I know that we can have precision movement within viewport using -pan. However that panning is limited to the active viewport, 1 at a time by double clicking in the viewport. Is there a way to apply -pan to a number of viewports, say I want to move all the model space irrespective of scale 300 mm to the west or 100 mm to the north in more than 1 viewport.
View 9 RepliesIs there a way to pan/move an existing Paperspace Viewport to a defined coordinate? For example you can rotate a Paperspace Viewport with the UCS and Plan view commands
To rotate a view by changing the UCS
Double-click within the viewport whose objects you want to rotate. Make sure that the current UCS is parallel to the plane of rotation (the UCS icon should look normal). If the UCS is not parallel to the plane of rotation, click Tools menu New UCS View.If the UCS is not parallel to the plane of rotation, at the Command prompt, enter ucs. Click Tools menu New UCS Z.At the Command prompt, enter ucs. To rotate the view 90 degrees clockwise, enter 90. To rotate the view 90 degrees counter-clockwise, enter -90. Click View menu 3D Views Plan View Current UCS.At the Command prompt, enter plan. The entire view rotates within the viewport. You may need to specify the scale of the viewport again.
I am copying layout views with a tilteblock and viewport. Going to the new view and having to pan orthagonally down 50 units. I tried setting up named ucs for the 2 locations but that didn't move the viewport as I would thought.
I have an issue when working in paper space in an active viewport. As a quick change i want to move a few items and im zoomed in to do so. Problem is, when i select some items, then pan with the 3rd button on the mouse to select more items, it deselcts all the items i previously just selected.
Is there a fix or something i need to change in options for this? In AutoCAD 2011 there is no problem, but my upgrade to 2013 has the issue and its such a pain, i've reverted to the old program.
I have a lot of sheet DWGs with a single layout in each. The layouts have several viewports into model space.
Is there a way to export out the layout tab where the viewport contents have been converted and placed into the layout space?
Ideally, I'm hoping to basically convert the viewport heavy paperspace into a dumb model space layout.
I have one layout. On that layout I want to have 2 viewports. I also have ssay block A and block B I want to insert.I would like Viewport1 to display block A and viewport 2 to display block B.
What happens to me is when I created Viewport 1 and inserted block A. I go on to create viewport 2. But viewport 2 displays only block A, which I cannon delete to insert block B.
I thought I would just check with the experts before I go down a road that may be a dead end.
What I am trying to do can best be described if you happen to have watched some of the Harry Potter movies, where they walk down a staircase that has all the historical paintings on the wall. Unlike standard paintings, these ones take on a life of their own and have movement inside the frame.
I would love to do something similar, albeit in a simpler fashion, by having a large static image on the main track, containing several picture frames, and then pan and zoom around this static image looking at all the moving images (videos) in the picture frames.
One thought I had was to create a very large images (4000 X 3000) containing all the picture frames. Then, in the overlay tracks I would place all the videos that would represent the moving paintings. The videos would be lined up with the picture frames using the picture-in-picture effect, and then I would pan-and-zoom around the static image viewing all the videos as they played simultaneously in the overlay tracks.
I fear there are several problems with this strategy, the central issue being that when I pan-and-zoom the main track, the overlay tracks wont pan-and-zoom with it.... Perhaps I could move the videos around the screen in sync with the pan-and-zoom, but that seems pretty difficult.
Is what I am trying to do even practical in VS Pro X4?
I wrote a program to separate drawings with multiple layouts into several drawings. The problem I'm running into is even though there is only one viewport in the layout.the program is finding two. One has the right viewcenter, width and height the other is wrong.
View 1 Replies View RelatedI am using ACAD LT 2012. I currently have 3 ucs viewports in my drawing. Each time I switch from one viewport to another using my left mouse button, the drawing regenerates. How do I stop this from happening?
View 6 Replies View RelatedI am working on AutoCAD 2013LT and I tried to use multiple viewports in model space which is a new thing to AutoCAD (i think). Anyway I wasn't using it on the last version.
