AutoCad 2D :: Multiple Rotated Viewports With Upside Down Dimensions?
Dec 12, 2013
I have two viewports, one that is not rotated at 1:50 scale, the other rotated at 1:20 scale, and using associative dimensioning, therefore viewing the same model object with two associative scales. The rotated viewport is showing the dimenions upsidedown since it is rotated more than 180deg. If I modify the dimension properties to Left to Right instead of Right to Left, it rotates my other unmodified viewport. The only way right now to have the dimensions showing properly, is to print the first pages with the unmodified viewports, then modify the dimension properties, and then print the rotated viewport pages.
I've completed my drawing (Autocad architectural 2012) and set-up my multiple view-ports (at 1:50 and 1:5 scale) on my title-block.
I'm now going to add my text and dimensions im model space....and that's when the problems start!
I've created text and dimensions in annotative style.
The issue I have is when I change annotation scale from 1:50 to 1:5 my text and dimensions in model space automatically changes (as can be seen on attachment) to a huge scale but is perfect in layout view for differing scales.
I was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
I was sent the floor plan of a building and I am drawing the rcp. I am trying to add some dimensions but they are upside down. The ucs is at world and mirrtext is at 0. I don't know what to do now!
I am working on a project that has around 6 different roads, all at different angles from one another. The problem I have is when I start to create the lay-outs, I use a rotated viewport so that the roadway will be horizontal across the page. I then rotate the text so that it will be horizontal or at 90 º within the viewport. This has worked fine in the past.
With this project I have multiple areas that are sharing 2 or 3 different viewports, therefore, the text alignment for one does not match the other.
Is there a way to associate the alignment of the text to the viewport? Or will I have to copy the drawing multiple times (one for each viewport)?
Using Map 2013.It seems that when a viewport is rotated more than 45 degrees in paperspace, the labels disappear.
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025-1629) Language: English (Regional Setting: English) System Manufacturer: LENOVO System Model: 6075CTO BIOS: Lenovo ThinkCentre BIOS Ver 2RKT38.0 [code]....
i was asked to assist with plotting some coordinated on a drawing, the catch is i need to re orientate the UCS with Y+ at the top of the screen, X+ to the right, Y- to the bottom and X- to the left..
I managed to get this part right, that was the easy part.....
However when i went to put any Dimension or even Text on the drawing it was Backwards and Upside Down.
I have added a small screenshot for reference ....
I have some aligned dimensions in model space - they look ok, text is oriented according to WCS. Also I have some viewports with UCS (I used commands UCS, PLAN) where dimensions look wrong, text is not oriented correctly. Is it possible to "update" dimension in viewport to orient text as in model space?
Programmatically created dims in viewports oriented as in model space, not considering current UCS.
I have some aligned dimensions in model space - they look ok, text is oriented according to WCS. Also I have some viewports with UCS (I used commands UCS, PLAN) where dimensions look wrong, text is not oriented correctly. Is it possible to "update" dimension in viewport to orient text as in model space?
Programmatically created dims in viewports oriented as in model space, not considering current UCS.
I have a viewport with two loading bays about 50m apart. I want to use a higher scale to make it more visible but wont fit on the page. I have seen this before but unsure as to how to do it, I want to put a breakline in the viewport so the scale can be bigger but have the same dimension distance.
I have one layout. On that layout I want to have 2 viewports. I also have ssay block A and block B I want to insert.I would like Viewport1 to display block A and viewport 2 to display block B.
What happens to me is when I created Viewport 1 and inserted block A. I go on to create viewport 2. But viewport 2 displays only block A, which I cannon delete to insert block B.
recently switched over to AutoCAD 2013 from 2012. A time svae feature I used extensively in 2012 was the auto update feature for dimensions. My workflow is to set up a base plan then xRef that plan to my various sheets where needed in viewport in paperspace. If I set my DIMASSOOC to (2) and then dimension in paperspace I was able to auto update the dimensions with any changes by simply double clicking in the viewport window then switching back to paperspace. I have spent some time researching this feature today without any answers. Would this be just a bug in the new version or is it a feature that has been disabled?
Here is a problem I am having in autocad 2011 and is very annoying dimentioning 3d modes in paper space the viewport line obscures any line in layout space that corsses it I have tried all the usual tricks send above bring to fron etc Ive frozen and turned off the viewport line etc nothing works!!
it only happens with 3d objects what I do when detailing something is keep the 3d model then create flatshots of the object i need to detail thendimentions the flat shot objects however if any single 3d element is in themodelspace I get this obscured dimention crap it is funny i dont recall this being a problem in version 2006 am I missing something or is autocad 2011?
OK I worked around this by making sure the viewport for the object I am detailing is set to 2D wireframe however i would like to add some notes to the 3d model through the viewport without turning the model from conceptual to wireframe.
