I often use the Crop Tool to get part of an image to print at actual size.
For example, Crop: Width 7cm @ Resolution 600 pixels/inch (same as my
printer), then select a known width of 7cm then crop and print.
I figure there must be a way without actually cropping the image, perhaps by selecting the known dimension.
I have been looking through a ton of threads and can only find half an answer to what I'm looking for: When I draw in mm, I have to set the scale of the viewport to 1:30 or somewhere in that range. But in reality, the object that Im drawing isn't 1/30th of the size that it prints. How do I get the scale right to print the object at its actual size? cad 2013
View 9 Replies View RelatedI have imported a model from C4D using the FBX importer, and everything was fine, except that it was way to big. I scaled it down to a more "manageable" size. So the scale reads 0.01 (All axis).
My question is, is there any way I can make Scale reflect the actual object size? Maya know these numbers, because they are present when using the universal manipulator tool. I would like it if the scene scale could reflect the real size of the object. So if i create a new object, the size relates to the size of the existing objects in the scene?
Can i put the real scale on the object, and then just "downscale the scene", so that the objects don`t appear giant? Like scene scale or something?
What is the difference between Actual Pixels and Actual Print Size?
View 15 Replies View RelatedI have a problem on resize images. How to resize the images from 72dpi to 300dpi without changing the image size in Photoshop CC? It enlarges the images or pixels, but i just want the pixel to stay the same.
View 2 Replies View RelatedPrinted some rectangle that are 7.5 x 14.5 inches wide on the corel page on the monitor, but they did not actually print 7.5, they were about 1/4 inch smaller! the 14.5 dimension was fine. got to measuring other images I have printed and some are perfect, some are off.
View 1 Replies View RelatedI'm using paint.net ver. 2.6.
I'm trying to measure length using the grid and viewing the image in its "actual size", but 'm getting a wrong value (e.g. 3cm instead of 1cm).
Is there a correct way to measure length in paint.net?
How do you scale a layer proportional to the image size?
I want to scale a layer so that it's 10% of the width of the full image. It's going to be part of an action, so I can't just do the math, and do it manually.
I have tried numerous times to make my paper size and actual plot size the same. My paper size is 24 x 36 but for some reason it rotates the paper and the output is 36 x 36, every time! When I look at it on the preview, it looks correct but then the paper comes out with a foot of paper at the top of the drawing. I've created new page sizes, etc.
View 9 Replies View RelatedWhat is the difference between the outcome of using the new content aware scale versus just going ahead and resizing the image? Or is this a matter of preference?
View 1 Replies View RelatedWhen i enlarge the size of an image (using free transform, or scale) in photoshop CS2, the resized image gets blurred (or smudged) as soon as i've accept the larger size. How can i prevent this from happening? I'm trying to work with few pixels, and when it smudges the edges i get tons of colors i don't want.
View 5 Replies View RelatedI really can't believe that it is not possible in Corel Draw.
1) How to define size of object, for example rectangle before I actually draw first time the custom shape of the rectangle? So far I draw any rectangle and then change the size which is not professional way I guess, because it causes many problems. (like for example I cant change ratioif it is going to be rectangle with rounded corners)
2) Very often in my work I need to change % size of my artwork or object because a client wants to have something 80% size or 20% smaller. I found it impossible to do because CorelDraw keeps remember all % transformations since original size was created. Now, provided that my 1) problem has no solution we end up in such a situation:
- my first rectangle is always NOT in correct, precise size
- when I amend the size it has a correct size but already has different than 100% value.
- Corel Draw forces me to choose: 100% value and not precise size or correct size and for example 113,9%
I completely don't understand what for is the feature that remembers the original size, it's not so needed in practice especially that IT IS A VALUE BASED ON ALWAYS WRONG INITIAL SIZE. Is it so difficult to place a button next to % value called RESET to 100%? (without going back to initial size of course) I know there are tricks for exampleto group the object temporary with other object but it is not a proper way, is it?
Graphic Designer, Web designer and playing with Video and Audio mixing and editing as well ;-).Working for Large Format Printing company Carrick Signs.
I want to scale down the size of each image in a set of 125 photos, to save storage space in my computer. How can I do this other than one at a time?
View 1 Replies View RelatedI'm trying to import some JPEG images into illustrator to add a very simple vector graphic over the top of some of them. The prolem is that when I import the images the don't appear at the same resolution as they should be. The images are all 600px x 400px 72dpi but when I import them into illustrator the software is readinig them (via the w & h dimensions in my illy browser) as 144px x 96px. The odd thing is that when I export them from Illustrator they're showing as 600x400px images again. Is this somethign to do with my import settings or preferences?
View 10 Replies View RelatedI have created a document in photoshop sized 8.5x11, the same size as my printer paper, at 300dpi. I am using the ruler guidelines onscreen to make an image 6 3/4" wide, but it is printing out too small at 6".
I am not measuring onscreen by putting an actual ruler up against my screen, I am using the photoshop ruler (so I am sizing according to the 6 3/4" ruler in photoshop, even if it is 8" on my screen)
In the print settings, I uncheck "scale to fit media" and "center image".
I have an image that is set to 1 inch by 2 inch.
Why at 100 % size does it appear much larger than this?
Also if I print the image it is not 1 inch by 2 inch.
I drag the graphed box to scale an image down (or up) and after clicking "scale" the image size decreases but the original box is there (original size). Why?
