AutoCad :: Create The End Of Multiline Text?
Feb 15, 2013how to create the end of a multiline text, soft or hard return or control enter
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Multiline Text Being Converted Into Separate Multiline Texts
Jan 9, 2013I've recently noticed that my multiline text boxes in old drawings have been splitting themselves into multiple multiline text boxes. They aren't exploding into single line text because it won't let me use the convert command to turn them into multiline because they are already multiline.
I know the dimassoc command can be set to a certain value to cause all dimensions to explode but is there some kind of command that could have change itself and is causing this problem?
AutoCAD .NET :: How To Create Multiline Attribute
Sep 16, 2013My method creates a attribute, how to a create a multi-line attribute?
using (Transaction trAdding = dbCurrent.TransactionManager.StartTransaction())
{
BlockTable btTable = (BlockTable)trAdding.GetObject(dbCurrent.BlockTableId, OpenMode.ForRead);
string strBlockName = "ATTRBLK" + System.Convert.ToString(blockName);
try
{
if (btTable.Has(strBlockName))
[Code]....
AutoCad :: How To Use Multiline Text
Feb 11, 2011I use AutoCAD 2008 LT. I have a problem when trying to use multiline text. The text box will only allow me to write vertically, but when the text is completed, by left clicking on a grip and changing the rotation angle to 0 degrees, it reads horizontally. However, if I try to amend it, vertical text is the result. I do not have this problem with single line text. Whilst it is possible to read vertically, it is time wasting.
View 9 Replies View RelatedAutoCad :: Edit Multiline Text
Mar 22, 2013I have a situation where I'm adding some text and want to identify the part with a part#. For example Item 1, I want to add a circle to the number one for it to stand out on my text notes.
The same goes for each line item I have for my text note. For example, if I have 5 lines of text notes, I want to be able to put for example a triangle around 1 thru 5 line items.
1.
2.
3.
4.
5.
I've attached screen shot to see what I'm looking to do. By the way used multiline text for my drawing notes.
AutoCad :: Changing Text To Multiline
Feb 13, 2012I used to have a lisp routine for selecting multiple strings of single line text and converting them to a single multiline text box. I think there was even an express tool in previous versions of CAD to do this. I am in 2011 now, and I can not find a command for this. I would even settle for simply changing single line to multiline without adding multiple strings.
View 8 Replies View RelatedAutoCad :: Multiline Text Shortcut?
Jul 25, 2012is there a shortcut/keystroke to quickly access the multiline text command?
View 1 Replies View RelatedAutoCAD LT :: Can't Control Size Of Multiline Text Box
May 15, 2013This has been happening intermittently but now seems to be permanent. When I slect the Multiline tool, click to place the text box, then click to place the other corner the box ignores the size I set and snaps to as wide as the screen and one line high. It does this in several different drawings so it is not native to one. If I enter text and deselect I can adjust the handles and alter the text.
I have attached a screen shot to show. It doesn't matter how close or far I am zoomed in on the drawing.
For what it's worth I do not like the way the ribbon panel controls handle text, it usually takes multiple tries to get it to change the text height. I usually resort to using the Properties flyout but that adds mutltple steps to the process.
AutoCAD 2013 :: How To Combine More Than Multiline Text In One
Sep 26, 2012How to combine more than multiline text in one?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD LT :: Multiline Text Attribute Width?
Jan 30, 2012I am using a multiple line attribute. I insert the block, fill in the text, and adjust the width of the multi-lines text so the lines are longer and there are fewer of them. I save and close the file, then re-open some time later and the width of the multli-ine attribute has reverted back to a different width (shoter) - I am assuming it is the default width that I set to the attribute. Is there a setting to stop this from happening? Is there something I should do when I create the attirbute?
View 2 Replies View RelatedPhotoshop Elements :: How To Edit Text In Selected Large Multiline Text Layer
Jul 16, 2013Running PSE 9 under Mac Snow Leopard.
I have a family photo including many text layers. I'm trying to edit the text in a selected large multi-line text layer. I'm following the steps from the appropriate PSE article, but I always end up creating a new layer and the red/green no-go/go option. I thought I should just be able to double-click the text layer and start editing.
AutoCAD LT :: Multiline Text Says It Cannot Find Shell Program
Sep 11, 2013After installing the 2013LT application the Multiline Text Function worked fine, however, now it will not function at all. "Cannot find Shell Program"--is what displays at the Command Line when attempting to create a text box in a file.
View 2 Replies View RelatedAutoCAD 2010 :: Underlining Single And Multiline Text?
Mar 14, 2012Underlining the “single text” and “multiline text”
To underline the “single text”, we use the %%U but this sounds not to work with the “multiline text”!
What I should use to underline the “multiline text”?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Multiline Boundary Not Wrapping Text?
Feb 12, 2013I am trying to create an attribute with multi-text and I am unable to get the text to wrap. I have the boundary width option checked and specified, but the text doesnt seem to care and keeps right on going....
View 4 Replies View RelatedAutoCAD 2010 :: Single Texts Into A Multiline Text
Apr 20, 2013i'd like to turn single texts into a multiline tex and KEEPING THEIR INDIVIDUAL COLOURS & TEXT SIZES.
View 4 Replies View RelatedAutoCad :: Multiline Text On Plan - Automatically Set Up Vertically
Mar 12, 2012I have been using the multiline text quite successfully. When i was playing with inserting tables, i rotated my text in the tables.
Now when i use my multiline test on my plans they also automatically are set up vertically and not horizontally anymore.
Where can i rectify this. On the properties the rotation angle is set at 0 degrees.
