Have 2 files open with same dimensions. I have a little number on the first file I would like to copy & paste to the second. I want it in the same exact position on the second file as it appears on the first.
I thought if you dragged the layer from the first file onto the second while holding shift key would do it, but it only places the number on the center of the page.
I have two png images with embedded alpha channel.
It is wall (pic1), and it is wall's shadow(pic2).
They positioned exactly as they should, but on different pics.
If I select all area with wall picture (pic1), and copy past it to shadow picture(pic2) - wall appears at different, then original, location.
So, basically, how can I copy/past wall into shadow picture, with the same position, as wall has on it own picture?
Selecting and copying is of course trivial with the marquee tool.
I have a single image; I wish to consider it as 5x5 and take, exactly, each of the 25 pieces separately. I cannot judge this perfectly by eye.
I have a two layer image:
layer 1. background
layer 2. A transparent vector layer with text
I have a second image, the same exact size and resolution as the first two layer image. I would like to paste layer 2 from the first image, into the same exact position on image 2. Every time I paste. it centers the text, whether it is just a ctrl-v, or a paste layer. I've even tried promoting the layer 2 in the first image then pasting as new layer into image two, with no luck. Everything I've done pastes layer 2 from image one, into the center of image 2.
I have PSP Photo X2
I'm batching my signature onto a bunch of photos at the bottom righthand corner. I put my preferences to percentage rather than pixels so I could try things for most sized-photos. My dilemma now goes like this:
I record, open my signature, copy & paste to the other image (works fine). The signature shows up in the middle of the other image and rather than moving it manually where it'll be different for vertical and horizontal photos, is it possible to align right and bottom or get specific with entering numbers such as 90% horizontal and 90% vertical placement?
Basically, when you copy & paste to a different open file, is there a way to specify exactly where it should go when you paste it, or do you have to manually move it?
I have a question, quite a tricky one. Is there any way how can I copy and paste position and size of two objects?
Â
Let's say I have a circle 2 x 2 cm and it's position is y 5cm x 5cm, I have a square of size 3 x 7 cm and it's position is y 0cm x 0cm.
Â
How do I copy and paste in a single command/step the circles position and size to square, so I can get square of 2 x 2 cm and it's position 5cm x 5cm?
Â
Something like copy + paste in place with a different logics. I hope You understand what I want.
Â
I'm doing it now manually, I'm copying size and position of one object to another [ctrl + c > ctrl + v] but it takes quiet a while,
how can I copy and paste position and size of two objects?
Â
Let's say I have a circle 2 x 2 cm and it's position is y 5cm x 5cm, I have a square of size 3 x 7 cm and it's position is y 0cm x 0cm.
Â
How do I copy and paste in a single command/step the circles position and size to square, so I can get square of 2 x 2 cm and it's position 5cm x 5cm?
Â
Something like copy + paste in place with a different logics. I hope You understand what I want.
Â
I'm doing it now manually, I'm copying size and position of one object to another [ctrl + c > ctrl + v] but it takes quiet a while,
Is there any way to enter exact position coordinates ( x, y) and dimensions for objects in P'shop? For example, putting a photo in an exact position and sizing it by other than dragging handles with the mouse?
View 3 Replies View RelatedIs there a way to change the selection position and size by entering the numbers exactly? I find it difficult to make pixel perfect movements and it is tiresome to use the keyboard arrows to do this.
When something is selected, the position and size appear in the bottom left corner. Perhaps clicking on this could bring up a window that would let the user enter exact values.
Okay, likely a stupid question - I have a map I created as a .psd with multiple layers. I would like to create a document with two copies of this map in it so I can print two maps on one sheet of paper (i'm trying to save paper).
How do I copy all layers over to this new document? Is there an easy way to make a new document with 2 instances of my map?
I have two layered PSD files the same pixel size.
How can I drag and drop or copy and paste one layer from one doc to another but keep its original location on the "art board"? (X and Y coordinates).
I am running Windows Vista Home Premium 64-bit. I am having trouble copying and pasting things. The issue is that after I copy something/Print Screen, it takes several pastes for Photoshop to finally realize the change. Basically, the first couple of times I paste, the thing that was previously copied gets pasted it. I don't know if it's making a difference but it switches the paste to the latest thing that was copied faster after I minimize and maximize back the program. It's extremely annoying especially because then I have to either undo each time/delete the layers. Plus, I do a lot of frame comparisons between different video sources and it's hard to tell whether the thing being pasted was changed or not.Â
View 1 Replies View RelatedHow do I do a simple copy of one pixel and paste it to another place (I have zoomed in a lot) or if I have't zoomed in that close, copy some area and paste it to another place?
View 4 Replies View Relatedwhen I copy and paste sometimes the paste is put exactly where I copy from and sometimes PSCS2 (not got CS3 yet) pastes where ever it likes?
View 8 Replies View Relatedhow I can simply copy and paste an area of an image back onto the same image?
On my previous graphics software it was simply a case of highlighting the required area, click 'copy' then click 'paste' and bingo! To copy and paste on Photoshop seems much more involved including a number of complicated steps.
