I have created an image on a document sized 14.5*10 cm. I am trying to copy the whole image to a new A4 document and it looks tiny or very fuzzy (if resized). Why is the image tiny when the document size is not that much different?
View 1 RepliesI want to copy one image and paste it into a selection (masked) of another image. I have the option to paste into which works but would like to be able to paste in Place as I believe this makes it a smart object and references the original file.
View 5 Replies View RelatedI do a 8.5 x 11 reso around 75 or up to 150. I lasso out something and paste it to my doc and sometimes it is tiny. Is that because my reso is to high?
View 1 Replies View RelatedI use illustrator most of the time. I'm designing a brochure and I've always embedded images, but now I'm trying to it correctly by linking them instead. So I have an image in ps as a tiff. I created a drop shadow for the image in illustrator.
I want to copy and paste it behind the image into the same file so both are one file linked to the brochure. Also the drop shadow pastes as too small, then i also can't get it positioned right etc.
I'm trying to write a script to batch process a number of files. I want the script to open file a*.png, convert black color to alpha and paste image b*.png on top of a*.png (both are the same size). The script converts black to alpha, but it doesn't paste image.
(define (batch-alpha-paste pattern pattern2);get the file lists (let* ((filelist (cadr (file-glob pattern 1)))(filelist2 (cadr (file-glob pattern2 1)))) (while (not (null? filelist))(let* ((file-name (car filelist))(filename2 (car filelist2)) (image2 (car (gimp-file-load RUN-NONINTERACTIVE filename2 filename2))) (draw2 (car (gimp-image-get-active-layer image 2)))(image (car (gimp-file-load RUN-NONINTERACTIVE filename filename)))(drawable (car (gimp-image-get-active-layer image)))) ; convert black to alpha(plug-in-colortoalpha RUN-NONINTERACTIVE image drawable '(0 0 0))
[code]....
I call the script from shell:gimp -i -b '(batch-alpha-paste "aa*.png" "bb*.png")' -b '(gimp-quit 0)'
how to copy image 2 into image ?
when I select, copy and paste the image it still has the content that I removed using the layer mask.
Â
I want to paste it over another psd whilst maintaing the transparency.
Â
PSD is at [URL]
I want a plugin for Paint.NET and i will show what i want to say in some pictures.For this exemple i will have :
A. a transparent image (800x600)
B. a red ball image (32x32)
 Â
1. I have the A image. Â
2. I copyed and pasted the ball image B on the A image.
3. Now what plugin i want to make is to expand the ball B selection on the all A screen/canvas. Â
4. Now the ball image B will be expanded on the all screen of A.
I have one image that has a specific texture I want to reuse for my own custom image, but I'm not sure how to use it in the paint brush while working on the other one. Can I do it the way I described?
View 2 Replies View RelatedSo I am trying to work with a web page template in dreamweaver. I am attempting to open the background image in this template with gimp, then paste over top of the Original image with a new image. Every time I paste the new image in it takes the color style of the original.
I.E. The original image is in shades of brown while the new image is in many different colors. Whenever I paste the new image (the image with many colors) it changes to shades of brown like the original image.
The same thing happens if I open the new image as a new layer or just simply copy and paste the new image in.
How do I bring the new image in without it changing colors?
For our field layouts we simply copy and paste image from google earth then scale them (using CTRL + C and CTRL + V).For some reason now, my image that was already pasted into a drawing now only shows the border of the image, not the image itself. Same story with any new images I try to paste in. How to fix this back so I can view my images?
View 6 Replies View RelatedI'm trying to take some writing from one image and paste it onto another photo.
View 1 Replies View RelatedIs it possible to copy and paste part of an image in one photo to another in LR4? I have a pc.
View 1 Replies View RelatedI'm very new to this photo editing. Never used photo shop. Only slightly understand what a layer is and don't really know how they work.
Basically I want to take one image of a person looking at a computer screen and then on the computer screen I want to paste another image so it looks as though they're looking at the image.I have both images but how to cut, copy, paste and resize so that the image fits the screen.
I am having problems copying/pasting an image into Gimp. Instead of the image itself being pasted, it pastes the mac symbol for Jpeg (the photo of the little Asian boy by the sea with the camera lens on top). The same happens pasting an EPS file. I don't understand as I have managed to paste an image before. I have tried pasting into selection/pasting as new image/pasting as new layer. All the same. Neither will Gimp let me drag an image into it from finder or the desktop. I've tried opening a new file from scratch too. Same problem.
I'm using a macbook pro. OX 10.6.8
I have two layered PSD files the same pixel size.
How can I drag and drop or copy and paste one layer from one doc to another but keep its original location on the "art board"? (X and Y coordinates).
