AutoCad 2D :: Change Object Scale But Keep Dimensions The Same?
Sep 12, 2011
I am currently working on the drawing which I initially didnt have a template for (ie the border for the A1 page this drawing will be printed on) so off I went and started drawing using a scale of 1 drawing units = 1mm.
Now I have been given the border and the drawing I have comes no where near fitting on the sheet so I want to select all of the drawing and change the scale but I obviously don't want the dimensions to change. How can I achieve this?
I also need to know as there are certain parts of the drawings that need zoomed in views so all I want to do is copy the parts I have drawn and increase the scale but again keep the dimensions the same.
View 9 Replies
ADVERTISEMENT
Jun 22, 2011
After using autocad for a while, I got some questions i'd like to ask.
1) In my line of work, I have to label the items I draw in every CAD file, multileader is a nice tool to have but how do I keep the styles I make so that it "transfers" over to a new CAD file?
I have to keep making a new style everytime I create a new drawing. I would like for the default style to stay after I edit it.
2) Is there a way or command that lets me scale an object to exact dimensions? For example, I have a 800 by 750 table in my block library, the size I need is 950 by 820, normally I would have to explode it then stretch it manually on the x and y axis, is there a way to scale it up to 950 by 820 through a command?
3) I don't know what I hit, but I can't seem to select multiple objects just by clicking on them anymore, I now have to hold down the SHIFT key. How do I revert this?
View 1 Replies
View Related
Apr 10, 2013
I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
View 4 Replies
View Related
Oct 17, 2013
Mleader arrow head didn't change size when change the scale on Object property?
The Arrow head size didn't change corresponding to the scale, i included the pic below, the top picture, the arrow head was set at .18" but was really small when i plot out, so i wanted to make it bigger, when i changed to .50" or .75" or even 1" the arrow head became even smaller than .18". Only when .18" than the arrow side is legible
Mleader.jpg
View 9 Replies
View Related
Oct 5, 2011
For some reason I can't change the hatch pattern scale prior to hatching an object although after placing the hatch I can. The procedure I am using is as follows in LT2011. Select hatch, set the hatch style, over type the scale say to 100, click inside the area to hatch. Immediately the hatch pattern scale sets itself back to 1 I then have to type 100 back in and then the hatching will be set.
View 0 Replies
View Related
Dec 4, 2012
I was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies
View Related
Jun 27, 2013
When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
View 4 Replies
View Related
Apr 10, 2013
I would like to find a lisp that changes the scale of something that has an annotative scale and deletes all other scales in the object scale list. Often i have many different scales of existing dimensions or objects. i waste a lot of time opening the annotation object scale dialogue box, selecting add, finding my scale and deleting the old scale.
View 3 Replies
View Related
Aug 9, 2013
I have a serious problem with AutoCAD placing improperly scaled dimensions within viewports. I have a drawing where half of the dimensions are correctly scaled and the other half are off by as much as 4 times their value. This occurs randomly without any rhyme or reason- and sometimes occurs whenever a drawing is opened. I know of a couple of drawings that if I simply open them, a dozen dimensions will scale up to 12x their intended value. It has happened to everyone on my staff. We are using LT 2011- but I have had a similar problem using 2004 & 2007 full seats.
View 4 Replies
View Related
Jul 28, 2013
I've got .dxf files of parts that need to be manufactured, however in this instance I need to manufacture 3/4 scale versions of these parts. So far I've been simply printing the plans and using my trusty calculator to change the scale of the dimensions.
But now I've got a couple of pages in this set of plans that have over a thousand dimensions on them. It would be really cool if I could just open a dialog or enter a command and have all the dimension on the page multiplied by a scaler so I can print the plans with the correct dimensions on them.
Scaling the model has been suggested. I assume that when you scale a model that the dimensions automatically update. However, I have no idea if these .dxfs contain model information or just 2D plan data and I don't know how to check.
The second question of my post is only; Is there a way to view the actual size of the plans in auto cad? Sort of a "Display actual size" button?
View 9 Replies
View Related
Jan 11, 2013
I'd like to take a set of ordinate dimensions and multiply all the values by 10. Is this possible, without overriding the values and making them static?
The reason I'm asking is because I'm making a flat layout sketch for pockets around a drum. So imagine taking a drum and rolling it out flat. In the direction along the drum I drew it as 1" = 1" and for the circumfrence direction I did 1" = 10° so I don't have sketch that is 13" x 360". So I need to scale the dimensions in 1 direction up by 10.
View 1 Replies
View Related
May 28, 2013
I have a photograph of a house and measurements of the porch columns, windows, etc. When I scale it some of the measurements are correct while others are way off. The photo is angled a bit but I am only concerned with the porch.
porch2.jpg
View 9 Replies
View Related
Mar 15, 2013
I've just recently changed jobs and so I'm working on a new (to me) system with Autocad Mechanical 2013. I had been working with Mechanical 2010.
One (of the many) issues that is bothering me, is that I can't seem to scale resize individual dimension. Normally, I'd create the dimensions and then if I needed to tweak the fit, I'd go into the Properties pallet and change the overall scale under Fit. Not really a good standard of practice, I know...
But when I do that on my current system, the dimension doesn't change at all.
On top of that, I have a weird refresh problem. If I grab a dim by the grip and move/stretch it, it doesn't actually show the new position unless I Regen. Is that a setting or maybe just a slow reaction by my computer?
View 1 Replies
View Related
Aug 27, 2010
Modeling 1:1 in MS, dimensioning in PS different scaled viewports. Plotted from PS, did further work both in MS/PS and notice dimension readings have scaled up by 99.98% and 100% to what they were in hard copy. Changed dims in properties but for some reason they have reverted back to the percentage increase? For example I have a 5745mm truss span that is now a 574.5 meter spanning truss!!?? Haven’t altered dimstyle at all or any scalings. Laid another dimension again in PS along side the exaggerated one using same endpoints in order to check things and it’s fine.
Would like to know what has caused the dims to scale up in PS and, how to undo the problem, hoping not to have to re-dimension.
Attached is the dwg. and yes, I have dimensioned in MS but there was a reason. It’s PS that’s causing the grief.
View 9 Replies
View Related
Aug 8, 2013
When I try to scale a part in Autodesk Inventor Fusion, it asks to select a solid body, and reference point, but there is no option to change the scaling type to nonuniform. How to do it? I have Autodesk Inventor and Autodesk Inventor Fusion 2013.
View 2 Replies
View Related
Mar 16, 2012
IN this drawing, I want the 9.00 to be either 4 ( feet) or 48 (inches).
How do I set the correct scale in this or any drawing?
View 3 Replies
View Related
Jul 19, 2012
I have a drawing from an outside source which was not drawn to scale, and dimensioned in MS.. When trying to scale the drawing to 1:1, the dimensions lose their contents. When looking at the properties, the contents of the override do not jive with what is actually shown, and any attempt to edit, move, copy/paste, or scale the dimensions will delete the contents. I have not come across anything like this before. Drawing attached...
weird dimensions.dwg
View 9 Replies
View Related
Jun 21, 2011
I am using AutoCAD 2011. my scale being off for text, dimensions, inserting scalable blocks, xrefs, etc...
The problem is that when inserting, or creating text (or any of the above) in architectural scales everything is fine, however, when the scale is changed to an engineering scale, everything comes in at 1/12 the scale it is supposed to be - i.e. - when I create text it has to be scaled up by 12, it's like AutoCAD is just reading the 200 scale and not multiplying by the scaler of 2400.
View 9 Replies
View Related
Oct 9, 2012
Why the “dimensions” doesn’t respond as the “annotation scale” changes…
I’m wondering why the “dimensions” doesn’t respond as the “annotation scale” changes when the “Automatically add scales to annotative objects when the annotation scale changes” is OFF?
View 6 Replies
View Related
Oct 31, 2012
How can I set the multiple dimensions "ordinates" to scale correctly in base views. The old vanilla ordinate dims work fine, but power dims ordinate give me improper scaling.
View 2 Replies
View Related
Jun 21, 2013
At times when I am dimensioning a dwg in paperspace one of the dimensions will assume the viewport scale when the dwg does a regen. Its as if the DIMLFAC will be set to something other than 1but its only for one or two dimensions. I check the DIMLFAC var for thje dwg and its set properly to (1). Since I am dimensioning in paperspace i have the DIMASSOC set to (2).
As you can imagine this is a huge problem when I send the dwg out for fabrication. What is the problem and how can I stop this from happening on random dwgs to random dimensions?
View 5 Replies
View Related
Jul 4, 2013
How to scale drawing with dimension lines without changing dimensions in dimension lines? I got drawing with correct dimension lines but geometry is wrong.
View 7 Replies
View Related
Jul 8, 2013
I have a spreadsheet and iLogic driven mater assy to generate different iterations.
I would like to change the scale of a base view on a drawing based on a parameter in my assembly. The idea is to get iLogic to change the view using a simple If / Else statement.
This is what I tried:
If Parameter("0 Generic Assembly v2.2.iam.BP") < 1570 Then
ActiveSheet.View("VIEW1").Scale = 1/8
Else
ActiveSheet.View("VIEW1").Scale = 1/10
EndIf
So basically the value of "BP" parameter (excel parameter in my assy) would drive the scale of the views. But its not working. Is it actually a sensible method? Can I use in the drawing environment the excel parameters in my assembly?
This is the error message I get when the rule is run:
"Error in rule: View Scale, in document: 0 Generic Assembly v2.2.idw
Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))"
Also using the same thinking I use iLogic to populate the drg number field on the drawing based on an excel parameter. The rule works but does not always updates the drawing no upon the parameter change or update/rebuild commands.
View 1 Replies
View Related
Dec 14, 2013
Resizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 9 Replies
View Related
Jun 26, 2013
How to get the Dimensions of the object using vb.net code.
View 1 Replies
View Related
Aug 7, 2013
I need to dimension a line in the Z plane in the northeast view. The dimension is currently perpindicular to the dimension line. How to make it parallel with the dimension line.
View 1 Replies
View Related
Jul 18, 2011
I draw hundreds of trophy plates which have the same shape but not the same dimensions as inserted here
My question is How can I change the size of the outside rectangle while keeping the inside rectangle 3mm smaller with a 2mm scalloped corner.
View 11 Replies
View Related
Jun 7, 2012
i have a little drawing in modelspace. in paperspace, i have a viewport. let's say it's set at 1/4" = 1'-0". everything looks okay so far.
i click on the 'annotate' tab, and then select 'annotative' for my dimension style. it has the little triangle icon thingy so it should be annotative.
i make a couple of simple linear dimensions on my drawing (still in paperspace). looks okay so far.
but now lets say i want to change the scale of my drawing. i change it from 1/4" to 1/2" = 1'-0". my drawing gets bigger, but the dimensions stay the same size and position. they're no longer attached to anything on my drawing.
then i change the scale again, let's say back to 1/4" scale. my drawing shrinks, but as soon as it's back to it's original size, the dimensions now suddenly get twice as big and are where they should have been at 1/2".
and it continues like that, when i change my scale, the dimensions change to whatever the last scale was at, so that they're never synced up.
View 9 Replies
View Related
Apr 25, 2011
i'm wondering how to get orthographic views isometric view (with some dimentions) from an object ive already assembled with proengineer (student).
View 1 Replies
View Related
Jun 9, 2011
Is there a function in AutoCAD that lets you edit the dimensions of an existing object on fly like there is in Vectorworks.I have included an attachment of a vectorworks screen dump to explain what I'm asking. In the screen dump you can see a Rectangle is already drawn with the measurements of 1800,900 mm. This can be changed in Vectorworks via the dimension property box on the right hand side. Can this sort of thing be performed in AutoCAD?
View 2 Replies
View Related
May 26, 2011
When I add dimensions to an 3d object in an isometric (or similar) view, the dimension lines get placed way off screen, and the leader lines are projected onto the x-y plane.
Additionally, when I try to add lines to an object that is far from the x-y plane, the mouse position responds to the line's location as if it were drawing on the x-y plane.
Do I have to continually make custom UCS coordinates just to draw in 3d without hassle? There are other times when this does not happen (perhaps only when my 3d object is very near the x-y plane...
View 8 Replies
View Related