Under View Tab when I go to choose different Viewport configurations sometimes some of the views change to isometric view. I don't know how to change it back to 2d view.
They mension something about viewport control lables which should be in top left corner, but I don't see those in my viweports.
Is there a way to copy a viewport with all its layers setup from one drawing file to another drawing file?
I can copy the viewport and activate it, but the layers setup for that viewport goes to default. So it turns everything on.
I can't make a layer state in the old file and import in new file, because the new file does not have all the same layers. So not all my layers would be turned off in the viewport.
I am creating plan sheets and using the sheet creation tool. The plan sheets I am looking to make have stacked view, similar to a plan and profile sheet, only they have the horizontal alignment in both views.
I have a template set up with two viewports, but when I try to create the sheets it puts the same view frame in both of the viewports. Is there any way to set this template up so that I can have, lets say, STA 100+00 - 110+00 in the top viewport and then STA 110+00 - 120+00 in the bottom viewport. I understand that I can move the viewports once they are created, but I would rather have that done automatically. I am not sure if what I want done is possible with Civil 3D.
I am trying to learn Annotative text using multiple viewports. My question: I have text in Model space with Annotative scales to match two different viewports in layout space. Sometimes the text or dimensions for that matter appears in a different place in the two windows. What gives?
View 7 Replies View RelatedEvery once and a while when I open up a dwg, autocad will load with what looks like two viewports in my model space tab. The bottom viewport is not clickable and the top viewport is very thin and is the one I am able to move around in. I would like to get this to stop.
View 6 Replies View RelatedI am currently working on a .DWG in Civil3D which has 12 viewports. This particular .DWG causes my computer to lag quite a bit. I was wondering if there was a way of combining viewports in paper space (i.e. taking areas from multiple viewports and displaying them in one viewport), or if I am stuck with the individual viewports? I am just looking to speed up the process, it takes a long time to load the .DWG and work within it, the problem happens to others as well.
.DWG info:
Large area with many smaller sites (retention ponds and such)
All sites must remain in the paper space layout
(I've tried deleting viewports, and that does speed up the process, but again, I need to keep all sites intact).
Computer info:
Windows 7 64-bit
8GB Ram
Intel Core i5-3450 CPU @ 3.10GHz
NVIDIA Quadro FX 1800
I have two viewports, one that is not rotated at 1:50 scale, the other rotated at 1:20 scale, and using associative dimensioning, therefore viewing the same model object with two associative scales. The rotated viewport is showing the dimenions upsidedown since it is rotated more than 180deg. If I modify the dimension properties to Left to Right instead of Right to Left, it rotates my other unmodified viewport. The only way right now to have the dimensions showing properly, is to print the first pages with the unmodified viewports, then modify the dimension properties, and then print the rotated viewport pages.
View 0 Replies View RelatedIf I have UPSFOLLOW set to '1' when using multiple viewports in the workspace when I click from one viewport to another it refreshes the viewport that I'm leaving with the setting of the viewport I select. If I set UPSFOLLOW to '0' it doesn't happen. Is there a way of stopping this happening without having to keep changing the UPSFOLLOW setting i.e. have UPSFOLLOW set to '1' and the viewports not change when swapping them?
View 2 Replies View RelatedI have a few files with layouts that have multiple viewports where layers were frozen to get the desired display, the drawing was saved, yet everytime the drawing is re-opened those layers are on again. This is creating problems because I am batch plotting many drawings at once. The layers are not locked.
View 4 Replies View RelatedAny routine to re-size viewports in multiple layouts? We have to re-size viewports as they were created a little too small and are now spread across almost 1000 drawings in 18 dwg.
View 6 Replies View RelatedI've completed my drawing (Autocad architectural 2012) and set-up my multiple view-ports (at 1:50 and 1:5 scale) on my title-block.
I'm now going to add my text and dimensions im model space....and that's when the problems start!
