I have been using the multiline text quite successfully. When i was playing with inserting tables, i rotated my text in the tables.
Now when i use my multiline test on my plans they also automatically are set up vertically and not horizontally anymore.
Where can i rectify this. On the properties the rotation angle is set at 0 degrees.
I've recently noticed that my multiline text boxes in old drawings have been splitting themselves into multiple multiline text boxes. They aren't exploding into single line text because it won't let me use the convert command to turn them into multiline because they are already multiline.
I know the dimassoc command can be set to a certain value to cause all dimensions to explode but is there some kind of command that could have change itself and is causing this problem?
I use AutoCAD 2008 LT. I have a problem when trying to use multiline text. The text box will only allow me to write vertically, but when the text is completed, by left clicking on a grip and changing the rotation angle to 0 degrees, it reads horizontally. However, if I try to amend it, vertical text is the result. I do not have this problem with single line text. Whilst it is possible to read vertically, it is time wasting.
View 9 Replies View RelatedI have a situation where I'm adding some text and want to identify the part with a part#. For example Item 1, I want to add a circle to the number one for it to stand out on my text notes.
The same goes for each line item I have for my text note. For example, if I have 5 lines of text notes, I want to be able to put for example a triangle around 1 thru 5 line items.
1.
2.
3.
4.
5.
I've attached screen shot to see what I'm looking to do. By the way used multiline text for my drawing notes.
how to create the end of a multiline text, soft or hard return or control enter
View 1 Replies View RelatedI used to have a lisp routine for selecting multiple strings of single line text and converting them to a single multiline text box. I think there was even an express tool in previous versions of CAD to do this. I am in 2011 now, and I can not find a command for this. I would even settle for simply changing single line to multiline without adding multiple strings.
View 8 Replies View Relatedis there a shortcut/keystroke to quickly access the multiline text command?
View 1 Replies View RelatedWhen you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies View RelatedThis has been happening intermittently but now seems to be permanent. When I slect the Multiline tool, click to place the text box, then click to place the other corner the box ignores the size I set and snaps to as wide as the screen and one line high. It does this in several different drawings so it is not native to one. If I enter text and deselect I can adjust the handles and alter the text.
I have attached a screen shot to show. It doesn't matter how close or far I am zoomed in on the drawing.
For what it's worth I do not like the way the ribbon panel controls handle text, it usually takes multiple tries to get it to change the text height. I usually resort to using the Properties flyout but that adds mutltple steps to the process.
How to combine more than multiline text in one?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am using a multiple line attribute. I insert the block, fill in the text, and adjust the width of the multi-lines text so the lines are longer and there are fewer of them. I save and close the file, then re-open some time later and the width of the multli-ine attribute has reverted back to a different width (shoter) - I am assuming it is the default width that I set to the attribute. Is there a setting to stop this from happening? Is there something I should do when I create the attirbute?
View 2 Replies View RelatedRunning PSE 9 under Mac Snow Leopard.
I have a family photo including many text layers. I'm trying to edit the text in a selected large multi-line text layer. I'm following the steps from the appropriate PSE article, but I always end up creating a new layer and the red/green no-go/go option. I thought I should just be able to double-click the text layer and start editing.
After installing the 2013LT application the Multiline Text Function worked fine, however, now it will not function at all. "Cannot find Shell Program"--is what displays at the Command Line when attempting to create a text box in a file.
View 2 Replies View RelatedUnderlining the “single text” and “multiline text”
To underline the “single text”, we use the %%U but this sounds not to work with the “multiline text”!
What I should use to underline the “multiline text”?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am trying to create an attribute with multi-text and I am unable to get the text to wrap. I have the boundary width option checked and specified, but the text doesnt seem to care and keeps right on going....
View 4 Replies View Relatedi'd like to turn single texts into a multiline tex and KEEPING THEIR INDIVIDUAL COLOURS & TEXT SIZES.
View 4 Replies View RelatedAttached is a block that I use a lot. Originally I had two separate single line text attributes for the "title". I modified it to have a single multiline text attribute instead. I want this attributes text box width to stretch along with the line below it, so that long text strings will automatically adjust to single or multiple lines as necessary and not run off the end of the line. As it stands now I have to stretch the line and then adjust the width of the text box to match.
