i have just set up remote access from my home laptop to my work computer. for some reason i am having problems with panning using the wheel button on my mouse. instead of panning it acts as a right click function and brings up the menu. Could this just be down to the mouse itself?
View 3 RepliesI have a question regarding Vault. We are using Vault Collaboration 2012 and as of lately we have a user who live in a different county who is going work for us. We are 3 local users who sit locally and 1 user who going to connect remotely to us.
What is the best way to accomplish this, so he can get access to our projects and library’s, from where he is working?
We have a number of remote users who must have access to our files via Inventor Viewer. When reviewing the system requirements for Inventor Viewer 2014, I noticed that it lists only Windows 7 and Windows 8. Was XP omitted by mistake, or will Inv Viewer truly not work on machines running XP?
View 6 Replies View RelatedOne of our employees logs in remotely to a local PC running Revit via terminal services so that all work is done on the local network. The employee is acting through screenshots. All worked well using 2009 Revit or Architecture on XP machines. However, we added new faster Windows 7 machines with 2012 products. The PCs are all 64 bit with 16g RAM and a 22mb internet connection.
View 3 Replies View RelatedI sometimes need to access my parents' PC for various reasons (ie. changing colour settings/fixing email probs) when I'm away from home. On our old Mac we used to use Timbuktu, which was quite good, but now we have a PC I believe there are better PC-PC remote access tools.
View 8 Replies View RelatedI work for a large enterprise that has many machines(all the same) that have Inventor 2010 with the 3GB switch enabled. However, when a user tries to remotely connect the machine with the switch enabled, using Windows RDC, they are unable to. After removing the switch, the user is able to remote successfully. Other forums suggested that the "SessionImageSpace" in the registry needed to be edited to allow for the connection, but that did not work for me.
Machine Info:
Dell T3500 Workstation
Xeon Quad Core 2.8GHz
6GB RAM
NVidia Quadro FX4800 2GB
Windows XP SP3
My company has recently bought out a smaller firm. IT has setup everything through our "pipeline" so that there is a direct connection to both offices. The servers are all mapped pretty much identically and we are beginning to work on the same projects between the offices. However, this is putting a huge lag on the "pipeline" slowing down all the data going back and forth. Now they would like the Technicians to refrain from opening drawing files over the network.
So, I am wondering if the CLOUD is an option to handle this for our shared projects? Or Vault?
Civil 3D 2011
Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
8Gb RAM
Civil 3D 2013
Just loaded 2013. Of course right away I get an error. "Internet access is required to access the Help" Well as you can see I have internet access.
View 4 Replies View RelatedI am just starting to use ilogic for some design files. We have two design sites connected with Vault Collaboration 2012.
What is the best practice for sharing the ilogic rules between the sites?
I was planning on making an ilogic rules folder at the root of my workspace and having Vault manage the external rules. However, I don't see the rules listed when I check-in a file that uses them.
Do I have to add the rules to my template files? If so, how do I make changes to the rules without editing every file created with the templates?
We will be moving to Vault and IV 2014 after the first of the year, if that makes any difference.
i install autodesk remote to try it out from home. when i went to my office to the actual work station i rebooted my machine and now im getting a popup box that says my menu file is write protected. i uninstalled the file, and rebooted my machine and im still getting this warning that my menu is write protected,. no other work station is getting this error, the menu file is a shared file running off a network and no other versions exists on my hard drive.
View 2 Replies View RelatedIs it possible to pan within the viewport. I find that I am constantly trying to chase the right part of the drawing for the viewport using the viewport resize handles. Worst is if I scale in and loose the part of the drawing I wanted to show and have to use the handles again to make the viewport really large to find the spot that way.
I have worked out the scaling but the panning within the viewport would be really useful.
Is there a way to pan/move an existing Paperspace Viewport to a defined coordinate? For example you can rotate a Paperspace Viewport with the UCS and Plan view commands
To rotate a view by changing the UCS
Double-click within the viewport whose objects you want to rotate. Make sure that the current UCS is parallel to the plane of rotation (the UCS icon should look normal). If the UCS is not parallel to the plane of rotation, click Tools menu New UCS View.If the UCS is not parallel to the plane of rotation, at the Command prompt, enter ucs. Click Tools menu New UCS Z.At the Command prompt, enter ucs. To rotate the view 90 degrees clockwise, enter 90. To rotate the view 90 degrees counter-clockwise, enter -90. Click View menu 3D Views Plan View Current UCS.At the Command prompt, enter plan. The entire view rotates within the viewport. You may need to specify the scale of the viewport again.
I am copying layout views with a tilteblock and viewport. Going to the new view and having to pan orthagonally down 50 units. I tried setting up named ucs for the 2 locations but that didn't move the viewport as I would thought.
I am using AutoCad 2012 and have just gotten a new screen and Logitech mouse. I can't get the scroll wheel to pan for me. When I press the scroll wheel I see a zoom button on the screen instead of a pan symbol.
View 1 Replies View RelatedI am tasked with tidying up some drawings that have been exported from Vectorworks and it seems there is a fundamental problem with the drawing.
Some lines do not appear when viewing the drawing, they only appear when panning or when I select all. There are some cases where a line disappears behind a rectangle as if it had a hatch fill yet no such thing exists.
I have attached the drawing in question.
I am using AutoCAD 2012 for Mac.
I am trying to create a rollover that when you mouse over the text the images in the box change from black & white to colour.