I've created text and dimensions in annotative style.
The issue I have is when I change annotation scale from 1:50 to 1:5 my text and dimensions in model space automatically changes (as can be seen on attachment) to a huge scale but is perfect in layout view for differing scales.
I'm creating a drawing set that has over 100 sheets with varying amounts of viewports on each sheet (from one to four). Each sheet is its own file, so there is only one layout per file. For each section of the drawing set, the viewports will have the same layer state.
Is there were a way to update the layerstate of each viewport through a batch LISP routine? This would save me DAYS in opening each file, importing the layer state, and restoring it for each viewport. It seems straight forward, but I have no idea where to start with batch routines.
I have just installed 2012 and have drawn a 3d model. In paperspace i have a couple of viewports , all nicely set out at 1:5 scale. then i click in another viewport and bam, all the other viewports change scale (zoom out) and orientation. is there some system variable that i have overlooked?
View 9 Replies View RelatedI have used annotative text and selected yes for match orientation to layout for the text. In the viewport it is rotating automatically with the view, however the boxes around the text do not rotate as well. Is there anyway to automate this?
The Client requires a key plan which has all the pipe data on it. The key plan is oriented in one direction. Then for the plan & profile drawings, the plan is oriented in another direction. I don't want to have two create two sets of text (one for the key plan and one for the plan/profile drawing). How can I use one set of text and make it work in the key plan and for all the plan/profile drawings? Image is attached.
The code I'm using is supposed to go through all of the layouts and freeze the specified layer in the single viewport that is defined on that layout. It works for some viewports, but not for others. A "List" of the objects show the viewports are the same. I have a LiSP routine that gets me more info about selected objects. The first is a viewport that does not freeze the specified layer, the second does freeze the layer. Here is the code I'm using:
Public Sub FreezeNewLayerInVPs(ByVal pageNumber) Dim doc As Document = Application.DocumentManager.MdiActiveDocumentDim db As Database = doc.Database Dim layerToFreeze As String = "DETAIL_" & pageNumber Using tr As Transaction = db.TransactionManager. Start Transaction( )Dim layTable As LayerTable = DirectCast(tr.GetObject(db.LayerTableId, OpenMode.ForRead),
[code]...
How to get precise elevations at lowest and highest points. I need to get spots where the water flows and its precise elevation at that spot as analysis.
View 4 Replies View RelatedOne of my students has moved their precise input toolbar. How do I bring it back?
View 5 Replies View RelatedIn V2013 i make a 3D sketch and choose spline. I don't see the precise input toolbar and don't know how to bring it.
View 6 Replies View RelatedI am using Autodesk Inventor 2013 and for some reason I cannot access the precise input option. I can find the icon in the draw box, but it is grayed out and not clickable.
View 9 Replies View RelatedHow to set time on precise value in SUN & LOCATION panel in RENDER tab. There is only a very anprecise slider (aboute 8 min skip) or in Sun Properties window I can select time only every 15 min. I need to set time every minute to analyse the shadow on the building.
View 2 Replies View RelatedTo simplify lets say I have a square plate, vertically positioned. I have a square tube that I wish to cantilever off the plate and weld into place horizontally. EVERY time I bring that square tube in (lets say its a subassembly of its own rather than a part), it is precisely 1 inch below the top of the plate and 1 in in from the left edge.
make that happen where maybe I bring the part in and click on the two faces, it knows the other two contraints?
Is it possible to pan within the viewport. I find that I am constantly trying to chase the right part of the drawing for the viewport using the viewport resize handles. Worst is if I scale in and loose the part of the drawing I wanted to show and have to use the handles again to make the viewport really large to find the spot that way.
I have worked out the scaling but the panning within the viewport would be really useful.
i have just set up remote access from my home laptop to my work computer. for some reason i am having problems with panning using the wheel button on my mouse. instead of panning it acts as a right click function and brings up the menu. Could this just be down to the mouse itself?
View 3 Replies View Related