Is it possible to pan within the viewport. I find that I am constantly trying to chase the right part of the drawing for the viewport using the viewport resize handles. Worst is if I scale in and loose the part of the drawing I wanted to show and have to use the handles again to make the viewport really large to find the spot that way.
I have worked out the scaling but the panning within the viewport would be really useful.
Is there a way to pan/move an existing Paperspace Viewport to a defined coordinate? For example you can rotate a Paperspace Viewport with the UCS and Plan view commands
To rotate a view by changing the UCS
Double-click within the viewport whose objects you want to rotate. Make sure that the current UCS is parallel to the plane of rotation (the UCS icon should look normal). If the UCS is not parallel to the plane of rotation, click Tools menu New UCS View.If the UCS is not parallel to the plane of rotation, at the Command prompt, enter ucs. Click Tools menu New UCS Z.At the Command prompt, enter ucs. To rotate the view 90 degrees clockwise, enter 90. To rotate the view 90 degrees counter-clockwise, enter -90. Click View menu 3D Views Plan View Current UCS.At the Command prompt, enter plan. The entire view rotates within the viewport. You may need to specify the scale of the viewport again.
I am copying layout views with a tilteblock and viewport. Going to the new view and having to pan orthagonally down 50 units. I tried setting up named ucs for the 2 locations but that didn't move the viewport as I would thought.
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies View Relatedi have just set up remote access from my home laptop to my work computer. for some reason i am having problems with panning using the wheel button on my mouse. instead of panning it acts as a right click function and brings up the menu. Could this just be down to the mouse itself?
View 3 Replies View RelatedI am using AutoCad 2012 and have just gotten a new screen and Logitech mouse. I can't get the scroll wheel to pan for me. When I press the scroll wheel I see a zoom button on the screen instead of a pan symbol.
View 1 Replies View RelatedI am tasked with tidying up some drawings that have been exported from Vectorworks and it seems there is a fundamental problem with the drawing.
Some lines do not appear when viewing the drawing, they only appear when panning or when I select all. There are some cases where a line disappears behind a rectangle as if it had a hatch fill yet no such thing exists.
I have attached the drawing in question.
I am using AutoCAD 2012 for Mac.
How do I change a polygonal viewport to a rectangular viewport?
View 5 Replies View RelatedProblem: When I create a new viewport, another viewport's paperspace blanks out or disappears. When I copy a viewport over, the new VP doesn't show anything and you can't maximize/"enter" its paperspace; it's like a simple rectangle, but the properties box says it is indeed a viewport.
Ex. Viewport 1 shows the top view of an object, Viewport 2 shows the right side view... as soon as I add Viewport 3, the top view in VP 1 blacks out. I attempt to ReDraw, Regenerate, etc, but it doesn't re-appear. I've run Plot Preview to see if maybe it's just a fluke with the graphics card on my screen, but alas, even in plot preview the viewport is blanked out.
It almost seems like there is a limited number of viewports I can use.
Solution: Run the MaxActVP command and set the value to a number greater than the number of VPs you actually need. This particular file had that value set at 2; hence, why a new, third VP blanked out the first one.
When I pan around a drawing by holding down the scroll wheel of the mouse button, I sometimes pan quite slowly, AutoCAD decides to zoom to extents. I know I have not double clicked the scroll wheel.
View 3 Replies View RelatedI've recently installed a microsoft wireless mouse. I'm having issues because the middle wheel doesn't pan when pressed down. I've searched the discussion forums at the Autodesk (both Lt & full ACAD) site, and can see this has been discussed previously, but the accepted remedy of control panel/mouse settings and ensuring that the mouse wheel is set to "middle click" is listed (and selected), but doesn't have any effect. I have MBUTTONPAN set to 1. I'm not sure what else needs to be done to get the middle button to pan.
View 9 Replies View RelatedI have an issue when working in paper space in an active viewport. As a quick change i want to move a few items and im zoomed in to do so. Problem is, when i select some items, then pan with the 3rd button on the mouse to select more items, it deselcts all the items i previously just selected.
Is there a fix or something i need to change in options for this? In AutoCAD 2011 there is no problem, but my upgrade to 2013 has the issue and its such a pain, i've reverted to the old program.
