Revit :: Blinking Screen When Panning Or Zooming?
Jan 16, 2012
I'm using a student version of RAC 2011 and everything works out well upon installation. My problem is that whenever I pan or zoom in on my model, the screen will blink black and white, and at certain zoom level, the screen stays all black. I'm using an ASUS K52jc-Ex303 laptop with the following specs:
Operating System: Windows 7 Ultimate 32-bit
Processor: Intel Intel® Core™i3-370 2.40 GHz
Memory: 4GB DDR3
Graphics Card: NVIDIA Geforce 310M
I have already installed the latest drivers from nvidia, which doesn't seem to work.
Matter of fact, it's so bad, that i'm always forced to turn off hardware acceleration which is a headache especially with large-scale models and it keeps on crashing.
I understand the fact that this GPU was built for gaming, and its not listed in the list of recommended graphics cards by autodesk. (I get the some features... message everytime i open RAC) My question is, is there anyway I can tweak the settings within the nvidia control panel to improve this issue on my revit architecture 2011?
View 1 Replies
ADVERTISEMENT
Dec 20, 2012
When I pan around a drawing by holding down the scroll wheel of the mouse button, I sometimes pan quite slowly, AutoCAD decides to zoom to extents. I know I have not double clicked the scroll wheel.
View 3 Replies
View Related
Mar 16, 2009
I don't mean the Zoom Tool, but simple zoom in/out operations. I seem to recall that the default behaviour in Photoshop was that you zoomed with Ctrl+mousewheel scrolling, and if you just scrolled, then the picture would pan up/down (vertically). And you could untick the "Zoom with scroll wheel" option if you didn't want Ctrl+scroll to mean "zoom".
However for a while now, having that option ticked seems to mean that scrolling (with no Ctrl) is all it takes to zoom in/out, and if you untick the option then you need to press Alt+scroll to zoom; in either case, there is no shortcut for panningup/down.
Anyway, whether this was really ever the case or not, my question is: is it somehow possible to make it so Ctrl+scroll zooms and (simple) scroll pans vertically?
View 1 Replies
View Related
Nov 7, 2011
I thought I would just check with the experts before I go down a road that may be a dead end.
What I am trying to do can best be described if you happen to have watched some of the Harry Potter movies, where they walk down a staircase that has all the historical paintings on the wall. Unlike standard paintings, these ones take on a life of their own and have movement inside the frame.
I would love to do something similar, albeit in a simpler fashion, by having a large static image on the main track, containing several picture frames, and then pan and zoom around this static image looking at all the moving images (videos) in the picture frames.
One thought I had was to create a very large images (4000 X 3000) containing all the picture frames. Then, in the overlay tracks I would place all the videos that would represent the moving paintings. The videos would be lined up with the picture frames using the picture-in-picture effect, and then I would pan-and-zoom around the static image viewing all the videos as they played simultaneously in the overlay tracks.
I fear there are several problems with this strategy, the central issue being that when I pan-and-zoom the main track, the overlay tracks wont pan-and-zoom with it.... Perhaps I could move the videos around the screen in sync with the pan-and-zoom, but that seems pretty difficult.
Is what I am trying to do even practical in VS Pro X4?
View 7 Replies
View Related
Mar 23, 2012
My laptop died recently and I had to get a new one then reinstall my AutoCAD 2010 software. Trouble is the mouse wheel no longer zooms or, when held down, pans any more. I have spent the last couple of hours trying to sort this but to no avail - nothing happens when I use the mousewheel at all. SO frustrating as I use this all the time!
I run Windows 7 Pro OS and the mouse is a fairly basic HP model with two buttons and a wheel. (maybe I need to upgrade the thing...!)