AutoCAD Dynamic Blocks :: Stretching Multiline Attribute Text Box
Aug 24, 2011Attached is a block that I use a lot. Originally I had two separate single line text attributes for the "title". I modified it to have a single multiline text attribute instead. I want this attributes text box width to stretch along with the line below it, so that long text strings will automatically adjust to single or multiple lines as necessary and not run off the end of the line. As it stands now I have to stretch the line and then adjust the width of the text box to match.
Also it would be nice if the bulk of the text would stay on the bottom line and only the "overflow" would move up to the next line.
AutoCAD 2010 :: Opening Multiline Text Editor With Shortcut Key?
Oct 8, 2013Within the enhanced attribute editor dialogue, I am wondering if there is a way to open up the multiline text editor with a keyboard shortcut, vs.. having to mouse click on the open editor box? The reason being, I can quickly fill out attributes that are single line text, but get hemmed up with having to stop and open up the multiline....
View 3 Replies View RelatedAutoCAD Architecture :: Blurry Ribbon After Editing / Creating Multiline Text
Dec 7, 2011I use Autcad Architecure 2010 on my computer.
After I created or made a multiline text, the ribbon in autocad is getting all blurry. None of the icons in the ribbon will work (see attached picture).
I always have to shut down Autocad and restart it to continue my work.
AutoCAD 2010 :: Multiline Attributes Won't Hold Text Formatting After BLOCKEDIT / SAVE
Mar 20, 2012Problem: Create a dynamic block with visibility, use a Multiline Attributes for text entry in to the block. I create multiple lines of text when editing the block in model space. Either with gripping the txt window width or use "Enter" to define multiple lines.... I proceed to edit the block slightly and when I close and save changes......All ML Attributes default to single line text. In turn i have to re-edit all my text.
Bugs like this are extremely painful. No rhyme or reason to them... Looking for a workaround other than using separate attributes for each line of text.
AutoCad :: Change Multiline Style At Once?
Jul 3, 2013I have drawn same multyline ( style 1) in two differance layers. Now I need to change the multyline style Type 1 to Type 2 in one layer without affecting to the other layer style.
Is thear a quick way to do this.
AutoCad :: Determine Length Of Multiline
Jul 4, 2013How to determine the length of a multiline. With a polyline if you click on it, it's length is displayed in the properties palette, but that doesn't work for a multiline as no length property shows up in the properties palette.
View 9 Replies View RelatedAutoCAD 2013 :: Multiline Attribute Anguish
Mar 15, 2013When will working with multiline attributes get easier? Having to do multiple clicks to get to a place to edit is one thing, but then you have to use multiple clicks to get out of it. Surely Autodesk can make this an easier process. It was great when these were finally added, now they just need to be more user friendly.
View 1 Replies View RelatedAutoCAD Map 3D :: Multiline Style Definition Cannot Be Deleted
Feb 9, 2012I have created a mlstyle definition.
It is not set current and It is not in use in the dwg, but when I open the mlstyle dialog box, I cannot delete the style.
AutoCAD Architecture :: Multiline Attribute Keeps Moving?
Jul 11, 2007I'm getting a little frustrated with the multiline attribute. Every time a place it in a block and save the file, the tag moves to the left when I re-open the block file or try to insert the block in another file. how to stop the tag from moving? FYI Locking the tags position makes no difference.
View 9 Replies View RelatedAutoCAD LT :: Multiline Attribute Mask With Multileader
Feb 10, 2010I've created tags with text below them. The text is a multline attribute. I save the block with the background mask on.
When I add these blocks to multileader styles, that setting is lost and even after creating a multileader, editing the multiline attribute and turning the mask back on, the setting will not save for some reason.
One very noticeable affect of losing the background mask is that when one is editing the multiline attribute AutoCAD leaves the original text visible and overlaying the text that is updating. This makes it nearly impossible to see the edits one is making. One has to set the background mask every time they edit that multileader if they need to change the text in the mutliline attribute.
Using AutoCAD LT 2010.
AutoCad :: Multiline Attribute Line Spacing?
May 8, 2012it's possible to manipulate the vertical line spacing of multiline attributes within a block?
View 0 Replies View RelatedAutoCAD LT :: 2012 Multiline Attribute - Mtext Grips
May 2, 2012When I select a block that contains a multiline attribute my AutoCAD does not display the corner grips of the attribute if its location is "locked" in the block. Is there a setting I can change to show grips in 2012? Apparently a co-worker of mine that uses 2011 has grips when selecting the block.
If I unlock the location I have grips (not the same ones I am used to seeing from mtext though) but I do not want the attribute location unlocked..I was understanding that the multiline attribute was simply an attribute containing an mtext.
AutoCAD .NET :: Multiline Attributes Revert To Single Line
Nov 12, 2013I am experiencing this issue every now and then and I don't know why or how it happens. No modifications to the BlockDefinitions or any BlockReferences are made and for some magic all multiline attributes in the drawing file revert to single line. After that happens the only way I know to fix them is to go through all definitions in the Block Attribute Manager and make every attribute multiline again. This is very annoying because I don't know how it happens so it can be prevented and because it takes time to fix them again. AutoCAD 2012 (Mechanical) on Windows 7 32 and 64 bits.
View 3 Replies View RelatedAutoCAD 2013 :: Multiline Attributes Don't Stay Put - They Just Keep Moving
Apr 23, 2013I am well aware this has been an issue for awhile and supposedly fixed in 2008 SP1.
But we are running Civil 3d 2013. and still getting this issue.
The Multiline Attributes in our title blocks keep moving themselves randomly upon reentering the drawing.
Any clear cut solution for rectifying this problem?
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
AutoCAD 2013 :: Width Factor Of Multiline Attribute?
Apr 28, 2013I was trying to find out, how to change the width factor of multiline attribute and I failed.
The only way was to change the width factor of texstyle the attribute uses.
Is there a way to override this property for a single attribute? And if not, is there some reason for that?
