What's the setting to draw dimensions as objects? For some reason it's drawing them as seperate lines, text, etc. and they only show after hitting enter. I've had this problem in the past and i'm not sure what setting does this
View 2 Repliesautocad lt 2010 crashes when I hit the enter key.
example: typed UCS in command line then hit enter key and crashes.
I installed update 1 & 2. still crashes.
restarted computer,still crashes.
Any thoughts besides unistalling and reinstalling?
Just upgraded to PS CS6, and am having a problem manually entering a value for the magnification level in the status bar (same goes for Navigator panel).Is it supposed to automatically zoom to the amount entered without hitting enter/return? For example, if I want 25%, the box will read 2%5 and tells me my value is invalid by the time I hit return (the document will go to 2% automatically before I hit the 5). I can find nothing on this anywhere online, and the documentation mentions typing a number then having to press enter/return. Is this a feature? A glitch? Can it be disabled/fixed?
I am running a Mac and small Cintiq with an on-screen keyboard (so typing speed is slow and screen area at a premium), and the button on the pen (set to be an 'option' key) sticks on occasion.
This error message appears when I have the Direct Selection tool selected, but have not selected an object. Every time I press Enter I get the alert: "Could not complete your request because of a program error." It doesn't matter what file I have open.
I'm running Mac OS X 10.7.5, 2.2 GHz, 16 GB memory. This is just one of several weird bugs I've encountered in CC.
I'm using an HP Envy x2, which is a tablet-laptop hybrid with an attachable keyboard, and I'm having an issue with Adobe Photoshop Elements 11.
When I attempt to start a new line of text in a text layer by pressing "Enter," it doesn't let me start a new line of text; instead, it stops editing the text layer altogether. I would like to be able to press "Enter" and have PSE11 start a new line of text in the text layer; I have been using Elements to create graphics since 2007 and have never encountered this problem.
I have already tried:
- Uninstalling and re-installing PSE11
- Ctrl + Enter, Shift + Enter, Fn + Enter
- Resetting the type tool
- Making sure the spacing is set to Auto
- Turning on and off the Num Lock key via on-screen keyboard
I am using 2012 and i would like to enter my dimensions in imperial into a metric drawing with autocad doing an automatic conversion. So let's say i write this:
12'-8-1/2"
Autocad has to take it like that into the metric drawing then, he has to convert this to 3873.5 mm. Is there a code i can put into some autocad file to make this software work like that?
I cannot enter new dimensions in resizing window. Has been fine up until now, but I can't click in the spaces to change. Am operating Elememts 8
View 1 Replies View RelatedIs there any way to enter exact position coordinates ( x, y) and dimensions for objects in P'shop? For example, putting a photo in an exact position and sizing it by other than dragging handles with the mouse?
View 3 Replies View RelatedI have AutoCAD 2013 hitting the following registry location several hundred thousand times before closing a file:
HKLMSOFTWAREAutodeskAutoCADR19.0ACAD-B001:409LocaleID
Looking at a Procmon trace, there is a set of 3 entries: RegOpenKey,RegQueryValue,RegQueryValue and each is successful.
I just recently installed Inventor 2012 and I'm finding it extremely annoying assembling parts together. I recall in 2011 I could see the parts interact and how the constraints would effect assemblies as I change offsets, relstionships, etc. But now in 2012 I can't see any of that until I acutallly apply the constrain and if it's wrong I have to back and edit it over multiple times till I get what I want. Is there anyway to get a preview of what will happen before I click the apply buton?
View 2 Replies View RelatedFor selecting objects, I must have hit a buttom trying to figure something else out and now I can't select objects without touching them and clicking on them, I used to be able to pick whole sections.
View 6 Replies View RelatedI'm putting together a simple lisp routine to issue bound, purged drawings.
I have code that will do the binding & purging but need handling the saving.
This is my approach :
(1) ask the user to save the drawing using this line (command "_saveas" "" "~")
(2) run a subroutine that binds xrefs etc (this works ok)
(3) run the QSAVE command
Trouble is, if the user cancels or hits escape during the SAVEAS command the subroutine & QSAVE will still run, overwriting the current drawing. How do I handle this scenario? Or should my appoach be different?
Just loaded Inventor 2012 on a new computer. It seems to work OK, I can open and close files with no problem, but as soon as I try to shut Inventor down It lock up. The only way to shut it down in using task manager. After I try to shut it down the normal way Inventor continues to consume memory, (memory usage reported in the task manager continues to increase in size)!
