AutoCAD LT :: Auto Updating Dimensions In Viewports
Aug 13, 2012
recently switched over to AutoCAD 2013 from 2012. A time svae feature I used extensively in 2012 was the auto update feature for dimensions. My workflow is to set up a base plan then xRef that plan to my various sheets where needed in viewport in paperspace. If I set my DIMASSOOC to (2) and then dimension in paperspace I was able to auto update the dimensions with any changes by simply double clicking in the viewport window then switching back to paperspace. I have spent some time researching this feature today without any answers. Would this be just a bug in the new version or is it a feature that has been disabled?
View 4 Replies
ADVERTISEMENT
Jul 23, 2012
I have some aligned dimensions in model space - they look ok, text is oriented according to WCS. Also I have some viewports with UCS (I used commands UCS, PLAN) where dimensions look wrong, text is not oriented correctly. Is it possible to "update" dimension in viewport to orient text as in model space?
Programmatically created dims in viewports oriented as in model space, not considering current UCS.
View 8 Replies
View Related
Jul 23, 2012
I have some aligned dimensions in model space - they look ok, text is oriented according to WCS. Also I have some viewports with UCS (I used commands UCS, PLAN) where dimensions look wrong, text is not oriented correctly. Is it possible to "update" dimension in viewport to orient text as in model space?
Programmatically created dims in viewports oriented as in model space, not considering current UCS.
View 2 Replies
View Related
Feb 23, 2012
I have a viewport with two loading bays about 50m apart. I want to use a higher scale to make it more visible but wont fit on the page. I have seen this before but unsure as to how to do it, I want to put a breakline in the viewport so the scale can be bigger but have the same dimension distance.
View 3 Replies
View Related
Feb 21, 2012
Any settings that will automatically check changes to an xref and re-load it instead of just telling you "an xref needs reloading"? the problem is occuring when i go to publish and i end up with out-dated info because acad doesn't auto-refresh the xrefs.
View 7 Replies
View Related
Dec 12, 2013
I have two viewports, one that is not rotated at 1:50 scale, the other rotated at 1:20 scale, and using associative dimensioning, therefore viewing the same model object with two associative scales. The rotated viewport is showing the dimenions upsidedown since it is rotated more than 180deg. If I modify the dimension properties to Left to Right instead of Right to Left, it rotates my other unmodified viewport. The only way right now to have the dimensions showing properly, is to print the first pages with the unmodified viewports, then modify the dimension properties, and then print the rotated viewport pages.
View 0 Replies
View Related
Dec 28, 2012
Here is a problem I am having in autocad 2011 and is very annoying dimentioning 3d modes in paper space the viewport line obscures any line in layout space that corsses it I have tried all the usual tricks send above bring to fron etc Ive frozen and turned off the viewport line etc nothing works!!
it only happens with 3d objects what I do when detailing something is keep the 3d model then create flatshots of the object i need to detail thendimentions the flat shot objects however if any single 3d element is in themodelspace I get this obscured dimention crap it is funny i dont recall this being a problem in version 2006 am I missing something or is autocad 2011?
OK I worked around this by making sure the viewport for the object I am detailing is set to 2D wireframe however i would like to add some notes to the 3d model through the viewport without turning the model from conceptual to wireframe.
View 9 Replies
View Related
Jul 19, 2012
I am currently updating company drawings from one template to another. I am using the copy and paste method. What I am noticing is that when I copy the part and the dimension from the original drawing ( all in 3 place dimensioning) to the new template Autocad is changing the dimensions to 4 place dimensions. First question is why is this happening and second question is can it be stopped?
View 4 Replies
View Related
Aug 20, 2013
A few weeks ago I created an iPart for a custom flange with various sizes, today I have added a new row to the family for a new size. Most of the dimensions work fine but two of them are not translating to the sketch/model from the table.
All dimensions that are working correctly lie on one sketch and the dimensions that are not changing correctly are on a seperate sketch.
The flange is made from a single revolve and then the bolt holes were added seperately as a single extrusion which was then patterned.
The dimensions are correct on the family table but are incorrect when I go into the particular parts parameters.
(I am using IV 2014)
View 8 Replies
View Related
Jun 11, 2012
I am using 2012 autoCad. I have created an external MS access database in 2010. I want to map some fields like Polyline areas to DB field. DBConnect wasn't that much usrful to me for external databse.(Or I might be missing something).
