I was just wondering why flick-panning stopped working....until I found out that if the option to move all open images (in the options bar of the hand-tool....don`t know the exact wording, because I have a german version) is on, flick-pannig does not work.
View 3 RepliesThe other day(most likely either coinciding with an update or maybe downloading another CC program) scrubby zoom and flick panning both stopped working. If I select the zoom tool scrubby zoom is greyed out.
Adobe Photoshop CS6 version 13.1.2 x32 EXTENDED
when I am working on a large drawing and/or pasting as a block, all the grey lines (colour 8) turn to white. When I select a grey line, it flicks back to grey, but de-select, and it's white again.
If I toggle on hardware acceleration, the problem is fixed for a short while, and also if I turn it off, it is fixed for a short while, and also if I save, close and re-open it's good untill I paste a block....
I suspect it may be because of my setup and an un tested graphics card:
Windows 7 64 bit Ultimate - running through bootcamp on a macbook pro
Autocad 2012 Lt
Machine Configuration
---------------------
Processor Speed : 2.2 GHz
RAM : 8103 MB
3D Device
---------
Name : AMD Radeon HD 6750M
Manufacturer : AMD
Chip set : Radeon HD 6750M
Memory : 707 MB
Driver : 8.17.0010.1063
Your machine contains a 3D Device that is not certified.
When I have multitple photos open in PS, and I try to pan just the one which is active (leaving the others alone) for some reason I end up panning all the open photos. How can I stop this and just pan the one photo that's active?
View 3 Replies View RelatedLag occurs primarily on selections and brush strokes after using the pan tool, but these lags were only present when Vista's Aero theme was DISABLED and vista was running the basic theme (something you would otherwise think improved performance) this is however not the case for Photoshop.
Our dilemma is though that we cannot run 3dsmax in Aero mode and as such this fix is essentially useless :(.
Other sources on the web have indicated these problems as being nvidia driver related (my problems occured running a 8800gtx), this is so far unconfirmed by me although i will be testing a highend ati card shortly.
When using the image size dialog, regardless of the zoom amount or the size of the dialog I have no ability to pan around the image in the preview window.I have the hand available to me and clicking on the preview shows before and after variations but no panning. The main image behind the dialog does pan whenever I try panning in the preview window.
View 1 Replies View RelatedI don't mean the Zoom Tool, but simple zoom in/out operations. I seem to recall that the default behaviour in Photoshop was that you zoomed with Ctrl+mousewheel scrolling, and if you just scrolled, then the picture would pan up/down (vertically). And you could untick the "Zoom with scroll wheel" option if you didn't want Ctrl+scroll to mean "zoom".
However for a while now, having that option ticked seems to mean that scrolling (with no Ctrl) is all it takes to zoom in/out, and if you untick the option then you need to press Alt+scroll to zoom; in either case, there is no shortcut for panningup/down.
Anyway, whether this was really ever the case or not, my question is: is it somehow possible to make it so Ctrl+scroll zooms and (simple) scroll pans vertically?
How about add this feature to Photoshop?
Hold down mouse middle button = hold down spacebar panning?
I would like to try Photoshop for digital art. I downloaded the 30 day trial version of Adobe Illustrator CS 6 about three days ago and noticed immediately that touching my laptop’s touch screen will only allow me to pan using the Hand Tool in Photoshop. I have never had this problem in Adobe Illustrator, as using the touch screen acts just as if I were clicking the left mouse button and dragging the cursor around the screen. I have a Dell XPS 15 - L502X laptop with an integrated touch screen (the entire 15” screen is Multi-touch sensitive). It is running N-Trig DuoSense Digitizer with the latest drivers. Is there some simple setting change that can be done within Photoshop CS6 to make it recognize a touch screen input as a normal left click and thus allow me to draw on it using the pen, pencil, or paintbrush tool? I find it quite odd that I have no problems with this in Illustrator CS6. Could it be that this tablet-like touch screen input is restricted on the trial version?
Here is a link to a youtube video that I put up showing the problem. The first program shown in the video is Adobe Illustrator CS6 using the Paintbrush tool. The second program shown is Adobe Photosop CS6 using the pencil tool. I draw the line in Ps using the mouse pad and then attempt to draw (still using the pencil tool) on the touch screen yielding only scrolling with the hand tool.