I know that we can have precision movement within viewport using -pan. However that panning is limited to the active viewport, 1 at a time by double clicking in the viewport. Is there a way to apply -pan to a number of viewports, say I want to move all the model space irrespective of scale 300 mm to the west or 100 mm to the north in more than 1 viewport.
View 9 Replies View RelatedI had my ACAD window up and another window up at the same time. I thought I was in the other window and pushed some sort of CTRL+(something) command but it enabled in ACAD since it was my active window. Well, I don't know what I pressed but now when I have something selected (with no command running) and try to pan to select additional items, the panning results in deselecting everything I had previously selected.
As you imagine this is quite annoying... I tried searching for something but the only thing I found was the command "pickadd". I tried the different settings for this and none worked. I can not remember what CTRL+ command I pressed... When the window popped up in ACAD, I just closed out of it real quick without (or at least I thought without) clicking anything.
When i use panning in 2D mode the drawing disappears from my viewport. Autocad and all tools are still visible but there is nothing in drawing screen. When i zoom extent(z+e) it comes back again but in a couple minutes it disappears again while i am panning.
View 9 Replies View RelatedMy laptop died recently and I had to get a new one then reinstall my AutoCAD 2010 software. Trouble is the mouse wheel no longer zooms or, when held down, pans any more. I have spent the last couple of hours trying to sort this but to no avail - nothing happens when I use the mousewheel at all. SO frustrating as I use this all the time!
I run Windows 7 Pro OS and the mouse is a fairly basic HP model with two buttons and a wheel. (maybe I need to upgrade the thing...!)
Since installing SP1, I have noticed "ghosting" when panning/zooming in paperspace i.e. the original image is still visible. The only solution I have found is to turn off Hardware Acceleration and then turn it back on.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I have just noticed that while in Isometric view I can Pan an item in the window by pressing the arrow keys on a keyboard. One thing however is that to pan to the right side of the screen I have to press left arrow key. It is sort of pressing the "wrong" key to get the model slide to the "right" direction.
View 6 Replies View RelatedI am trying to select some portion of my drawing for layer change, but when I panning the view for additional selection, I lost the grips of first selected entities.
View 2 Replies View RelatedI have a drawing with a viewport that fits to the page. And I created another smaller viewport over top that just shows the legend. Now when I try to double click inside the smaller viewport it always goes into the larger one. I have tried bringing the smaller one to the front but that didn't work. I know that I can clip the larger viewport around the smaller one or bring the legend right into paperspace or slid the smaller one off to the side work in it and slide it back. This is more out of curiosity of how to get into the smaller viewport.
View 2 Replies View RelatedI am wanting to insert a second viewport over an existing viewport and have the information in the existing viewport behind the second viewport and not seen. I want the second viewport boundary to be the "trimming" edge of the existing viewport. How do I do this?
View 3 Replies View RelatedI did a test drawing with 4 viewports in paperspace.I frozen a layer in each viewport (as a viewport override, not global), and wrote code to gather info on layer overrides in viewports.The function takes in a database, and is generally used on drawings only open in memory:
public static bool GetLayerInfoFromDB2(Database db) { //do viewports on layoutstry {using (Transaction tr = db. Transaction Manager. Start Transaction()) { ObjectId ldid = db.LayoutDictionaryId;DBDictionary ld = (DBDictionary)tr.GetObject(ldid,
[code]....
the odd thing is it never finds the frozen viewports on the first viewport. It catches the others fine.I cannot see anything odd either, the counts of viewports and layers are all correct, and the drawing has no problems.Is there something that must be done to initialize the mechanism that reads viewport overrides?
how do you create a viewport within an existing viewport ?
View 9 Replies View RelatedSo recently I started making something in Inventor, and like most programs you can press the middle mouse button and it will pan or orbit. Well I'm pretty sure that in the past if I pressed the middle mpuse button it would pan or orbit. But now it is zooming all for the model, and only when it is zoomed to the whole model does it let me pan or rotate. If I were to zoom in on a line for example and wanted to pan to the right, it zooms me out to the whole model, and then I can pan. I have tried multiple mouse buttona all combinations of shift ctrl and alt and middle mosue, but nothing is working. How can I make it so it does not zoom all when clicking the middle mouse?