Also once it is terminated in task manager and then restarted, the Inventor memory usage reported in the task manager continues to increase in size with no files loaded? Never leveling off. I have monitored it for several minutes after starting it and it continues to steadily increase in memory usage.
What is this used for? From reading, it seems as though if you use this command it is a way to turn on and shut off layers?
View 2 Replies View RelatedIm running MEP 2013 and I shut off all of my osnaps including 3dosnaps..But one stays on...Its the connectors on MEP objects...How do I shut off those snaps as well?
View 3 Replies View RelatedI'm using ACADE 2011 but I assume the interface is common. You know that big red A in the top left corner. The one you click to get the MRU list, the one you click twice to shut AutoCAD down? Is there a way to disable the shut down on 2nd click? I quite often click it once, wait for a couple of seconds with nothing happening so click it again only to watch AutoCAD disappear.
View 9 Replies View RelatedOn the top of my Autocad display there is a "communication center" icon. So there is a constant connection with internet.
How can i shut down this connection ?
We do draw a lot a we want to draw fast. And sometimes you hit the wall.But XDP9 has a flaw that I ddn't experienced before and that I'd like to check with users on this forum. But only those with a Pen like a Wacom or nTrig. So all users with a tablet with pressure sensitive setup are susceptible too.
Try to doodle a line with your pen by circling around fast and long. In my experience the lines go less smooth and eventually will evolve to straight lines (see attached screendump) Once you hit that level Xara tends to straighten every move you make with that pen.
I've hit this behaviour when I was doodling on a rather outclassed tablet with rather ancient hardware (a Portege m400 with only 2gb Ram and a Pentium T2600 (dual core). I can repeat this behaviour on a M700 with a core2duo and 4Gb albait it takes longer to hit the wall.
there is a little bit of a "Play Lag" or Pause just after hitting Play. Afterwards it works fine. is just the beginning. Even on a Very Fast Computer with all resolutions even on Pro Res LT.
Also when I press "L" more than once, everytime I press it there's the pause or lag before changing speed.
I am trying to model raindrops hitting water. How I can have simultaneous wave generators,rather that the central based tool in Gimp.I need to be able to adjust the parameters in the same way as the distortion tool allows...
View 14 Replies View RelatedIn LT can you have a Macro or Lisp routine (thinking a bespoke button) that saves or shuts down a drawing and upon such, changes the current layer to 0?
View 2 Replies View RelatedI am trying to fix holes on my mesh by selecting the whole mesh and hitting weld at .001, but its pulling the whole mesh in. I have tried increasing the scale of the mesh by 1000x and even 5000x but a weld of .001 is causing the exact same result. I thought increasing the mesh size was supposed to scale the weld distance as well but its not for some reason.
View 2 Replies View RelatedHow to shut off the rendering for the pavement & curb assemblies autodesk provides?Otherwise they turn into black blobs and use a lot of ink when they are plotted.
View 6 Replies View RelatedHow do I fix the issue of the shutting down? I had been printing and then it wouldn't let me. i have updated everything and still won't work. I have windows 7 and lightroom 3.6.
View 1 Replies View Relatedis there a system variable to shut off the layer state preview? I would prefer to use the drop down and select the desired layer state, the preview slows this process down.
C3D 2011, 2013 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
I was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies View RelatedI typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
Is there any way I can make exploded dimensions in an old drawing become live dimensions again.
View 3 Replies View Relatedis there a way to lock the dimensions to aligned dimensions...or a key i could hold while dimensioning that would do that..
i have to dimensions a drawing where theres a lot of aligned dimensions to put and to do it manualy each time takes forever...
Product Design Suite 2013
Also be sure to pick the 'aligned dimension' method and not the 'linear dimension'. I hope that works in Revit as it does in AutoCAD.
View 9 Replies View RelatedWhenever I open and use PS, then close it down, my Mac will not restart or shut down; it gets as far as that ‘wheel of death’ which keeps on turning, turning and turning, I presume forever. Force quitting PS permits closing down normally. I have uninstalled PS, reinstalled it to no avail. Thinking that my harddrive might be the problem, I ran it through TechTool Pro and that did not work. So I must have some file responsible for it. No other programs, Adobe or otherwise, cause this.
View 2 Replies View Related