View 1 Replies
View Related
Jan 9, 2013
Since installing SP1, I have noticed "ghosting" when panning/zooming in paperspace i.e. the original image is still visible. The only solution I have found is to turn off Hardware Acceleration and then turn it back on.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 2 Replies
View Related
Mar 8, 2013
So recently I started making something in Inventor, and like most programs you can press the middle mouse button and it will pan or orbit. Well I'm pretty sure that in the past if I pressed the middle mpuse button it would pan or orbit. But now it is zooming all for the model, and only when it is zoomed to the whole model does it let me pan or rotate. If I were to zoom in on a line for example and wanted to pan to the right, it zooms me out to the whole model, and then I can pan. I have tried multiple mouse buttona all combinations of shift ctrl and alt and middle mosue, but nothing is working. How can I make it so it does not zoom all when clicking the middle mouse?
View 1 Replies
View Related
Apr 4, 2013
Is there a way to enable apple trackpad zooming and panning?
View 1 Replies
View Related
Jul 21, 2010
I guess because the view is actually saved, but is there a way to disable view saving or any other way that an UNCHANGED drawing does not ask me to save?
This is related to the option to combine zoom and pan actions in undo, but what I really want is to remove them from undo completely. That way if you zoom out you could see what changes, and you wouldn't LOSE THE ABILITY TO REDO by zooming.
Optimally, AUTOCAD could ask for each drawing whether it should save, and then save the ones that you selected, together. This way you could just leave the application to save and tab to something else
I'd be really happy to see this option in future releases. Because when you undo you can't always see the change, and being able to zoom/pan independently of the action history would mean that you can look at the drawing without losing the latest drawing.
View 9 Replies
View Related
Aug 14, 2012
I've installed Illustrator CS6 recently and found the behavior of panning with the scroll wheel annoying. When I have low zoom values (e.g. 75%) the scroll wheel lets me pan U-D, L-R at normal speed, but if I zoom in (200% and up), the panning slows to a point where it is unusable at 600% and up. I use [Shift] to speed it up but at high zoom levels it's not enough. This wasn't the case for Illustrator CS5 or 5.5 where panning with the scroll wheel worked at the same speed at any zoom level.
View 1 Replies
View Related
Feb 10, 2013
I have bad screen tearing in gimp 2.8 in windows 7 x64, making it almost unusable! (see youtube link: [URL] look around 15 seconds into the video )
i just reinstalled windows after using linux for a few months , gimp worked fine in linux (ubuntu x64) with the same hardware. i had the problem before in windows and i have it again with a fresh install
i have tried gimp 2.8.0, 2.8.2 and the same problem with the new one (2.8.4), same problem aswell with gimp 2.9 development builds. gimp 2.6 works fine with no screen tearing at all.
hardware specs:CPU: Intel® Core™ i5-2500K CPU @ 3.30GHz (3292.53 MHz)Memory: 16368 MB
OS Version: Microsoft Windows 7 64-bit Service Pack 1 (Build 7601)Graphics Card Vendor: NVIDIA CorporationGraphics Card: GeForce GTX 460/PCIe/SSE2Graphics Driver version: 310.90
View 5 Replies
View Related
Feb 10, 2013
Did you get the driver from nvidia's Web site? Check for firmware anddriver updates first.Yes a bad move :P but i need to use some software that's not compatible with linux.
An obvious 'solution' is to install Linux as a VM under Virtualbox.
View 2 Replies
View Related
Feb 10, 2013
I have bad screen tearing in gimp 2.8 in windows 7 x64, making it almost unusable! (see youtube link: [URL] look around 15 seconds into the video )
i just reinstalled windows after using linux for a few months , gimp worked fine in linux (ubuntu x64) with the same hardware. i had the problem before in windows and i have it again with a fresh install
i have tried gimp 2.8.0, 2.8.2 and the same problem with the new one (2.8.4), same problem aswell with gimp 2.9 development builds. gimp 2.6 works fine with no screen tearing at all.