Also it would be nice if the bulk of the text would stay on the bottom line and only the "overflow" would move up to the next line.
Within the enhanced attribute editor dialogue, I am wondering if there is a way to open up the multiline text editor with a keyboard shortcut, vs.. having to mouse click on the open editor box? The reason being, I can quickly fill out attributes that are single line text, but get hemmed up with having to stop and open up the multiline....
View 3 Replies View RelatedI use Autcad Architecure 2010 on my computer.
After I created or made a multiline text, the ribbon in autocad is getting all blurry. None of the icons in the ribbon will work (see attached picture).
I always have to shut down Autocad and restart it to continue my work.
Problem: Create a dynamic block with visibility, use a Multiline Attributes for text entry in to the block. I create multiple lines of text when editing the block in model space. Either with gripping the txt window width or use "Enter" to define multiple lines.... I proceed to edit the block slightly and when I close and save changes......All ML Attributes default to single line text. In turn i have to re-edit all my text.
Bugs like this are extremely painful. No rhyme or reason to them... Looking for a workaround other than using separate attributes for each line of text.
is there any possibility in GIMP to align a text not vertically at the bottom of a text box (there are options for left, right, center and fill but that's only the horizontal alignment). The motivation is, that I change a text in an image quite often and it whould "align itself" if it whould always be aligned at the bottom of the textbox.
View 3 Replies View RelatedI am trying to align text in a row of my parts list vertically, but I can't seem to find an option to accomplish this. Please see the row for item #5 in the attached jpeg. The default behavior seems to be top justification.
I have found the ability to change left/center/right horizontal alignment in the 'format column' dialogue, but nothing for the vertical alignment. I have also tried changing the settings within the 'styles editor' by going to the parts list style I am using, then the text style that is specified for the data, and changing the justification for that text style to middle justification (see 2nd attachment), but it does not seem to effect the text within my parts list as I had desired.
I have a block that I want to show on a vertical exaggeration of 10x. How do I make it so that a block has a Y scale of 10 without the attribute text inside the block being stretched in the Y direction 10x?
I would like to use a Y scale of 10 rather than a block with 10x the length because I have a field that returns a length parameter and I don't want that value to be 10x what it's supposed to be, and it would make things much easier to not have to multiply my values by 10x each time I use the block.
When you open a text box how do you center the text in the middle from top to bottom(vertically), not left to right. The text starts immediately in the top left corner. I need it in the center of a predefined text box size, so that if you drew a line across the center of the box from left to right, the top half of the letters would be above the line and the bottom half would be below the center line. In other words there should be the same distance above the words to the top edge of the text box, as to the bottom of the text box, from the center.
View 5 Replies View RelatedI am creating a banner for a website. The banner is say 400 pixels wide by 60 pixels high. I drag the horizontal type tool so that it covers the entire rectangular shape exactly. I can center the text horizontally by selecting Window-->Paragraph and then selecting the center button. However I can't seem to center the text vertically in the banner using some Photoshop option. Once the text is typed then I can move it to what I think is vertically centered but it may not be exact.
The reason I am looking for exactness is I have to create several banners that are the same dimension but the text within will be different. Some of the banners will be one line and others will be two lines. I would prefer to vertically center them exactly.
I select the text tool then drag it to make a box. I type text into, but it always go to the top. Is there way to make all of the text inside that box automatically center vertically?
View 9 Replies View RelatedPhotoshop text is being stretched vertically. My text settings are at 100%.
View 1 Replies View RelatedI'm trying to do, but it's horizontal. I need to do it vertically with the letters on top of each other, not with the letters turned sideways, as in the "vertical text tool"
View 3 Replies View RelatedI have tried tooth and nail to use the Path tool and every tutorial explains it so simply but nothing will work. I cannot text to path.It should be so simple but it is not. I make a vertical path then select the text tool and type my text. Then hit text to path and nothing happens.Rotation doesn't give me the same quality in the final result so that's out.
View 8 Replies View Relatedhow can I insert text vertically in my photo.
View 3 Replies View RelatedI have 4 lines of text. They are currently in 4 separate layers as they are 4 separate buttons. How do I make sure the verticle space between them is even?
View 1 Replies View Related