After using PS CS2 for about an hour the cursor starts blinking - alternating rapidly between the tool and plain cursor. I have two registered copies of CS2 on two different Macs (Panther on a G5, Tiger on a G4 Powerbook) and they both exhibit the same behavior.
View 4 Replies
When it happened this time I had selected the Elliptical Marquee tool and created a circle on an object. I then chose the clone stamp tool and proceeded to clone inside the circle. I was just using the circle as a guide for the area I wanted to clone. When I did this I noticed that the clone tool cursor would blink on and off it will also keep on blinking as I move the cursor outside of the circle for a small distance and then if I keep on moving away from the circle it will eventually stop blinking.
View 9 Replies View RelatedFor the past 2 months I've been using a Yiynova 10.1 tablet to design in Illustrator CS6. Later today I have an issue where the cursor would be on place but immediately move to a random area on screen. It is quick and I can keep my pen to point where I need to. However, everytime when I do close Illustrator the tablet seems to work perfectly. Photoshop and other programs seem to respond well with the pen and tablet, but Illustrator doesn't. I have ran a windows compatibility to all previous versions of windows and there are no results. I have reinstalled my Illustrator CS6 and the tablet doesn't want to play well still.
View 2 Replies View RelatedOne of my co-worker has this problem with his cursor's crosshairs. When he moves his cursor the crosshairs are like blinking or sort of flashing. It's not that big of a problem but it's just getting anoying in a short while.
View 9 Replies View RelatedI was not informed that Photoshop CS6 CC did not work on windows 8. I have a major blinking problem. How do I get rid of it?
View 9 Replies View RelatedIs there a easy way to make a text blink on photoshop. i am using photoshop 7.0. ..
View 8 Replies View Relatedhow to make a blinking picute in image ready? I want it to blink like 6 diffrent pictures on a tv Screen.
View 4 Replies View RelatedI have a new desktop computer with Windows 8 on it with a 1 TB hard drive and about 12 gb of RAM. I installed PS CS6 and it works but for some reason the application windows blinks off and on when I am using it.Â
View 6 Replies View RelatedI'm trying to make a small heart (like 30x30 pixels) that sparkles/blinks. Now, can I do this in Photoshop or Image Ready? I've tried everything in PS.
View 3 Replies View Relatedi have Photoshop CS3.
i started my own business selling xbox controllers on ebay and i would like to make a picture that is of a xbox controller but a blinking light in the middle, and i want to make 3 pictures with different speeds.
i got the idea from another persons ebay page and i tried to copy the picture so i can put it on this forums but the page wont let me right click so im going give the item number and just look at the picture to see what im talking about Item number: 330286213529 go to ebay and type that item number in and look at the page
but i dont want that exact button blinking i want this button blinking red in the middle of the xbox controller.
I am using PS CS6 on a Mac desktop. I have had it installed for a few months now. A few days ago when I used the paintbrush tool it started blinking between the tool and a black arrow making it very difficult to paint. Today it does this with every tool I select.
View 2 Replies View RelatedI have deleted the PS preferances file to correct this problem only to have the problem re-occur when PS is re-started.
With a tool selected, the mode menu drops down and returns before a selection maybe made. Unusable situation.
I have returned to CS2 as a work around.
Recently when typing anything in corel the blinking indicator that lets me know where I'm typing has disappeared. This has become a huge problem for me and my job. Did I accidentally turn it off somewhere in options?
View 3 Replies View RelatedHow to animate this pic to make it look like the eye is blinking?
View 1 Replies View RelatedI'm using a student version of RAC 2011 and everything works out well upon installation. My problem is that whenever I pan or zoom in on my model, the screen will blink black and white, and at certain zoom level, the screen stays all black. I'm using an ASUS K52jc-Ex303 laptop with the following specs:
Operating System: Windows 7 Ultimate 32-bit
Processor: Intel Intel® Core™i3-370 2.40 GHz
Memory: 4GB DDR3Â
Graphics Card: NVIDIA Geforce 310M
I have already installed the latest drivers from nvidia, which doesn't seem to work.
Matter of fact, it's so bad, that i'm always forced to turn off hardware acceleration which is a headache especially with large-scale models and it keeps on crashing.
I understand the fact that this GPU was built for gaming, and its not listed in the list of recommended graphics cards by autodesk. (I get the some features... message everytime i open RAC) My question is, is there anyway I can tweak the settings within the nvidia control panel to improve this issue on my revit architecture 2011?
I am running 2009 SP1 on a 32-bit machine. When I move the mouse in Inventor, the View Cube blinks. This started before installing SP1, but not as often. Now it blinks constantly as I move the mouse. I have re-installed the mouse driver, but that did not work.
View 3 Replies View Relatedafter several minutes working on a dwg file the file goes into a blinking mode. The only way that i can get out of the drawing is control at delete.
View 1 Replies View RelatedI've got the following problem: I've created some files in older version No. 12. The file contains just rectangles, some simple text and pasted photos... When I install the newer version either X4 or X5, the all photos and other object start blinking and I cannot do anything with them at all... But I can see them just after I zoom in to male everything very large...