Is there anyway that I can map AutoCAD-2012 Polylines to External database field so that updating polyline auto updates the database??
View 2 Replies
View Related
Nov 28, 2012
I've completed my drawing (Autocad architectural 2012) and set-up my multiple view-ports (at 1:50 and 1:5 scale) on my title-block.
I'm now going to add my text and dimensions im model space....and that's when the problems start!
I've created text and dimensions in annotative style.
The issue I have is when I change annotation scale from 1:50 to 1:5 my text and dimensions in model space automatically changes (as can be seen on attachment) to a huge scale but is perfect in layout view for differing scales.
View 9 Replies
View Related
Jul 19, 2013
I am having trouble with dimensions disappearing in the drawing when I update my model.
I add the correct dimensions then when I update my model, all dimensions on the drawing disappear and I have to make them all again.
A little more info:
I am using the tube and pipe feature to drawing tubing inside of an assembly.
Process:
1) I draw the tubing routes and populate them (to show an actual swept tube)
2)Right click on the newly created route in the explorer and open the tube.
3)File->new->drw.
4)Add necessary dimensions to the tube drawing.
5)Save and close drawing
Up until this point everything is fine.
6)Edit the tube route in the assembly and save
7)Upon opening the drawing of that tube route ALL dimensions have disappeared.
View 9 Replies
View Related
Mar 22, 2014
I updated to Illustrator 17.1, and now my image links no longer auto-update after they have been edited in Photoshop. As most should know, this has long been a feature: tweak an image file in Photoshop, save it (same file name), and Illustrator will recognize the image has been edited and ask if you want to update it automatically. Hit 'Return', as 'Okay' is the default dialog button action, and image updated: one step. Without auto-update, user must manually access link palette, select edited image link, and 'Relink' the image ('Update Link' unavailable here now as well): three-plus steps (including identifying and selecting image file after 'Relink').
View 2 Replies
View Related
Jun 27, 2012
I'm using Auto Architecture 2013 and the dimensions are always coming in on layer A-Anno-Dims; which is fine for plans. I also use dimensions for reflected ceiling plans as wells as other plan options. I want to set the dimension on the current layer, but no matter where I choose the command (ie command line, ribbon, toolbar, tool palette) it comes in on the same layer. Can I turn this option off? Is there a variable that I can chage?
View 9 Replies
View Related
Mar 1, 2012
Is it possible to auto-reattach dimensions programmatically?
I have an assembly that I'm suppressing/unsuppressing parts in and my drawing dimensions keep getting orphaned. I discovered the "Preserve Orphaned Annotations" option, which keeps them from disappearing on me. I can then reattach the dimensions via the design doctor, but who wants to click the doctor 6 times for 20+ dimensions?
View 4 Replies
View Related
Apr 29, 2012
I am working for a company right now and we design cases. The design process involves creating a rectangle of length and width, extruding it to height and than building a case around it. the sides are 20mm offset from the item itself and the top and bottom are 27mm offset from the item itself.
Is there any way I can avoid having to repeat what im doing over and over every time i create a case. We also have standard latches and handles. The top is also standard being 60mm panel height. There is also standard for spacing between the top panels and bottom panels to allow for tongue and groove.
View 7 Replies
View Related
Dec 19, 2013
I have used annotative text and selected yes for match orientation to layout for the text. In the viewport it is rotating automatically with the view, however the boxes around the text do not rotate as well. Is there anyway to automate this?
The Client requires a key plan which has all the pipe data on it. The key plan is oriented in one direction. Then for the plan & profile drawings, the plan is oriented in another direction. I don't want to have two create two sets of text (one for the key plan and one for the plan/profile drawing). How can I use one set of text and make it work in the key plan and for all the plan/profile drawings? Image is attached.
View 2 Replies
View Related
Mar 16, 2012
Every thing was just fine but at particular moment I noticed that viewports are not updating when I'm working. Sometime there is note ''inactive'' so to see changes I need to click on viewport to see them. I just can't work
p.s. In viewport configuration/rendering method/apply to: All viewports. I tried to google.
View 1 Replies
View Related
Sep 4, 2012
I have just installed 2012 and have drawn a 3d model. In paperspace i have a couple of viewports , all nicely set out at 1:5 scale. then i click in another viewport and bam, all the other viewports change scale (zoom out) and orientation. is there some system variable that i have overlooked?