View 5 Replies View Relatedhow to copy and paste a portion of a document open in photoshop into another document that is open in photoshop?
i have never been able to figure this out despite trying to do it from time to time and i basically cannot figure out if this is dependent upon actual images size, resolution, the size that the various images are on the screen etcetera, etcetera.
i am not even sure what other questions to ask except that i guess i could avoid all of this if i could copy a section of an image and then paste it into another document in a way that would give me the ability to RESIZE the incoming paste.
i basically want to get a logo into another document in a way that i can size and orient it so it looks good graphically...
When I open files in Photoshop they don't open in their actual size. Guess it's connected to their large screensize. But before working with them I always zoom them to actual 100%. Force Photoshop open automaticly in 100%?
View 3 Replies View RelatedI was watching a video about Photoshop and the pro broached the subject of how to set your PS preferences, so that you get a true representation of your documents print size. Seems this was a topic a while back and I'm not sure it was ever answered. Here is an explanation and the fix.
Seems that Adobe sets the default for screen resolution in Preferences/ Units and Rulers to 72ppi. Today's monitors are usually more than that, so when you tell PS to show you Print Size, it's going to show you something less than what it actually is. To fix this is actually pretty simple. Here's how.
1. Create a new document 9" x 9" @ 300ppi, use white for the background color.
2. In your zoom mode activate Print Size
3. Grab a tape measure and carefully measure what your seeing on the screen. If it is not 9x9, then your setting is not set properly in Preferences/Units and Rulers.
4. More than likely your measurement is smaller by a good bit. At this point, create a correction factor by dividing 9 by the actual measurement.
5. Then, in the Preferences as previously described, if 72ppi, multiply by the factor you just created and enter it exactly (not rounded) to the decimal point.
Now, when you ask PS to show Print Size it will show you the actual, not something less.
I work with images of jewelry. I need to be able to make them actual size with out distorting the image. I have tried creating a canvas that is the size of the image I need, but cannot get the picture to fit perfectly in it with out distortion. Resizing the original does not work, because of course I have to constrain proportions.
View 5 Replies View RelatedSo we've been sent a DWG file for a large site, that includes a massive aerial (TIF) image.
At this point it's too large to even work with so I'd like to scale it down (proportionally, so it will still maintain the same aspect ratio).
For simplicity sake, lets say the image is 15,000 x 15,000 and I want to scale it down to 5,000 x 5,000.
The problem is that AutoCAD seems to use that pixel size to determine the actual scale, so when I updated the new (smaller) image, it was also 3x smaller in the world.
How do I scale down the image independently of the size so it will still maintain the same scale in the CAD world? (I'm a 3D guy so this is akin to scaling down a texture, yet having the plane its projected on maintain its original scale.)
Is there any way I can scale images down in size, whilst keeping the quality of the image? I am a Media teacher having to use this software with the class and they must have high production values for their controlled assessment. However, I do not know how to get around the problem that all the work is predominantly blurred because students have scaled down the pictures resulting in horrendous blurring.
View 3 Replies View RelatedI have been creating different designs in various sizes, such as 4x6 and 12x12 or letter size. What I need to know is how to view the design in photoshop at those sizes without having to hold a ruler up to my computer? A few years ago I was told of a shortcut key, I think it was Ctrl+1, to make it full-size. It turned out not to be accurate advise. I learned this after creating fifty 4x6 designs and after they were printed I discovered they print was way too small. I need a more accurate and scientific way to have Photoshop resize the view to the actual size of the graphic so I can span the design and confirm everything is legible and visiable before I print it.
View 2 Replies View RelatedI'm using photoshop cs6 on windows 7.
Ok so my image size is about 24x20 and when I save the output of the image is almost half the size. The project has a lot of details so it looks like a big blob shrunken down to half size. I've played around with the settings for hours in save for web option and I get the same results. how to save so the output is nearly the original size, or just so you can see the details!
I have a very uncommon problem that , when i update my banner of website which has photo of handmade leather messenger bag and leather backpack and wit size of 1343px x 460 px and i make exact same size image in Photoshop using 72 dpi and after uploading and updating my website banner get cropped automatically.
I tried everything in code of my website but every time i change it crops the image. what resolution i must take to make my image say similar as source. My website is
[URL]........
I have Acad V14 and limited experience
I draw the surface of a pillow block which is 90mm x 45mm and want to print it actual sixe to use it as a pattern but no matter what I cant printing to actual size
I imported an autocad drawing and it is 1:1 but the dimension are not the actual size. How do i correct this? The dimension shown is 42.31
View 8 Replies View RelatedWhen using the type tool in Illustrator, setting the font size to 150mm give me a character size of 107,373mm and in the H value window it says the size is 185,15mm wich mean that none of the sizes is actually correct when using text and for me that is usless because I get drawings with spesific text hight and length.
View 8 Replies View RelatedActual printing size on the screen,
I’m wondering if there is a tool on the Revit that enables displaying the actual printing size on the screen. This feature is quite useful as we can see exactly how the drawing will precisely looks like on the paper.
For example, if I need to print with a scale of 1:200, then is there a tool that displays the actual size on the screen. Other software, like ArcGIS, has this feature.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I've used Photoshop for 13 years now and slowly over the years, the subsequent versions have had a problem with the brush cursor maintaining the correct size. Now, with CS6 the problem has become unmanagable! I used to have to go fairly often to preferences to reselect the option to display the actual size of my brushes and pens etc. While a pain, I could deal with it because it only happened once in a while. Now with CS6 it is in a permanent crosshairs mode and will not change no matter what prefs I select! Obviously this makes the program significantly less useful. I'm on a new Mac with Mountain Lion.
View 2 Replies View Related