[URL]
Here's my system specs copy pasted right from PhotoShop.
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
[code]...
I captured in HD, edited in Video Studio X3 then output to MPEG using same settings as video files. I then gave up trying to burn using Movie Factory Pro 7se as it kept crashing during render so I used DVD Flick. the resulting DVD seems fine apart from when the camera pans and the video appears to be a little blurry. Any stills or slow panning are perfect.
Dropping the bit rate from 9000kbps to 8000kbps but that just made the video look awful.
Is it possible to pan within the viewport. I find that I am constantly trying to chase the right part of the drawing for the viewport using the viewport resize handles. Worst is if I scale in and loose the part of the drawing I wanted to show and have to use the handles again to make the viewport really large to find the spot that way.
I have worked out the scaling but the panning within the viewport would be really useful.
Is there a way to pan/move an existing Paperspace Viewport to a defined coordinate? For example you can rotate a Paperspace Viewport with the UCS and Plan view commands
To rotate a view by changing the UCS
Double-click within the viewport whose objects you want to rotate. Make sure that the current UCS is parallel to the plane of rotation (the UCS icon should look normal). If the UCS is not parallel to the plane of rotation, click Tools menu New UCS View.If the UCS is not parallel to the plane of rotation, at the Command prompt, enter ucs. Click Tools menu New UCS Z.At the Command prompt, enter ucs. To rotate the view 90 degrees clockwise, enter 90. To rotate the view 90 degrees counter-clockwise, enter -90. Click View menu 3D Views Plan View Current UCS.At the Command prompt, enter plan. The entire view rotates within the viewport. You may need to specify the scale of the viewport again.
I am copying layout views with a tilteblock and viewport. Going to the new view and having to pan orthagonally down 50 units. I tried setting up named ucs for the 2 locations but that didn't move the viewport as I would thought.
I upgraded to the latest and greatest version 2.8. I like most everything about 2.8.x. Generally, I have found the adjustments/transition to the new feature and controls to be a rather easy. However, I am having an issue with panning, while editing. It doesn't matter if I am at 100%, or while zoomed in, or zoomed-out, panning is a problem.
All the way up-to and through versions 2.6.x, while working details, zoomed-in to 800% or so, when I would PAN the image (hold down the Space-bar, hold down the left-mouse, drag the mouse, or while using the vertical and horizontal scroll bars) it was always a smooth image drag/movement. Since the introduction of 2.8.x Panning has become a nightmare. It's extremely choppy with, broken up, and it freezes up for short periods of time, basically it's anything but smooth. The panning feature is a huge step backwards from what I have become accustom to. The problem is I am zoomed-in on whatever it is I am working on at least 95% of the time (cutting, painting, etc.).
Perhaps I am just a creature of habit but I like working at the pixel level. I'd like to get panning working the way it has always worked.
I have PSP Pro X6 64bits french with the lastest service pack installed. I tried this:
Zoom in a picture that's bigger than the screenInsert a vector object (ellipse for example)Switch to the "move" tool and try to move the shape to the top of the picture. I went too far towards the top and I went beyond it. As I lost it, and after having zoomed out, I went back one step in the "Undo" list to retrieve itThat's where weird reaction are beginning: the refresh system is somewhat lost: I have to zoom out/in with the mouse to force a refresh. Sometimes, I move the object and it seems to jump back
i have just set up remote access from my home laptop to my work computer. for some reason i am having problems with panning using the wheel button on my mouse. instead of panning it acts as a right click function and brings up the menu. Could this just be down to the mouse itself?
View 3 Replies View RelatedWow, Max 2012 is buggy as hell! I keep finding bug after bug after bug.
I have both Service packs and hotfixes applied. When I enter Wireframe mode while panning I cannot go back to Shaded mode. Try it yourself - make sure you are in Shaded mode, click and hold the middle mouse button and pan around without releasing it. Then press F3 while still panning to go into Wireframe mode and then release the middle mouse button. Now if you try to go back into shaded you can't! Unless you manually go and change it through the viewport options in the top left corner of the viewport.