I wrote a program to separate drawings with multiple layouts into several drawings. The problem I'm running into is even though there is only one viewport in the layout.the program is finding two. One has the right viewcenter, width and height the other is wrong.
I am using ACAD LT 2012. I currently have 3 ucs viewports in my drawing. Each time I switch from one viewport to another using my left mouse button, the drawing regenerates. How do I stop this from happening?
I know that we can have precision movement within viewport using -pan. However that panning is limited to the active viewport, 1 at a time by double clicking in the viewport. Is there a way to apply -pan to a number of viewports, say I want to move all the model space irrespective of scale 300 mm to the west or 100 mm to the north in more than 1 viewport.
I am working on AutoCAD 2013LT and I tried to use multiple viewports in model space which is a new thing to AutoCAD (i think). Anyway I wasn't using it on the last version.
Under View Tab when I go to choose different Viewport configurations sometimes some of the views change to isometric view. I don't know how to change it back to 2d view.
They mension something about viewport control lables which should be in top left corner, but I don't see those in my viweports.
Is there a way to copy a viewport with all its layers setup from one drawing file to another drawing file?
I can copy the viewport and activate it, but the layers setup for that viewport goes to default. So it turns everything on.
I can't make a layer state in the old file and import in new file, because the new file does not have all the same layers. So not all my layers would be turned off in the viewport.
I am creating plan sheets and using the sheet creation tool. The plan sheets I am looking to make have stacked view, similar to a plan and profile sheet, only they have the horizontal alignment in both views.
I have a template set up with two viewports, but when I try to create the sheets it puts the same view frame in both of the viewports. Is there any way to set this template up so that I can have, lets say, STA 100+00 - 110+00 in the top viewport and then STA 110+00 - 120+00 in the bottom viewport. I understand that I can move the viewports once they are created, but I would rather have that done automatically. I am not sure if what I want done is possible with Civil 3D.
I am trying to learn Annotative text using multiple viewports. My question: I have text in Model space with Annotative scales to match two different viewports in layout space. Sometimes the text or dimensions for that matter appears in a different place in the two windows. What gives?
Every once and a while when I open up a dwg, autocad will load with what looks like two viewports in my model space tab. The bottom viewport is not clickable and the top viewport is very thin and is the one I am able to move around in. I would like to get this to stop.
I am currently working on a .DWG in Civil3D which has 12 viewports. This particular .DWG causes my computer to lag quite a bit. I was wondering if there was a way of combining viewports in paper space (i.e. taking areas from multiple viewports and displaying them in one viewport), or if I am stuck with the individual viewports? I am just looking to speed up the process, it takes a long time to load the .DWG and work within it, the problem happens to others as well.
.DWG info: Large area with many smaller sites (retention ponds and such) All sites must remain in the paper space layout (I've tried deleting viewports, and that does speed up the process, but again, I need to keep all sites intact).
Computer info: Windows 7 64-bit 8GB Ram Intel Core i5-3450 CPU @ 3.10GHz NVIDIA Quadro FX 1800
If I have UPSFOLLOW set to '1' when using multiple viewports in the workspace when I click from one viewport to another it refreshes the viewport that I'm leaving with the setting of the viewport I select. If I set UPSFOLLOW to '0' it doesn't happen. Is there a way of stopping this happening without having to keep changing the UPSFOLLOW setting i.e. have UPSFOLLOW set to '1' and the viewports not change when swapping them?
I have a few files with layouts that have multiple viewports where layers were frozen to get the desired display, the drawing was saved, yet everytime the drawing is re-opened those layers are on again. This is creating problems because I am batch plotting many drawings at once. The layers are not locked.
Any routine to re-size viewports in multiple layouts? We have to re-size viewports as they were created a little too small and are now spread across almost 1000 drawings in 18 dwg.
I'm creating a drawing set that has over 100 sheets with varying amounts of viewports on each sheet (from one to four). Each sheet is its own file, so there is only one layout per file. For each section of the drawing set, the viewports will have the same layer state.
Is there were a way to update the layerstate of each viewport through a batch LISP routine? This would save me DAYS in opening each file, importing the layer state, and restoring it for each viewport. It seems straight forward, but I have no idea where to start with batch routines.
I have just installed 2012 and have drawn a 3d model. In paperspace i have a couple of viewports , all nicely set out at 1:5 scale. then i click in another viewport and bam, all the other viewports change scale (zoom out) and orientation. is there some system variable that i have overlooked?
I have used annotative text and selected yes for match orientation to layout for the text. In the viewport it is rotating automatically with the view, however the boxes around the text do not rotate as well. Is there anyway to automate this?
The Client requires a key plan which has all the pipe data on it. The key plan is oriented in one direction. Then for the plan & profile drawings, the plan is oriented in another direction. I don't want to have two create two sets of text (one for the key plan and one for the plan/profile drawing). How can I use one set of text and make it work in the key plan and for all the plan/profile drawings? Image is attached.
