In the regional settings of my computer I show negative numbers in brackets instead of the minus sign in front of the number.
With these settings, I am unable to enter negative coordinates in my Corel draw. Corel changes them automatically into positive one.
I have to go to control panel - regional settings and set the negative format back to minus, before I am able to enter negative coordinates in Corel.
Being in the Heat Transfer business, there is a new paper out that rids the paper print called "Image Clip", it has a procedure that to make it work. Printing a mirrored image on transfer paper and printing another image with laser but a "NEGATIVE". I have suite X4, any quick ways to make the image using my Corel, their instructions is only in Photoshop, I prefer Corel?
View 6 Replies View RelatedOS: MS Windows7 Ultimate x64, v6.1.7601 SP1 build 7601
PC Config.: Intel Core2Quad CPU Q6600 @ 2.4GHz, DG33FB, 8GB RAM
CDGS x6 (64 bit) v16.0.0.707
1. Facing problem of frequent CorelDraw X6 crash while working and seemingly most of the times it even don't sent any error messages to Corel support.
2. Transformations docker doesn't accept enter for applying changes, it only responds when we hit apply. It is good to move through options by using TAB, but it should accept ENTER as “APPLY” as we make desired change in any parameter. Mostly I prefer dockers to property bar.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key.
4. Using pick tool double click a group of objects including paragraph text and get desired rotation is still a havoc despite we are using x6 (64-bit). It kills much of our time. See screen shot below:
5. I am also facing problem in EPS editable import as shown in the screen shot below "An error occurred while processing PIEE.eps. The file cannot be opened."
The file is created in x6 and has 2 pages for two print jobs. Both pages has flatten background text and fountain lenses to RGB bitmap. All texts converted to curves. Page 1 exported to EPS and then imported as EPS editable successfully. Page 2 exported to EPS and then imported as EPS editable - shown above error. I have also tried importing this page to a fresh file and then created fresh EPS but got the same erroneous result.
As far as my experience with PDF is not good, because sometimes PDF also produces undesired result on RIP specially as RGB images, bar codes, drop shadows etc. I believe that EPS files are far more reliable in prepress jobs.
I have been using Corel for over 20 years, and have never needed support. I do most of my work editing nodes within a drawing for creating continuous line patterns that are repeatable.
For years I have simple "nudged" the first and last point of a complex curve to the appropriate position. Now I want to simplify that by entering in the coordinates for the node.
I have tried Object Coordinates, but it appears to do nothing after I change the node location, or radically change my design. There is no documentation for it. I have searched Customize for some sort of input field to add to the toolbar with no luck.
I always have to add the information on the coordinates of the selected note to the Status Bar, so I am surprised that I can't find an option for editing the position.
I have Corel DRAW Home & Student Suite X5. It appears not to include the Docker "Object Coordinates" although both the video and Help files include prescriptions for using it.Corel Support insist that this docker is present in this edition of X5 and instruct me to reset the application defaults (F8).F8 does not reveal the missing docker, nor does a complete uninstall/reinstall. It seems to me that "Object Coordinates actually is NOT there.
View 4 Replies View RelatedWhen using "pixel units" the position and sizes are reported rounded to the nearest pixel.
The two squares below are both reported as 2 pixels square. One is actually 1.5 pixels square:
can the pixel coordinates and sizes not be rounded?
My project: I want to create a drawing based on a photo. The usual way is to place the picture on the working space in Draw and fix it there.Then draw all parts I want to have in my copy.Problem: I can't always really see what I am drawing.
Now my question:Is there a possibiltiy to "calk" a drawing to different coordinates than above the picture itself?For example: The photo is on the left, I "draw" above the picture and the drawing action, e.g. the stroke, happens right from the photo. The y-coordinates of the copy could stay the same while the x-coordinates are x plus a certain value.
How do I import a list of x,y coordinates to produce a complex curve in CorelDraw x4?
View 1 Replies View RelatedI'm thinking that once the perspective tool is enable the starting/ending coordinates of the fountain fill should lock relative to the shape. What ya think?
As a work around you can position the to be perspective guide shape so the starting/ending coordinates of the fountain fill at least fall close?
cs_setInnerHtml('video_5c40a7a1-4b00-4e4c-aca5-47f306588bdd','');
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies View RelatedI have followed the instructions carefully and am unable to fill anything.
I make a rectangle. Choose the colour from the palette, drag the little coloured box over to the rectangle and release. Nothing. Many years ago I used my brothers Corel draw, so I know ( or knew then ) how to colour a rectangle.
I'm not able to assign a Hotkey to enable me to use Corel Capture. No matter what I use, it tells me that the Hotkey is already being used by this system. I have deleted Hotkeys and then then tried to reassign them to no avail.
View 14 Replies View RelatedWhen I export from Corel Draw as a jpg, then put the image online, on IE it shows as a red x.
View 5 Replies View RelatedUsing CorelDraw X6 on Windows 8 x64, and a Kensington Expert Mouse (that's a type of trackball).
For some reason, I can't use the wheel to zoom in or out. Just doesn't work. The drivers are installed, and the wheel works fine in all other applications, but absolutely refuses to cooperate in CorelDraw X6.2 (had this issue since CorelDraw 6).