I am using AutoCad 2012 and have just gotten a new screen and Logitech mouse. I can't get the scroll wheel to pan for me. When I press the scroll wheel I see a zoom button on the screen instead of a pan symbol.
View 1 Replies View RelatedI am tasked with tidying up some drawings that have been exported from Vectorworks and it seems there is a fundamental problem with the drawing.
Some lines do not appear when viewing the drawing, they only appear when panning or when I select all. There are some cases where a line disappears behind a rectangle as if it had a hatch fill yet no such thing exists.
I have attached the drawing in question.
I am using AutoCAD 2012 for Mac.
Something is wrong with the audio panning feature in Premiere pro CC.I've been panning my audio clips to the left and right for about a year now. never had a problem before today.On the sequence time line: Select the audio clip in A1 in the "Audio Effects" window: pan the clip 100% left DITO clip in A2 but pan it 100% right Play the sequence: the "audio track mixer" shows Audio 1: left channel only. Audio 2 right channel only
Today: after going thru the panning ritual: both channels play in Audio 1 and Audio 2 (not in a panned formation)
-So I repeated in a fresh CC Same result... closed/opend the project ... rebooted the computer ...same result moved the clips onto different tracks: got different results in the audio track mixer sometimes they showed panned sometimes not.
-So I tried muting a track: then the othre track showed panned. Just plain weird.
-So I repeated the procedure in CS6: no problem. everything was correct.
-So I repeated it yet again in CC: all messed up.
I'm using VS x5.
Basically, I have a Sanyo HD camera which I've used to capture quite a bit of holiday footage. I've edited some together but when I output the project to either mp4 or mts the picture is choppy when panning.
The camera was set to 1080p @ 30fps (there's no option of 25fps even though the camera was bought here in the UK) which I have matched by choosing the "Custom" option when creating the movie. I've matched the bitrate (16789bps on the source) but this ends up being 15540bps on the output file. (??) According to the properties on the source file it's 29.97fps which I have also matched in the Custom settings option.
I understand I should expect dropped frames if I was trying to output the file as PAL compliant, but I've got VS set to NTSC so I don't think this is an issue.
The source file is mp4 and looks fine when viewing the panning scenes.
PC Spec:
Intel quad core 2.4Ghz
4Gb RAM
ATI Radeon 5430 Graphics card
2TB SATA HDD
Windows Ultimate x64
When I pan around a drawing by holding down the scroll wheel of the mouse button, I sometimes pan quite slowly, AutoCAD decides to zoom to extents. I know I have not double clicked the scroll wheel.
View 3 Replies View RelatedI've recently installed a microsoft wireless mouse. I'm having issues because the middle wheel doesn't pan when pressed down. I've searched the discussion forums at the Autodesk (both Lt & full ACAD) site, and can see this has been discussed previously, but the accepted remedy of control panel/mouse settings and ensuring that the mouse wheel is set to "middle click" is listed (and selected), but doesn't have any effect. I have MBUTTONPAN set to 1. I'm not sure what else needs to be done to get the middle button to pan.
View 9 Replies View RelatedI'm using a student version of RAC 2011 and everything works out well upon installation. My problem is that whenever I pan or zoom in on my model, the screen will blink black and white, and at certain zoom level, the screen stays all black. I'm using an ASUS K52jc-Ex303 laptop with the following specs:
Operating System: Windows 7 Ultimate 32-bit
Processor: Intel Intel® Core™i3-370 2.40 GHz
Memory: 4GB DDR3
Graphics Card: NVIDIA Geforce 310M
I have already installed the latest drivers from nvidia, which doesn't seem to work.
Matter of fact, it's so bad, that i'm always forced to turn off hardware acceleration which is a headache especially with large-scale models and it keeps on crashing.
I understand the fact that this GPU was built for gaming, and its not listed in the list of recommended graphics cards by autodesk. (I get the some features... message everytime i open RAC) My question is, is there anyway I can tweak the settings within the nvidia control panel to improve this issue on my revit architecture 2011?
I have an issue when working in paper space in an active viewport. As a quick change i want to move a few items and im zoomed in to do so. Problem is, when i select some items, then pan with the 3rd button on the mouse to select more items, it deselcts all the items i previously just selected.