View 9 Replies
View Related
Aug 23, 2011
I have a lot of sheet DWGs with a single layout in each. The layouts have several viewports into model space.
Is there a way to export out the layout tab where the viewport contents have been converted and placed into the layout space?
Ideally, I'm hoping to basically convert the viewport heavy paperspace into a dumb model space layout.
View 3 Replies
View Related
Mar 20, 2013
I am using Mech 2007. I have created a template to use with new drawings, and want to know if there is a way to update all the drawings at the same time when updating the template.
View 3 Replies
View Related
Oct 21, 2011
The code I'm using is supposed to go through all of the layouts and freeze the specified layer in the single viewport that is defined on that layout. It works for some viewports, but not for others. A "List" of the objects show the viewports are the same. I have a LiSP routine that gets me more info about selected objects. The first is a viewport that does not freeze the specified layer, the second does freeze the layer. Here is the code I'm using:
Public Sub FreezeNewLayerInVPs(ByVal pageNumber) Dim doc As Document = Application.DocumentManager.MdiActiveDocumentDim db As Database = doc.Database Dim layerToFreeze As String = "DETAIL_" & pageNumber Using tr As Transaction = db.TransactionManager. Start Transaction( )Dim layTable As LayerTable = DirectCast(tr.GetObject(db.LayerTableId, OpenMode.ForRead),
[code]...
View 1 Replies
View Related
May 18, 2009
I have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies
View Related
Dec 4, 2012
I was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies
View Related
Mar 16, 2012
I typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
View 8 Replies
View Related
Sep 17, 2013
Is there any way I can make exploded dimensions in an old drawing become live dimensions again.
View 3 Replies
View Related
Aug 22, 2012
is there a way to lock the dimensions to aligned dimensions...or a key i could hold while dimensioning that would do that..
i have to dimensions a drawing where theres a lot of aligned dimensions to put and to do it manualy each time takes forever...
Product Design Suite 2013
View 9 Replies
View Related
Oct 9, 2013
Also be sure to pick the 'aligned dimension' method and not the 'linear dimension'. I hope that works in Revit as it does in AutoCAD.
View 9 Replies
View Related
Jul 8, 2013
I was using these tool on a lot of images, because they often seemed to vastly improve them, making the colors pop on otherwise somewhat dull ones, and getting rid of unwanted color casts..
Later though I noticed that it is often at the cost of burning out hightlights in some areas beyond salvation.I also find shadow /highlight sometimes does this also.
Then I tried to protect some small areas with a mask before proceeding, but it seems that I can't find information on just painting a mask, but only videos with much more complex adjustment such as the Russel Crow or Lynda ones with maintaing hair detail while superimposing images, which is way beyond what I need in these cases.
If I try the wand to select and inverse I get unnatural looking divisions. Is it a matter of feathering to the right extent?
View 4 Replies
View Related
Apr 25, 2012
Yes, I'm probably the only person on the planet that wants this, but I liked how the Auto Tone auto adjusted the Exposure slider (ONLY!) and left all the other sliders at zero in the Lightroom 4 beta.
Is there a way to write a preset that returns that behavior?
View 2 Replies
View Related
Aug 3, 2007
I have just moved from 7.0 to CS3 (and PC to Mac) and am currently trying to get to grips with the new features! Once which I love is the auto-align and auto-blend feature(s). My question is, is there any way to control how these features work? I have seen on some web sites people talk about 'fuzziness' sliders where you can control that if an object (pixels) appear in X% of the photos they should/shouldn't be included in the final image but I cannot find these.
My intention is to use these features to take photos of monuments and have the people who are moving about removed from the final image (I guess it's the auto-align that would do this.) I tried a test and took a number of photos at home but I kept moving one object around (a pen.) The pen appears in all the images but in a different location so it always appears in the final image. When I tried auto-align with a stack that included one image without the pen, the pen was removed from the final image. Given the first scenario (i.e. the object is in all the images but in a different location) is there any way of automatically removing it using auto-align or would this have to be a manual process? In the real world, it would be possible to take a photo of a monument with people in different locations but it would be much harder (or take a long time) to take one where at least one person was not in all the photos (there's always someone loitering.)
View 1 Replies
View Related