View 14 Replies View RelatedMy cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
In Xcode, we have to define cursor as:
Â
resource 'CURS' (16001) {
   $"00 00 00 00"
   $"18 00 3C 00"
   $"1E 00 0F 00"
   $"07 80 03 C8"
   $"01 E8 00 FC"
[Code]...
Â
In Windows we use .cur file, simpler.
Â
I want to convert .cur file to the mac format above, how?
Photoshop CS3 and have stumbled across a bit of a problem. It seems that I have managed to lock my Photoshop file from all editing as I am unable to use any tool apart from the Hand Tool.
View 6 Replies View Relatedhow to prevent photoshop from automatically changing cursors from BRUSH SIZE to the precise?.
I've tried the reset but it does not work.
i downloaded the trial version of Photoshop CS4, and as soon as i installed it i had this problem. when i use the tablet, it would be fine and prefectly responsive however, if i walk away from the laptop for about 20secs or more, i just cant seem to get any response on photoshop when i use the tableti am not sure what is the real cause of the problem but its a constant annoyance, and the only way i can solve it, is to exit photoshop, and start it up again.only to have the same thing occur if i pause to do something else or alt+tab to check my email or whatever... i can confirm that theres nothing wrong with my tablet as it works for my other programs like Manga Studio EX or MS paint(lol)so i have NO idea why it is so buggy on Photoshop CS4. photoshop and vista just doesnt seem to get along... last year i bought photoshop CS3, installed it on my laptop(vista)
View 3 Replies View RelatedI've been trying the trial of CS3, and I'm encountering major performance issues which I can't fathom.
At first I tried it on my old machine, which was good for its time, but perhaps getting a little dated.
I built a new computer just last week, which is very powerful (Intel Core 2 Duo E8400; GeIL 4GB 1066MHz memory; Nvidia GTX 260) and CS3 performance is even worse than it was on my old machine.
Simply moving the mouse around on screen results in horrendous lag (the screen flashes each time this happens) to the point where it's so frustrating to use that I close the program. It generally runs fine; it opens and loads files and does its thing without any problems, and I've certainly noticed a big increase in performance when opening massive files, but moving the actual curser around the screen is an absolute nightmare, which results in general use being a nightmare. Zooming in and out with the scroll-wheel makes the whole screen flash too.
I haven't got a clue what's causing this, as people I know who use CS3 haven't encountered the problem. CS2 runs like a dream.
The OS I was using on my old machine was XP (32 bit), while I'm now using Vista 64.
I am having trouble with my tool cursors. Sometimes the crop tool changes to a crosshair and every brush size will only produce a small crosshhair cursor. This makes it impossible to see the area being worked on.
Rebooting fixes things for a very short time. Deleting preferences didn't work. And even a reinstall went bad after a few hours work. I have a P4 2.8GH processor and 1 gig RAM on XP Pro. Shouldn't those resources be sufficient to handle things?
creating some effects with an image, I've done something inadvertantly that has made my erase and brush cursor into a crosshair looking thing.,.. the sizing keys ([) (]) have no effect on it... no circle that grows and shinks when pressing left and right bracket. Checking at Edit/preferences/cursors... I see default setting I think:Painting Cursors=Normal Brush tipOther=standard
View 3 Replies View RelatedDouble cursor issue in CS5/6?
Â
As I enlarge my cursor (for brushes, healing tools, whatever) at some undetermined point (different for all pictures) suddenly another cursor appears in the top left corner of CS5/CS6.The cursor is a duplicate of the cursor I am working with, stays in the top left corner of the app, and enlarges and shrinks as I scroll my mouse wheel up and down or use the [ and ] keys or however I enlarge and shrink my cursor.
Â
I have tried the desktop 99% thing, it doesn't work.
I have tried Graphics Card on and off, it doesn't work
I have tried wiping out my settings and starting from scratch, it doesn't work
I installed CS6 over my CS5, it doesn't work
I have tried everything along these lines and nothing is working!
[URL] .....
how to get the cursor to stop disappearing in pscs6 both on tablet and mouse.
View 3 Replies View RelatedI am running Mountain Lion on an older iMac (2007) 4 gb ram, and newer (2011) Macbook Pro with 8 gb of ram. Cursor disappears and will not comeback without click in finder or another program.
View 30 Replies View Relatedi don't have a normal cursor, which in my case is an arrow. instead i have what looks like three tiny hands in a row. this makes it very difficult to be accurate when cropping, or tilting. i uninstalled and reinstalled, to no avail. i'm using cs4 extended
View 2 Replies View RelatedI'm still playing around with CS-2 on the Mac and have got a question about adjusting how much the cursor will move, can't seem to find a place to adjust it.
I had cut out an object from one photo and was trying to place it on another photo. However it dosn't seem to want to move exactly to the place I would like to put it. The increments seem to be large when I try to move it around.