View 1 Replies View RelatedI use Remote Desktop quite a bit to login to my computer and use programs installed on there. A frequent one is Adobe Photoshop. When I do my work in Remote Desktop everything works great, but when I'm actually at home on my pc it loads everything and the splash screen goes away and then all of a sudden it has "Photoshop CS4 has stopped working" error.
It turns out it is doing this with all of my adobe products. I am using Vista 32-Bit and all the products are CS4. One more thing I noticed is if I open Photoshop in remote desktop then login to my computer I can use it without error.
When I pan around a drawing by holding down the scroll wheel of the mouse button, I sometimes pan quite slowly, AutoCAD decides to zoom to extents. I know I have not double clicked the scroll wheel.
View 3 Replies View RelatedI've recently installed a microsoft wireless mouse. I'm having issues because the middle wheel doesn't pan when pressed down. I've searched the discussion forums at the Autodesk (both Lt & full ACAD) site, and can see this has been discussed previously, but the accepted remedy of control panel/mouse settings and ensuring that the mouse wheel is set to "middle click" is listed (and selected), but doesn't have any effect. I have MBUTTONPAN set to 1. I'm not sure what else needs to be done to get the middle button to pan.
View 9 Replies View RelatedI have an issue when working in paper space in an active viewport. As a quick change i want to move a few items and im zoomed in to do so. Problem is, when i select some items, then pan with the 3rd button on the mouse to select more items, it deselcts all the items i previously just selected.
Is there a fix or something i need to change in options for this? In AutoCAD 2011 there is no problem, but my upgrade to 2013 has the issue and its such a pain, i've reverted to the old program.
I know that we can have precision movement within viewport using -pan. However that panning is limited to the active viewport, 1 at a time by double clicking in the viewport. Is there a way to apply -pan to a number of viewports, say I want to move all the model space irrespective of scale 300 mm to the west or 100 mm to the north in more than 1 viewport.
View 9 Replies View RelatedI had my ACAD window up and another window up at the same time. I thought I was in the other window and pushed some sort of CTRL+(something) command but it enabled in ACAD since it was my active window. Well, I don't know what I pressed but now when I have something selected (with no command running) and try to pan to select additional items, the panning results in deselecting everything I had previously selected.
As you imagine this is quite annoying... I tried searching for something but the only thing I found was the command "pickadd". I tried the different settings for this and none worked. I can not remember what CTRL+ command I pressed... When the window popped up in ACAD, I just closed out of it real quick without (or at least I thought without) clicking anything.
When i go into Edit > Remote Connections and enable it, then set a password and click ok, I get the following error:"Could not complete the Remote Connections command because of a program error"
This used to work fine, not sure what has changed. On win7 x64. CS5.5 Extended (12.1), when i try to connect and send a script, I always get: "Error handling network messge". I suppose these two are related?
Is it possible to do remote image rollovers in PS7? For example when I move the mouse over a link text or button an image on another part of the page changes.
If this is not possible in PS can I do it in deamweaver instead? I've seen a tutorial of it done in Fireworks but I dont use fireworks anymore.
I have a network of 18 computers that I currently send Network rendering jobs to whilst on the same network whilst being in the same room as them.
I would like to be able to join the network from a remote location through broadband internet, through the router on that network and submit a job to the manager and access all the files on the network from the remote machine as if I was plugged into the ethernet hub on the network.
What would be the best way to achieve this?
how to fix completely black viewports when using Remote Desktop? I can't see my model via remote desktop. It worked fine before. Not sure what changed to make it now not work.
View 3 Replies View RelatedBeen using Paint.NET for years, but mainly very simple stuff all revolving around making buttons for various touch screen remotes I've had over the years.
I'm now doing a whole new set of buttons for an iPad app I'm using and one thing's got me stuck. I've downloaded a bunch of TV channel logos (130 x 90) and I want to put them on buttons. The logos all have white backgrounds, but my buttons are dark grey. I can get rid of the white backgound no problem using the magic wand, but that leaves me with the dither to white around the image, and when I put this onto the dark backgound it looks terrible. The dither seems very important due to the small image size. I guess what I'm trying to do is change a 'dither to white' to a 'dither to dark grey'. How do I do this ?
When i use panning in 2D mode the drawing disappears from my viewport. Autocad and all tools are still visible but there is nothing in drawing screen. When i zoom extent(z+e) it comes back again but in a couple minutes it disappears again while i am panning.
View 9 Replies View RelatedMy laptop died recently and I had to get a new one then reinstall my AutoCAD 2010 software. Trouble is the mouse wheel no longer zooms or, when held down, pans any more. I have spent the last couple of hours trying to sort this but to no avail - nothing happens when I use the mousewheel at all. SO frustrating as I use this all the time!
I run Windows 7 Pro OS and the mouse is a fairly basic HP model with two buttons and a wheel. (maybe I need to upgrade the thing...!)
Since installing SP1, I have noticed "ghosting" when panning/zooming in paperspace i.e. the original image is still visible. The only solution I have found is to turn off Hardware Acceleration and then turn it back on.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I have just noticed that while in Isometric view I can Pan an item in the window by pressing the arrow keys on a keyboard. One thing however is that to pan to the right side of the screen I have to press left arrow key. It is sort of pressing the "wrong" key to get the model slide to the "right" direction.
View 6 Replies View RelatedI am trying to select some portion of my drawing for layer change, but when I panning the view for additional selection, I lost the grips of first selected entities.
View 2 Replies View Related