I am running Windows Vista Home Premium 64-bit. I am having trouble copying and pasting things. The issue is that after I copy something/Print Screen, it takes several pastes for Photoshop to finally realize the change. Basically, the first couple of times I paste, the thing that was previously copied gets pasted it. I don't know if it's making a difference but it switches the paste to the latest thing that was copied faster after I minimize and maximize back the program. It's extremely annoying especially because then I have to either undo each time/delete the layers. Plus, I do a lot of frame comparisons between different video sources and it's hard to tell whether the thing being pasted was changed or not.Â
View 1 Replies View RelatedHow do I do a simple copy of one pixel and paste it to another place (I have zoomed in a lot) or if I have't zoomed in that close, copy some area and paste it to another place?
View 4 Replies View Relatedwhen I copy and paste sometimes the paste is put exactly where I copy from and sometimes PSCS2 (not got CS3 yet) pastes where ever it likes?
View 8 Replies View Relatedhow I can simply copy and paste an area of an image back onto the same image?
On my previous graphics software it was simply a case of highlighting the required area, click 'copy' then click 'paste' and bingo! To copy and paste on Photoshop seems much more involved including a number of complicated steps.
When i copy or copy merged and paste into a new canvas or layer, i get like a small Gradient round the sides of the image, the Gradient goes white. I know its a Copy problem because if i paste the layer selection into MS Paint it still gets that gradient around the sides.
View 2 Replies View RelatedSo when you copy and then paste a selection, photoshop almost always pastes way far away from where I copied. Why does it do that and how can I make it stop?
I commonly need to be able to copy something and then paste in the exact same spot.
I am trying to copy and paste a paragraph and only get a single line and not the paragraph here are the steps I take:
Â
- Copy text
- select text tool
- drag text box
- paste text
Â
I get all the words but bunched in one line. I have tried selecting the text layer and selecting Convert to Paragraph and it does nothing. I am sure there is a single option or button I am missing. I can only type titles not a wrapping paragraph in the box
I am not able to copy and paste text from non-Adobe programs (like Keynote or Word) into Photoshop CS6. I get an error message reading "Could not complete the Paste Text command because the clipboard data is empty or invalid." I have tried shutting down Photoshop, shutting down other programs, re-starting my computer, adjusting my Preferences and asking Adobe by phone and chat. I am on a new iMac and have no third party plug-ins installed.
View 3 Replies View RelatedWhen copying a gradient filled shape from illustrator CS6 to Photoshop CS6 an outline "halo" appears in the Photoshop image although the shape has no outline to begin with. Is this a clipboard issue? Is it an anti-aliasing setting I can change? Apparently it isn't as noticeable when I drag the shape from illustrator to Photoshop as it is when using the copy/paste command. But in both situations there seem to be issues in the border when gradient filled shapes touch other shapes.
View 15 Replies View RelatedI'm sick en tired of copy pasting text and get another output of my font size. For example: I copy a text with a font sz of 16 px, that size become 15.98px.
Â
What's the problem with Photoshop CS6? I only have this problem since i've updated my software.
I'm using two different .psd files - on one, copy/paste (or Cmd+C, then Cmd+V) works perfectly after I have made a selection - it creates a new layer. On the other, this doesn't happen at all. I would attache the file but I don't think I can...
Â
In any case, they are both simple files for Photoshop beginners. The one started out the same as the other, but I went through some basic steps in my learning, and now I am unable to copy/paste in the second file.
I have had this problem many times with both CS6 and CS5. I'm not sure if this is a Photoshop question or a Windows OS 8 question but anyways it seems to only happen with Photoshop.
Â
I copy an image offline to edit in photoshop. After I'm finished I save it and delete the image layer from the workspace to get ready for the next image. I grab another image that I want to paste in the same photshop workspace. When I paste, it pastes the same image I copied first. It even does this when I restart Photoshop, so that's why I think it may have to do with Windows Clipboard.
Â
I'm also really interested in details about how 'Copy/Paste" and the "Clipboard" work with different programs so I can best understand how to utilize it with what seems to be a simple tool, yet I still find myslef with questions because I don't filly undertsnad it.
when using the pen tool say I create a shape with the lines and I want a symmetrical other side, there doesnt seem to be a way to copy the pen tool points and paste them, then join them, so what do people do? Does everyone just make it a selection, fill with colour then copy it?
View 2 Replies View RelatedIs there something were i could open two images and then... copy/cut and paste it to another image?
View 8 Replies View Relatedsize changing when I copy and paste a layer from one file to the next. I will use a hypothetical for an example but the concept and process has been confusing me on many projects.
•Ok I have a new document blank page 5’’x5’’.
•I would like to put a circle on there covering approximately 1/4.
•I open up another file 2.5’’x.2.5’’. Place my circle on there going almost all the way to the edges. (lets pretend the circle is detailed and I do not want to resize it again)
•I copy my circle, go over to the 5’’x5’’ image and paste. The pasted layer is always much larger then what it started. Not a 2.5’’ circle.
I know about smart images and how to resize without distortion. My problem always occurs when I copy and paste. Well not problem but operator error.
I seem to recall that there is a method to copy and paste a line or paragraph of text from Word or Word Pad into Photoshop and then be able to work with it with the Type Tool.
View 2 Replies View Related