View 1 Replies View RelatedI guess because the view is actually saved, but is there a way to disable view saving or any other way that an UNCHANGED drawing does not ask me to save?
This is related to the option to combine zoom and pan actions in undo, but what I really want is to remove them from undo completely. That way if you zoom out you could see what changes, and you wouldn't LOSE THE ABILITY TO REDO by zooming.
Optimally, AUTOCAD could ask for each drawing whether it should save, and then save the ones that you selected, together. This way you could just leave the application to save and tab to something else
I'd be really happy to see this option in future releases. Because when you undo you can't always see the change, and being able to zoom/pan independently of the action history would mean that you can look at the drawing without losing the latest drawing.
I captured in HD, edited in Video Studio X3 then output to MPEG using same settings as video files. I then gave up trying to burn using Movie Factory Pro 7se as it kept crashing during render so I used DVD Flick. the resulting DVD seems fine apart from when the camera pans and the video appears to be a little blurry. Any stills or slow panning are perfect.
Dropping the bit rate from 9000kbps to 8000kbps but that just made the video look awful.
I was just wondering why flick-panning stopped working....until I found out that if the option to move all open images (in the options bar of the hand-tool....don`t know the exact wording, because I have a german version) is on, flick-pannig does not work.
View 3 Replies View Related I upgraded to the latest and greatest version 2.8. I like most everything about 2.8.x. Generally, I have found the adjustments/transition to the new feature and controls to be a rather easy. However, I am having an issue with panning, while editing. It doesn't matter if I am at 100%, or while zoomed in, or zoomed-out, panning is a problem.
All the way up-to and through versions 2.6.x, while working details, zoomed-in to 800% or so, when I would PAN the image (hold down the Space-bar, hold down the left-mouse, drag the mouse, or while using the vertical and horizontal scroll bars) it was always a smooth image drag/movement. Since the introduction of 2.8.x Panning has become a nightmare. It's extremely choppy with, broken up, and it freezes up for short periods of time, basically it's anything but smooth. The panning feature is a huge step backwards from what I have become accustom to. The problem is I am zoomed-in on whatever it is I am working on at least 95% of the time (cutting, painting, etc.).
Perhaps I am just a creature of habit but I like working at the pixel level. I'd like to get panning working the way it has always worked.
When I have multitple photos open in PS, and I try to pan just the one which is active (leaving the others alone) for some reason I end up panning all the open photos. How can I stop this and just pan the one photo that's active?
View 3 Replies View RelatedI have PSP Pro X6 64bits french with the lastest service pack installed. I tried this:
Zoom in a picture that's bigger than the screenInsert a vector object (ellipse for example)Switch to the "move" tool and try to move the shape to the top of the picture. I went too far towards the top and I went beyond it. As I lost it, and after having zoomed out, I went back one step in the "Undo" list to retrieve itThat's where weird reaction are beginning: the refresh system is somewhat lost: I have to zoom out/in with the mouse to force a refresh. Sometimes, I move the object and it seems to jump back
Lag occurs primarily on selections and brush strokes after using the pan tool, but these lags were only present when Vista's Aero theme was DISABLED and vista was running the basic theme (something you would otherwise think improved performance) this is however not the case for Photoshop.
Our dilemma is though that we cannot run 3dsmax in Aero mode and as such this fix is essentially useless :(.
Other sources on the web have indicated these problems as being nvidia driver related (my problems occured running a 8800gtx), this is so far unconfirmed by me although i will be testing a highend ati card shortly.
Wow, Max 2012 is buggy as hell! I keep finding bug after bug after bug.
I have both Service packs and hotfixes applied. When I enter Wireframe mode while panning I cannot go back to Shaded mode. Try it yourself - make sure you are in Shaded mode, click and hold the middle mouse button and pan around without releasing it. Then press F3 while still panning to go into Wireframe mode and then release the middle mouse button. Now if you try to go back into shaded you can't! Unless you manually go and change it through the viewport options in the top left corner of the viewport.