Is there a fix or something i need to change in options for this? In AutoCAD 2011 there is no problem, but my upgrade to 2013 has the issue and its such a pain, i've reverted to the old program.
I know that we can have precision movement within viewport using -pan. However that panning is limited to the active viewport, 1 at a time by double clicking in the viewport. Is there a way to apply -pan to a number of viewports, say I want to move all the model space irrespective of scale 300 mm to the west or 100 mm to the north in more than 1 viewport.
View 9 Replies View Relatedi managed to test G2.8.4 without uninstalling my current 2.6.And therefore, i have some questions, and the first one is about the strange behaviour of the image drawing when panning the picture.Instead of long boring words, lemme post a picture of the picture window after panning the image: The image is brought as attachement...
After a short time ( from less than 1 sec to 2-3 sec) this appearance disappears and the image is properly drawn.
for info: win7 on AMD dual core with 4Gb RAM and a Geforce GT 210 with 512Mb VRAM. drivers are up to date
I had my ACAD window up and another window up at the same time. I thought I was in the other window and pushed some sort of CTRL+(something) command but it enabled in ACAD since it was my active window. Well, I don't know what I pressed but now when I have something selected (with no command running) and try to pan to select additional items, the panning results in deselecting everything I had previously selected.
As you imagine this is quite annoying... I tried searching for something but the only thing I found was the command "pickadd". I tried the different settings for this and none worked. I can not remember what CTRL+ command I pressed... When the window popped up in ACAD, I just closed out of it real quick without (or at least I thought without) clicking anything.
I would like to continue using the Adjustment Brush outside of a currently zoomed area without having to jump out to pan with the mouse to the next area of the image. (If I change from the Adjustment Brush to mouse-click driven panning, I simply lose the end of my formerly brushed (painted) area, because it can be 're-activated' only with its pin, which is outside of the new area where I have just moved by panning with the mouse.)
I can move up and down with the scrolling roll without quitting the Adjustment Brush, but I have not figured out how to pan horizontally with a shortcut (e.g. something like Shift + Left/Right arrow key).
I am aware that by using the Shift + PgUp/PgDn keys I can pan up to the top, then down to the bottom in the adjacent strip, and then up again in the third strip, etc. But this 'vertical zig-zagging' is very time consuming and does not necessarily take me right to the targeted next area.
Is there any shortcut for horizontal panning in Zoom?
Just installed Lightroom 5.In the Library module while panning a zoomed in image the movement is very jerky. This only happens on the second and subsequent images opened. The first image after launching Lightroom is fine.
View 1 Replies View RelatedA friend gave me an SD card of her wedding to tidy up and put onto a DVD. The format is MPG-4. The clips play fine but as soon as I put it all onto onto the time-line I get the odd jump on panning of the camera, which are not there on the clips. I know this can relate to the project settings and I have played around with these, adjusting the bit rate up and down.
View 2 Replies View RelatedI've just bought a fluid head tripod and have been practising with it and getting some fairly smooth results. I've been shooting at a resolution of 1920x1080 at 30fps in MPEG4 AVC/H.264. When I watch the video in the LCD display on the video camera or plug my video camera (Sanyo Xacti FH1) into my 40 inch TV the results look smooth. But as soon as I download them onto my computer and watch them in VideoLan or QuickTime, the results are awful. The picture jerks several times a second throughout the panning shots. I have imported some of the clips into VideoStudio Pro X4, and made smart proxies of them and some but not all of them run smoothly but when I create an MP4 HD file in VS4 the results are just once again awfully jerky. My computer is only a couple of months old: AMD Athlon II X4651 Quad Core and Radion HD6700 series graphics card with 4Gb of ROM running Windows 7 Home Premium 64bit. What I can't understand is why the panning looks so smooth on the camera and on my TV (so it isn't due to the small size of the camera's LCD) but as soon as I download it to the computer it looks so awful. I'm aiming to put up some film clips of archaeological sites in Crete on YouTube and I am due to go round the island shooting video but I can't possibly put results like these on the Internet. What could be causing the difference between what my camera shows and what my computer shows?
View 14 Replies View Related