I have Corel Draw 12 on one computer and Corel 5 on my lap top - After following the simple video instructions to place a background image ( imported photo - jpg or tiff) into a set text the message box ...The object you selected is invalid - do you wish to try again pops up.
View 1 Replies View RelatedI am a long time user of Corel products (well, since Corel 4). I have been running Corel 12 for several years, as financially, as a pensioner it is not viable to keep up grading and 12 has been perfectly adequate. I am on Windows 7 Home premium, and I know that 12 was not designed for that platform, however it has been operation satisfactorily since 7 came out. Today, It has crashed, and I am unable to open photopaint at all either from the shortcut or the program list.
(Corel Draw, which is the only other part of the suite I use) appears to open and be available. I tried to repair with the original disk to no avail, so that having failed I did an uninstall, cleared the caches the temporary files and did a clean install. Corel Draw is still working, but Paint will not open at all. The logo appears then totally disappears after a few seconds leaving the desktop clear. There has been no changes to the computer recently and until last night the program was working fine.
I am using Windows Vista 32 bit OS.
I have used the X6 graphics suite for some time now and have always installed updates when notified. A couple of days ago I was notified of the latest update which I duly installed.
Thereafter I was unable to open Coreldraw. I was unable to resolve the issue by reverting to a previous versions from as few days previous. I have done this by using the usual windows uninstall facility.
However, when I try to reinstall the X6 suite from the CD I get an error message that says "A newer version of this program is installed. Delete this first before you install this version" (or words to that effect).
Clearly there is something that indicates a later version is installed but I cant find out why I am getting this message. I have endeavoured to delete everything I find associated with X6 but after rebooting I still can't reinstall the software.
I am trying to import a pdf file ford connect van template into CorelDraw x5 but am having no joy.
View 2 Replies View RelatedI can not see the preview of the clip arts when I need to choose one to insert it.
View 14 Replies View RelatedAfter successfully using Corel Draw for some years, I am suddenly unable to print files. Instead of the file, my printers just print a black page. I have tried re-installing but it has not worked.
View 1 Replies View RelatedWhen I am printing my design, the black is not printing. Have tried on two printers, neither are faulty. Wondered if I accidentally have it on a setting that doesn't allow it to print black.
View 3 Replies View RelatedI have one logo designed in Corel draw X5 and sent the file to the printer company ,they have corel draw12 on their PC and they are not able to open the design as it come as a blank page in corel draw12 .. how to open the same in corel draw 12..
View 3 Replies View RelatedI have a problem with printing in X5. All the documents I've worked in X4when I print the X5 have a problem with the colors, they are not the same with X4.
Printing with: HP inkjet 110 A0Riso RZ370, RZ590 A3Epson inkjet 1400 A3Canon laser LBP5200 A4HP laser 1010 A4
Having trouble opening an svg file in X6. Crashes both X5 and X6.
File available here : [URL] ....
Whenever i save a file, and then try to open it later on, it wont open. Nothing happens (just like I haven't clicked anything). It does this is I double click the file or I do File >Open. However if i save the file as 'Version 13' it opens fine. I decided to re-install Corel Draw (a number of times), but the problem is still there!
View 15 Replies View RelatedI am not a power user but have used CorelDraw since ver 8. My question is why I cannot fill shapes like the one provided whether I create them in Draw, or import them as dwg or dxf into Draw. It's interesting that I can fill this shape in DesignCad (the source of the dwg-dxf files) but not in Corel. Of course, the project I'm working on needs the other touches that Draw provides and DesignCad doesn't.
View 14 Replies View RelatedI'm having trouble making fonts using X4. I've found the export "ttf" filter, and the dialog opens for my first letter, which allows me to assign the ASCII position, and that works out fine. A TTF file is created, with that letter shown. However, when I try to export the next object for the next letter, instead of simply opening the assigning dialog for the next object, so as to add to the file, it goes to the dialog asking me to name the file, and when I do, Corel crashes.
View 14 Replies View RelatedWhile using print merge option Corel Draw X5 give me an error when I try to import an existing csv or txt file on the print merge dialog box. It says "Impossible to open the file or not correct file format". The files are made with open office or microsoft works, and in the past I've already used and worked good. Now I find this error...
View 4 Replies View RelatedError Message.jpg
Please find the attached "Error Message.jpg" file.I am getting that Error Message while trying to Uninstall "CorelDRAW Graphics Suite X6" on a Windows XP Desktop Computer. This Computer belongs to other person. I am getting the same Error Message upon trying to Re-Install CorelDRAW Graphics Suite X6.How do I successfully Uninstall and Re-Install?
I'm trying to graduate a circle precisely . An example such as a draftsman's compass or a clock face. I create a circle then I make a vertical line which then I copy , space them apart and create a blend between them. I then choose (new path) and select the circle, then (blend along full path) and finally (rotate all objects).
At a quick glance it looks proper but as in the case of a clock face (a graduation every 30 degrees) some of the lines are not precisely radiating from the center of the circle I'm using as the path. In the near future I plan on drawing" to scale' a certain number of meshing gears and this will cause problems.
issue with selecting and then moving an object in Photo Paint? I can hover and get the object name, and then select but when I go to move the object PPT selects and moves an entirely different object. I have held down Ctrl, Alt etc. to no avail. Bigger objects are easier since there is more to grab on to but smaller objects are a pain.
View 1 Replies View Related