hardware specs:
CPU: Intel® Core™ i5-2500K CPU @ 3.30GHz (3292.53 MHz)
Memory: 16368 MB
OS Version: Microsoft Windows 7 64-bit Service Pack 1 (Build 7601)
Graphics Card Vendor: NVIDIA Corporation
Graphics Card: GeForce GTX 460/PCIe/SSE2
Graphics Driver version: 310.90
View 1 Replies
View Related
Oct 7, 2012
I would like to try Photoshop for digital art. I downloaded the 30 day trial version of Adobe Illustrator CS 6 about three days ago and noticed immediately that touching my laptop’s touch screen will only allow me to pan using the Hand Tool in Photoshop. I have never had this problem in Adobe Illustrator, as using the touch screen acts just as if I were clicking the left mouse button and dragging the cursor around the screen. I have a Dell XPS 15 - L502X laptop with an integrated touch screen (the entire 15” screen is Multi-touch sensitive). It is running N-Trig DuoSense Digitizer with the latest drivers. Is there some simple setting change that can be done within Photoshop CS6 to make it recognize a touch screen input as a normal left click and thus allow me to draw on it using the pen, pencil, or paintbrush tool? I find it quite odd that I have no problems with this in Illustrator CS6. Could it be that this tablet-like touch screen input is restricted on the trial version?
Here is a link to a youtube video that I put up showing the problem. The first program shown in the video is Adobe Illustrator CS6 using the Paintbrush tool. The second program shown is Adobe Photosop CS6 using the pencil tool. I draw the line in Ps using the mouse pad and then attempt to draw (still using the pencil tool) on the touch screen yielding only scrolling with the hand tool.
[URL]
Here's my system specs copy pasted right from PhotoShop.
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
[code]...
View 1 Replies
View Related
Dec 18, 2012
I'm not quite sure how to search for this, so it may be in here, but I'm not finding it........
Windows 7, 64-bit, 12GB of memory, Photoshop CS6, LR4.
In Photoshop, a normal Nikon D300 image, opened from LR4. I have my normal complement of layers for cloning/healing, dodging, burning, curves, hue/sat, etc.
EVERY ONCE IN A WHILE - not consistent, no idea what provokes it - I zoom in while cloning to clean up some small area, and at some point in the zooming, my image disappears and I have the white/gray series of boxes on the entire screen (the thing that shows up when you increase canvas and there's no image on that part)... I can zoom back out, and all of a sudden I have an image again. Zooming in makes it disappear. I have the clone tool set to "Sample All Layers", so it shouldn't be seeing a blank layer, and IT WORKS FINE ALMOST ALL THE TIME.
I've tried closing the image and reopening it, but that made no difference. Did the same thing.
I have to shut down Photoshop and restart it, and then it typically works when zooming in the same way on the same image...
Is this a memory issue (12GB isn't enough for CS6?) or do I have something configured wrong?
View 11 Replies
View Related
Nov 30, 2011
I'm having a technical question with a customers Revit Architecture 2012. The project he's working on is about 90 Megabytes in size, and the references are about 60MB. He is storing these on a network share. Unfortunately they are still on a 100MBit network. As Workstation he is using a DELL Precision M6500 (notebook) with the following specs:
when he is trying to zoom in on and out of this project, he is experiencing high waiting time between the zoom-steps, sometimes unbearably long. As the notebook is brandnew and tested I didn't blame it on faulty hardware. So I suggested to run the same Project on a different machine.
I don't know much about the software architecture of Revit Architecture, so i don't know which hardware component is mostly stressed when zooming in and out (guessing the gfx, because the project needs to be recalculated?). I guess there lies the bottleneck.The customer requested an answer, which hardware needs to be exchanged / upgraded in order to accelerate the zoom-steps, decrease the latency.
View 1 Replies
View Related
Jul 3, 2013
I was not informed that Photoshop CS6 CC did not work on windows 8. I have a major blinking problem. How do I get rid of it?
View 9 Replies
View Related
Jan 27, 2007
Is there a easy way to make a text blink on photoshop. i am using photoshop 7.0. ..
