in code of my website but every time i change it crops the image.  what resolution i must take to make my image say similar as source.  My website is

[URL]........

View 1 Replies View Related

Paint.NET :: Scanned Project - Cannot Print In Actual Size

Apr 22, 2013

When scanning my project, the work appears on screen in actual size, but for the life of me I can't print in actual size, only full page A4.

View 6 Replies View Related

AutoCad 2D :: How To Get Scale Right To Print Object At Its Actual Size

May 24, 2013

I have been looking through a ton of threads and can only find half an answer to what I'm looking for: When I draw in mm, I have to set the scale of the viewport to 1:30 or somewhere in that range. But in reality, the object that Im drawing isn't 1/30th of the size that it prints. How do I get the scale right to print the object at its actual size? cad 2013

View 9 Replies View Related

Illustrator :: Does Not Display Actual Size Of Objects Selected

Jan 28, 2014

I work at a university and have logos shared with me from other designers, most of which are working on Macs and I'm working on a PC. When I open the logo and select all, the size displayed is 227.5417 inches x 227.5417 inches. The last one I received, the actual size of the logo was 2 inches x 1.75 inches. How do I get Illustrator to display the actual size of the logo?

View 7 Replies View Related

GIMP :: Making Collage Printed On A3 Size

Sep 24, 2012

I am trying to make a collage which will be printed(=300 DPI) on A3(420 × 297 mm) sized paper. The images I want to take elements from for my collage are all different in size and DPI. When these elements come together they should be similar in size in order to create a new believable scene. 1 element can't be absurdly large in relation to another.

So what I did for my first image (size of 3456 × 2304 pixels, a print-size of 1219,20 × 812,80 mm and DPI 72 × 72) was increase the DPI to 600 in order to obtain a smaller printsize - reducing it to 146,30 × 97,54 mm - cut-out the elements I need and import them into my A3 document. This gave me the size I need for my elements.

However when I try to take elements out of the second image (size of 1500 × 1125 pixels, a print-size of 211,67 × 158,75 mm and DPI 180 × 180) - which I leave unchanged because 211,67 × 158,75 mm is about the size I need for the elements - and place them into the A3 document they are too small. Same story for the third image (size of 2400 × 1600 pixels, a print-size of 304,80 × 203,20 mm and DPI 200 × 200)

View 6 Replies View Related

AutoCad :: Printed Drawing Size To Fold Into A4

Mar 3, 2008

Which size do you use to print off a drawing that can be folded into A4 size?

View 9 Replies View Related

AutoCAD Civil 3D :: Actual Catch Basin Part Size

Mar 12, 2012

When i am laying out a storm sewer pipe network  with structure sizes that vary i notice no matter what the structure size it always appears the same size in plan view. How to fix this or is this one of those things that its always shown the same size for all and only different in profile view.

View 2 Replies View Related

AutoCad :: How To Change Units To Match Actual Desired Size

Mar 13, 2012

I've received a dwg file from someone and I want to print it at scale 1:50 on A0 paper. However, I'm struggling creating the right scale.

My problem starts with the fact that measuring lines in the diagram does not produce values that match the actual size. E.g., I have a wall of size 390, but measuring it shows 621.

Is there any way to change the units to match the actual desired size?

Then, I find it tricky to create the right scale for printing (people will get the paper and use a ruler to measure distances, so accurate scale is important). If I cannot change the units, I guess I need a different scale than 1mm=50units. So I tried 1mm=8units, because 7.8mm should measure as 390cm in 1:50 ruler. But this is not very accurate.

View 3 Replies View Related

AutoCAD Architecture :: Getting Steel Beam Size (Actual Height)

Mar 30, 2011

I'm trying to create a steel beam schedule, that include the bearing height of the beam, but I need to get the actual height of the beam so that it can be plugged into the formula.

AEC Design Services

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved