AutoCad 2D :: Scale Being Off For Text / Dimensions / Inserting Scalable Blocks
Jun 21, 2011
I am using AutoCAD 2011. my scale being off for text, dimensions, inserting scalable blocks, xrefs, etc...
The problem is that when inserting, or creating text (or any of the above) in architectural scales everything is fine, however, when the scale is changed to an engineering scale, everything comes in at 1/12 the scale it is supposed to be - i.e. - when I create text it has to be scaled up by 12, it's like AutoCAD is just reading the 200 scale and not multiplying by the scaler of 2400.
I downloaded a block of a plan view of a wheelchair user so I can see just how much space there is available.
The block is dimensioned but when I insert it and measure its dimensions, the readings are different. For example, a dimension reads 1070mm but when I measure it, I get 1023mm. Not far out but when I measure a 150mm dimension, I get 83mm. A 460mm dimension is measured as 536mm.
I have a dynamic block that contains both geometry as well as text. I don't want the geometry to scale up based on the drawing scale but I do want the text to scle according to the drawing scale. I have tried making the text both annotative and non-annotative in the block and get the same result. I can get the text to scale properly if I make the entire block annotative but that also scales the geometry which is not accurate.
I have a block that I want to show on a vertical exaggeration of 10x. How do I make it so that a block has a Y scale of 10 without the attribute text inside the block being stretched in the Y direction 10x?
I would like to use a Y scale of 10 rather than a block with 10x the length because I have a field that returns a length parameter and I don't want that value to be 10x what it's supposed to be, and it would make things much easier to not have to multiply my values by 10x each time I use the block.
Any way to get a scale bar/title block text to reflect plotting at half size?
We use the common (24x36) sheet size for all projects, but when plotting we send out half size (12x18) as well. This means the scale bar reading 1"=40' is no longer correct. It should read 1"=20'. I would like to automate this.
I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
Which setting(s) do I need to change to avoid dimensions that "explode" after inserting into a project. Example, several Architects I deal with, when any dimension string is placed into the drawing, there is a prompt to either type in or hit enter for the dimension shown. I will save the drawing, but if I get into the drawing later and need to continue the dimension string, I cannot select the previous dimension as it is now just lines and text. I am using Autocad 2013 and have never been able to figure this out.
I am asking user for scale factor and insertion point. but the actual image always display width and height as the scale value, if i insert value of 5 for scale factor width and height will be 5 but not according to coordinates system.
but if i insert the same image manually width and height are calculated by autocad according to scale factor before insertion.
double scale = promptDoubleResult.Value; var xAxis = new Vector3d(scale, 0, 0); var yAxis = new Vector3d(0, scale, 0); var ucs = document.Editor.CurrentUserCoordinateSystem; using (Transaction trans = database.TransactionManager.StartTransaction()) { RasterImageDef rasterImageDef = new RasterImageDef(); rasterImageDef.SourceFileName = imagePath; rasterImageDef.Load(); [code]......
New to using VBA with AutCAD. On my drawing I have to plot some line which I am able to plot using VBA. But when it comes to delete those lines, I have to do it manually. So gave a try to BLOCKS.
When I run the macro, I get following error -Run-time error - 2145320929(802100f)
I am trying to insert some blocks that i read from CSV file. I am reading the values for X and Y position from a CSV file and inseting blocks with this values in AutoCAD.
I just created a dynamic block for our rev clouds, cause they're annoying to draw.
For some reason when I insert it, it is automatically inserting at 0,0. Why is it doing that? Also, if I put it into a Tool Palette (my boss just discovered these, so I'm creating a whole bunch for the company... those things are AWESOME) and when I use the Tool Palette, it works just fine.
Now, this won't be a problem as long as everyone uses the TP's I'm creating, but we have one Engineer in particular that's a toolbag and doesn't seem to remember to use all the stuff I spend all this time researching and programming.
I use the following code to create blocks in AutoCAD 2013. When the user goes to insert this block, the insert command does not show a preview of the block when moving the mouse to locate it, and it comes in exploded. This was working at one point, but something changed. Is there some setting in AutoCAD or through the API that would cause this behavior?
Document doc = Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Point3d p1 = new Point3d(0, 0, 0); Point3d p2 = new Point3d(10, 0, 0); Point3d p3 = new Point3d(10, 10, 0); using (Transaction Tx = db.TransactionManager.StartTransaction()) [code]....
Is there a way to insert CAD blocks into the Multiline text editor, much like you are able to insert a block into a Table.
I am asking for the sole purpose of Plan Notes. When we lay out Plan Notes originally we place the note bubble next to the line of text it represents. When we have to come back at a later time and edit the mtext, sometimes add a line our users are in a rush and forget to re-align the note bubbles with the text. If there was a way to insert the block into the text editor and have it still be able to edit it.
Is this a feature in 2013?
AutoCAD MEP 2013 Window 7 pro 64 bit E5440 (8 CPU) ~2.8ghZ 16GB RAM NVIDIA QUADRO FX 3500 2270MB
I need to insert the same block from a tool palette multiple times into my drawing. Is there a way to do this without having to pick the block from the tool palette every time I want to insert it?
When inserting certain blocks that were created in the 0 layer, they are not taking on the color of the layer in which I insert them.
Now when I click on the object, it shows up as being on the correct layer but the object is still white, I ran into something like this before, and was able to fix it by going into the Block Editor and setting the layer in there. This only happens on certain blocks.
I believe in our previous AutoCAD 2009 software we could create a block with attributes and save the drawing as a block, either wblock or create block. When inserting this block into another drawing we would get the attribute dialog box appear and complete the required information. Within AutoCAD 2012 we have made a block with attributes, when we insert this drawing into another drawing the block is inserted but no attribute dialog box. If I click on the block I see edit block definition dialog box with the drawing file name of the block and the block name. If I explode the block I then have my block and when clicking the block the attribute dialog box appears. It seems that in AutoCAD 2012 when we create the block and save the drawing and then insert the drawing it becomes a nested block type. Is there a setting I need to switch to prevent this and have the block insert and then click on it to change the attributes as required?
I am now having issues any time I try to insert a Block into any drawing - I get a Fatal Error.
I have uninstalled & reinstalled this afternoon but I am still having the same issue.
It happens when I am trying to insert blocks from both the Design Centre & also from Tool palettes.
Other users in my office do not have this problem, the only difference between my set-up & theirs is that I have installed the 'AEC Section Display & Tag Scale Hotfix' but I have tried uninstalling this but had the same results.
I am trying to insert blocks but in the command line it says invalid, if I copy & paste the block in it works fine but as soon as i try to use the insert command it will not work.
Probably useful to tell you that I have around 60 blocks each saved as a DWG file and all of them are saved in 1 folder so there is no other crap in there.
the thing that really baffles me though is the fact that after I have pasted the block in to the drawing, the insert command works for that block.
At the moment when I use our company tool palette and select a block when I insert it if I hit the CTRL key on my keyboard the insertion point jumps between all the points in my block be it stretch points, base points or basic points.
If I create my own palette and add my blocks to it, the CTRL function doesn't work when I select a block.
Can I make VBA macro (application) for inserting blocks? I need to insert blocks from list of blocks that I made. I want to use less time with that application on inserting blocks, then to use standard method Insert>Block... So I want to check the block from my list, to define attributes and to put the block automatically on drawing, and then to repeat all with another and another blocks. all to be put one close to other.
I had been trying to insert a title block (block) in to a drawing as part of changing the title block But in some drawings the block gets scaled off. Is there any system variable or any solution to maintain the drawing without getting scaled while inserting block.
I had used -dwg units and this appears to single drawings only. Any other way to do this to all the files in a folder.