View 8 Replies
View Related
Jan 5, 2003
how to make a blinking picute in image ready? I want it to blink like 6 diffrent pictures on a tv Screen.
View 4 Replies
View Related
Oct 19, 2004
When it happened this time I had selected the Elliptical Marquee tool and created a circle on an object. I then chose the clone stamp tool and proceeded to clone inside the circle. I was just using the circle as a guide for the area I wanted to clone. When I did this I noticed that the clone tool cursor would blink on and off it will also keep on blinking as I move the cursor outside of the circle for a small distance and then if I keep on moving away from the circle it will eventually stop blinking.
View 9 Replies
View Related
Jul 4, 2005
After using PS CS2 for about an hour the cursor starts blinking - alternating rapidly between the tool and plain cursor. I have two registered copies of CS2 on two different Macs (Panther on a G5, Tiger on a G4 Powerbook) and they both exhibit the same behavior.
View 4 Replies
View Related
Mar 19, 2013
I have a new desktop computer with Windows 8 on it with a 1 TB hard drive and about 12 gb of RAM. I installed PS CS6 and it works but for some reason the application windows blinks off and on when I am using it.
View 6 Replies
View Related
Jun 21, 2012
Recently when typing anything in corel the blinking indicator that lets me know where I'm typing has disappeared. This has become a huge problem for me and my job. Did I accidentally turn it off somewhere in options?
View 3 Replies
View Related
Oct 26, 2002
I'm trying to make a small heart (like 30x30 pixels) that sparkles/blinks. Now, can I do this in Photoshop or Image Ready? I've tried everything in PS.
View 3 Replies
View Related
Nov 15, 2008
i have Photoshop CS3.
i started my own business selling xbox controllers on ebay and i would like to make a picture that is of a xbox controller but a blinking light in the middle, and i want to make 3 pictures with different speeds.
i got the idea from another persons ebay page and i tried to copy the picture so i can put it on this forums but the page wont let me right click so im going give the item number and just look at the picture to see what im talking about Item number: 330286213529 go to ebay and type that item number in and look at the page
but i dont want that exact button blinking i want this button blinking red in the middle of the xbox controller.
View 2 Replies
View Related
Nov 16, 2011
How to animate this pic to make it look like the eye is blinking?
View 1 Replies
View Related
Jun 11, 2013
I am using PS CS6 on a Mac desktop. I have had it installed for a few months now. A few days ago when I used the paintbrush tool it started blinking between the tool and a black arrow making it very difficult to paint. Today it does this with every tool I select.
View 2 Replies
View Related
Aug 20, 2008
I have deleted the PS preferances file to correct this problem only to have the problem re-occur when PS is re-started.
With a tool selected, the mode menu drops down and returns before a selection maybe made. Unusable situation.
I have returned to CS2 as a work around.
View 6 Replies
View Related
Sep 16, 2008
I am running 2009 SP1 on a 32-bit machine. When I move the mouse in Inventor, the View Cube blinks. This started before installing SP1, but not as often. Now it blinks constantly as I move the mouse. I have re-installed the mouse driver, but that did not work.
View 3 Replies
View Related
Aug 18, 2012
after several minutes working on a dwg file the file goes into a blinking mode. The only way that i can get out of the drawing is control at delete.
View 1 Replies
View Related
Oct 15, 2012
For the past 2 months I've been using a Yiynova 10.1 tablet to design in Illustrator CS6. Later today I have an issue where the cursor would be on place but immediately move to a random area on screen. It is quick and I can keep my pen to point where I need to. However, everytime when I do close Illustrator the tablet seems to work perfectly. Photoshop and other programs seem to respond well with the pen and tablet, but Illustrator doesn't. I have ran a windows compatibility to all previous versions of windows and there are no results. I have reinstalled my Illustrator CS6 and the tablet doesn't want to play well still.
View 2 Replies
View Related