When i copy or copy merged and paste into a new canvas or layer, i get like a small Gradient round the sides of the image, the Gradient goes white. I know its a Copy problem because if i paste the layer selection into MS Paint it still gets that gradient around the sides.
View 2 Replies View RelatedSo when you copy and then paste a selection, photoshop almost always pastes way far away from where I copied. Why does it do that and how can I make it stop?
I commonly need to be able to copy something and then paste in the exact same spot.
I am trying to copy and paste a paragraph and only get a single line and not the paragraph here are the steps I take:
Â
- Copy text
- select text tool
- drag text box
- paste text
Â
I get all the words but bunched in one line. I have tried selecting the text layer and selecting Convert to Paragraph and it does nothing. I am sure there is a single option or button I am missing. I can only type titles not a wrapping paragraph in the box
I am not able to copy and paste text from non-Adobe programs (like Keynote or Word) into Photoshop CS6. I get an error message reading "Could not complete the Paste Text command because the clipboard data is empty or invalid." I have tried shutting down Photoshop, shutting down other programs, re-starting my computer, adjusting my Preferences and asking Adobe by phone and chat. I am on a new iMac and have no third party plug-ins installed.
View 3 Replies View RelatedWhen copying a gradient filled shape from illustrator CS6 to Photoshop CS6 an outline "halo" appears in the Photoshop image although the shape has no outline to begin with. Is this a clipboard issue? Is it an anti-aliasing setting I can change? Apparently it isn't as noticeable when I drag the shape from illustrator to Photoshop as it is when using the copy/paste command. But in both situations there seem to be issues in the border when gradient filled shapes touch other shapes.
View 15 Replies View RelatedI'm sick en tired of copy pasting text and get another output of my font size. For example: I copy a text with a font sz of 16 px, that size become 15.98px.
Â
What's the problem with Photoshop CS6? I only have this problem since i've updated my software.
I'm using two different .psd files - on one, copy/paste (or Cmd+C, then Cmd+V) works perfectly after I have made a selection - it creates a new layer. On the other, this doesn't happen at all. I would attache the file but I don't think I can...
Â
In any case, they are both simple files for Photoshop beginners. The one started out the same as the other, but I went through some basic steps in my learning, and now I am unable to copy/paste in the second file.
I have had this problem many times with both CS6 and CS5. I'm not sure if this is a Photoshop question or a Windows OS 8 question but anyways it seems to only happen with Photoshop.
Â
I copy an image offline to edit in photoshop. After I'm finished I save it and delete the image layer from the workspace to get ready for the next image. I grab another image that I want to paste in the same photshop workspace. When I paste, it pastes the same image I copied first. It even does this when I restart Photoshop, so that's why I think it may have to do with Windows Clipboard.
Â
I'm also really interested in details about how 'Copy/Paste" and the "Clipboard" work with different programs so I can best understand how to utilize it with what seems to be a simple tool, yet I still find myslef with questions because I don't filly undertsnad it.
when using the pen tool say I create a shape with the lines and I want a symmetrical other side, there doesnt seem to be a way to copy the pen tool points and paste them, then join them, so what do people do? Does everyone just make it a selection, fill with colour then copy it?
View 2 Replies View RelatedIs there something were i could open two images and then... copy/cut and paste it to another image?
View 8 Replies View Relatedsize changing when I copy and paste a layer from one file to the next. I will use a hypothetical for an example but the concept and process has been confusing me on many projects.
•Ok I have a new document blank page 5’’x5’’.
•I would like to put a circle on there covering approximately 1/4.
•I open up another file 2.5’’x.2.5’’. Place my circle on there going almost all the way to the edges. (lets pretend the circle is detailed and I do not want to resize it again)
•I copy my circle, go over to the 5’’x5’’ image and paste. The pasted layer is always much larger then what it started. Not a 2.5’’ circle.
I know about smart images and how to resize without distortion. My problem always occurs when I copy and paste. Well not problem but operator error.
I have created an image on a document sized 14.5*10 cm. I am trying to copy the whole image to a new A4 document and it looks tiny or very fuzzy (if resized). Why is the image tiny when the document size is not that much different?
View 1 Replies View RelatedI seem to recall that there is a method to copy and paste a line or paragraph of text from Word or Word Pad into Photoshop and then be able to work with it with the Type Tool.
View 2 Replies View RelatedI am working with a PSD. I am trying to copy a rounded button from the PSD and pasting it on a new image so I can use for a website. The image needs a transparent background. So I delete all the background layers (so it's transparent) from the PSD and copy the button. I then paste the button on a new image with a transparent background. Everything is good up until this point. However, when I go to save the new image it blurs the rounded edges from the button. This makes the button look bad on the webpage.
View 8 Replies View RelatedSo when you copy and then paste a selection, photoshop almost always pastes way far away from where I copied. Why does it do that and how can I make it stop? I commonly need to be able to copy something and then paste in the exact same spot.
View 4 Replies View RelatedI've just installed Elements 2 after using Elements 1 for ages and have been used to the copy and paste icon in the top bar, but in 2 they're not there.
Is there a way to do this, rather than use the Edit pulldown?